Reference electrode hydrogen electrode

Ion-selective electrodes are a relatively cheap approach to analysis of many ions in solution. The emf of the selective electrode is measured relative to a reference electrode. The electrode potential varies with the logarithm of the activity of the ion. The electrodes are calibrated using standards of the ion under investigation. Application is limited to those ions not subject to the same interference as ion chromatography (the preferred technique), e.g. fluoride, hydrogen chloride (see Table 10.3). 

Next we discuss four types of reference electrodes hydrogen, calomel, silver-silver chloric, and mercury-mercurous sulfate electrodes. 

The measurement of pH is carried out using a sensing electrode, which is sensitive to hydrogen-ion activity and a reference electrode. Combination electrodes incorporating both of these electrodes are also suitable for most applications. Separate reference and sensing electrodes are normally used only for high-precision research applications. 

In a cell with a semiconductor electrode and the reference normal hydrogen electrode, at which the reaction takes place... 

A mercury-sulfate electrode served as a reference electrode. All electrode potentials are referred to the potential of the reversible hydrogen electrode in the same electrolyte and at the same temperature as the test electrode. Adsorption measurements were performed in the 0.5 M H2SO4 solution prepared using special purity B-5 sulfuric acid and water doubly-distilled. To remove oxygen dissolved in the electrolyte, pure helium or argon was bubbled through acid solution. 

Reference electrode An electrode whose potential relative to the standard hydrogen electrode is known and against which potentials of unknown electrodes may be measured the potential of a reference electrode is completely independent of the analyte concentration. 

Fig. 5. Activity of HF-treated (Cu,oo-xPdx) Zr67 amorphous alloys in formaldehyde and fromate ion electrooxidation as a function of palladium concentration [O, 0.3M H2CO , 0.3Af HCOONa (I.OAf NaOH, 0.3 V) (reference reversible hydrogen electrode), 303 K]. (Reprinted from Ref. 110 with permission of Elsevier Sequoia, S.A.)...

Standard reference standard hydrogen electrode (SFIE = 0.0 V)... 

Since it is not possible to measure a single electrode potential, one electrode system must be taken as a standard and all others measured relative to it. By international agreement the hydrogen electrode has been chosen as the reference ... 

Standard Hydrogen Electrode The standard hydrogen electrode (SHE) is rarely used for routine analytical work, but is important because it is the reference electrode used to establish standard-state potentials for other half-reactions. The SHE consists of a Pt electrode immersed in a solution in which the hydrogen ion activity is 1.00 and in which H2 gas is bubbled at a pressure of 1 atm (Figure 11.7). A conventional salt bridge connects the SHE to the indicator half-cell. The shorthand notation for the standard hydrogen electrode is... 

The mercurous sulfate [7783-36-OJ, Hg2S04, mercury reference electrode, (Pt)H2 H2S04(y ) Hg2S04(Hg), is used to accurately measure the half-ceU potentials of the lead—acid battery. The standard potential of the mercury reference electrode is 0.6125 V (14). The potentials of the lead dioxide, lead sulfate, and mercurous sulfate, mercury electrodes versus a hydrogen electrode have been measured (24,25). These data may be used to calculate accurate half-ceU potentials for the lead dioxide, lead sulfate positive electrode from temperatures of 0 to 55°C and acid concentrations of from 0.1 to Sm. 

The thermodynamics of electrochemical reactions can be understood by considering the standard electrode potential, the potential of a reaction under standard conditions of temperature and pressure where all reactants and products are at unit activity. Table 1 Hsts a variety of standard electrode potentials. The standard potential is expressed relative to the standard hydrogen reference electrode potential in units of volts. A given reaction tends to proceed in the anodic direction, ie, toward the oxidation reaction, if the potential of the reaction is positive with respect to the standard potential. Conversely, a movement of the potential in the negative direction away from the standard potential encourages a cathodic or reduction reaction. 

Ion-selective electrodes are available for the electro analysis of most small anions, eg, haUdes, sulfide, carbonate, nitrate, etc, and cations, eg, lithium, sodium, potassium, hydrogen, magnesium, calcium, etc, but having varying degrees of selectivity. The most successful uses of these electrodes involve process monitoring, eg, for pH, where precision beyond the unstable reference electrode s abiUty to deUver is not generally required, and for clinical apphcations, eg, sodium, potassium, chloride, and carbonate in blood, urine, and semm. 

The redox potential is determined with a probe consisting of a platinum electrode and a Hg/Hg2Cl2 Cl or Ag/Ag Cl—Cl reference electrode. If Ep is the potential of the platinum probe, Ej the potential of the reference electrode and tne redox potential of the soil (in mV on the hydrogen scale) then... 

Finally, calomel electrodes (and more especially hydrogen electrodes) are not suitable for field measurements because they are not sufficiently robust. The calomel electrodes are however essential for calibrating the field reference electrodes. Saturated KCI calomel electrodes are the most suitable because there is then no doubt about the reference potential of the calibrating electrode. Lack of adequate calibration is a common cause of cathodic protection system mismanagement. 

Since the single potential of a metal cannot be measured it is necessary to use a suitable reference elecrode such as the Hg/Hg2Cl2/KCl electrode or the Ag/AgCl/KCl electrode, and although potentials are frequently expressed with reference to the standard hydrogen electrode (S.H.E.) the use of this electrode in practice is confined to fundamental studies rather than testing. 

The anode compartment contains a reference electrode and counterelectrode and by means of a potentiostat the anode side is maintained at a constant potential. The coverage of adsorbed hydrogen on the cathode side will depend on the current density i and the nature of the electrolyte solution, and the cell can be used to study the effect of a variety of factors (composition and structure of alloys, pH of solution, effect of promoters and inhibitors) on hydrogen permeation. 

It is apparent that since the electrode potential of a metal/solution interface can only be evaluated from the e.m.f. of a cell, the reference electrode used for that purpose must be specified precisely, e.g. the criterion for the cathodic protection of steel is —0-85 V (vs. Cu/CuSOg, sat.), but this can be expressed as a potential with respect to the standard hydrogen electrode (S.H.E.), i.e. -0-55 V (vs. S.H.E.) or with respect to any other reference electrode. Potentials of reference electrodes are given in Table 21.7. 

---