Hydrogen dense

Besides Pd and its alloys, other dense metal materials are also possible candidates for sq>aration of fluid components. Notable examples are tantalum, vanadium and niobium which have high selectivities for hydrogen. Dense silver is known to be permselective to oxygen gas. 

Trunsition-MetnlHydrides, Tiansition-metal hydiides, ie, inteistitial metal hydrides, have metalhc properties, conduct electricity, and ate less dense than the parent metal. Metal valence electrons are involved in both the hydrogen and metal bonds. Compositions can vary within limits and stoichiometry may not always be a simple numerical proportion. These hydrides are much harder and more brittie than the parent metal, and most have catalytic activity. 

Ceramic, Metal, and Liquid Membranes. The discussion so far implies that membrane materials are organic polymers and, in fact, the vast majority of membranes used commercially are polymer based. However, interest in membranes formed from less conventional materials has increased. Ceramic membranes, a special class of microporous membranes, are being used in ultrafHtration and microfiltration appHcations, for which solvent resistance and thermal stabHity are required. Dense metal membranes, particularly palladium membranes, are being considered for the separation of hydrogen from gas mixtures, and supported or emulsified Hquid films are being developed for coupled and facHitated transport processes. 

Pulsed plasmas containing hydrogen isotopes can produce bursts of alpha particles and neutrons as a consequence of nuclear reactions. The neutrons are useful for radiation-effects testing and for other materials research. A dense plasma focus filled with deuterium at low pressure has produced 10 neutrons in a single pulse (76) (see Deuterium AND TRITIUM). Intense neutron fluxes also are expected from thermonuclear fusion research devices employing either magnetic or inertial confinement. 

Coesite. Coesite, the second most dense (3.01 g/cm ) phase of silica, was first prepared ia the laboratory by heating a mixture of sodium metasibcate and diammonium hydrogen phosphate or another mineraliser at 500—800°C and 1.5—3.5 GPa (14,800—34,540 atm). Coesite has also been prepared by oxidation of silicon with silver carbonate under pressure (67). The stmcture is monoclinic = 717 pm, Cg = 1.238 pm, and 7 = 120°. 

Sihcon carbide is comparatively stable. The only violent reaction occurs when SiC is heated with a mixture of potassium dichromate and lead chromate. Chemical reactions do, however, take place between sihcon carbide and a variety of compounds at relatively high temperatures. Sodium sihcate attacks SiC above 1300°C, and SiC reacts with calcium and magnesium oxides above 1000°C and with copper oxide at 800°C to form the metal sihcide. Sihcon carbide decomposes in fused alkahes such as potassium chromate or sodium chromate and in fused borax or cryohte, and reacts with carbon dioxide, hydrogen, ak, and steam. Sihcon carbide, resistant to chlorine below 700°C, reacts to form carbon and sihcon tetrachloride at high temperature. SiC dissociates in molten kon and the sihcon reacts with oxides present in the melt, a reaction of use in the metallurgy of kon and steel (qv). The dense, self-bonded type of SiC has good resistance to aluminum up to about 800°C, to bismuth and zinc at 600°C, and to tin up to 400°C a new sihcon nitride-bonded type exhibits improved resistance to cryohte. 

The density of a vapour or gas at eonstant pressure is proportional to its relative moleeular mass and inversely proportional to temperature. Sinee most gases and vapours have relative moleeular masses greater than air (exeeptions inelude hydrogen, methane and ammonia), the vapours slump and spread or aeeumulate at low levels. The greater the vapour density, the greater the tendeney for this to oeeur. Gases or vapours whieh are less dense than air ean, however, spread at low level when eold (e.g. release of ammonia refrigerant). Table 6.1 ineludes vapour density values. 

Provide a high level of general ventilation taking note of density and volume of gas likely to develop initially gases will slump, while those less dense than air (e.g. hydrogen, helium) will eventually rise. 

Chemical Reactivity - Reactivity with Wo/er.- Reacts with moisture in air forming a dense white fume. Reaction with liquid water gives off heat and forms hydrochloric acid Reactivity with Common Materials The acid formed by reaction with moisture attacks metals, forming flammable hydrogen gas Stability During Transport Stable Neutralizing Agents for Acids and Caustics Acid formed by the reaction with water can be neutralized by limestone, lime, or soda ash Polymerization Not pertinent Inhibitor of Polymerization Not pertinent. 

Hydrogen peroxide, when pure, is an almost colourless (very pale blue) liquid, less volatile than water and somewhat more dense and viscous. Its more important physical properties are in Table 14.11 (cf. H2O, p. 623). The compound is miscible with water in all proportions and forms a hydrate H2O2.H2O, mp —52°. Addition of water increases the already high dielectric constant of H2O2 (70.7) to a maximum value of 121 at 35% H2O2, i.e. substantially higher than the value of water itself (78.4 at 25°). 

Inertial confinement fusion has long succeeded in the context of militai y explosions—the hydrogen bomb. In the militai y application a fission bomb produces x-rays that drive an implosion of D-T fuel to enormous temperatures and densities such that fusion reactions occur during the short time that inertia keeps the fusing nuclei densely packed and hot. 

Antimony pyrogallate, Sb(C6H503). Antimony(III) salts in the presence of tartrate ions may be quantitatively predpitated with a large excess of aqueous pyrogallol as the dense antimony pyrogallate. The method fadlitates a simple separation from arsenic the latter element may be determined in the filtrate from the predpitation of antimony by direct treatment with hydrogen sulphide. 

---