Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Pressure-sensitive hot melt

D.K. Fisher, Hot melt pressure sensitive adhesive composition for attaching roofing membranes, US Patent 6794449, assigned to Adco Products, Inc. (Michigan Center, MI), September 21, 2004. [Pg.184]

Additional block terpolymers containing propyl acrylate and star block terpo-lymers containing styrene were previously prepared by the author [2] and used in hot-melt pressure-sensitive and heat-activatable adhesives. [Pg.13]

Hot-melt pressure-sensitive adhesives (spray application). [Pg.117]

Adhesive - A material, usually polymeric, capable of forming permanent or temporary surface bonds with another material as-is or after processing such as curing. Used for bonding and joining. Some of the classes of adhesives include hot-melt, pressure-sensitive, contact, UV cured, emulsion, etc. [Pg.521]

Good processing characteristics Adhesives can be supplied as contact bonding types—either in water- or solvent-based systems—hot-melt, pressure sensitive, or as reactive systems—either 100% solids content or solvent based. [Pg.521]

The major differences between solvent-based and hot-melt pressure-sensitive adhesives is that with hot melts the viscosity can no longer be controlled with solvents, and must, instead, be controlled either by temperature or by formulating. A further limitation is that waxes cannot, in general, be used for reducing viscosity as is the case with conventional hot melts, as waxes tend to reduce tack drastically. Hence the major influence on viscosity in the formulation must come from the choice and quantity of tackifier resin. [Pg.827]

CAS 805(W) 7 EINECS/ELINCS 232475-7 Uses Resin tackifier for hot-melt pressure-sensitive adhesives, disposable prods., spedalty packaging adhesives, film laminations, sealants, solv.-based sealants and adhesives, textile sizing agents, coatings Properties Sol. in min. spirits, toluol, ethyl acetate, acetone partially sol. in ethyl alcohol soften, pt. (R B) 82 C min. add no. 7 max. Estisurf F1223 [Haltermann GmbH]... [Pg.341]

Uses Used in adhesives (hot melt pressure sensitive, mastic, pressure... [Pg.500]

Chem. Descrip. Alkylated petrol, hydrocarbon resin Uses Adhesives (hot-melt pressure-sensitive, mastic) coatings (aluminum, emulsion, industrial, marine, paper, traffic, wire/cable) inks rubber (cements, mechanical and molded goods, tires) concrete-curing compds. caulking compds. plasticizer, softener, processing aid in rubber compds. food-contact adhesives, rubber articles, wood preservatives... [Pg.567]

Uses Plasticizer, tackifler, processing aid in nitrile rubber tackifler in adhesives (hot-melt, hot-melt pressure-sensitive, pressure-sensitive) diluent, modifier in epoxy coatings rubber cements antiskinning agent in varnishes food pkg. adhesives, rubber articles Regulatory FDA 21 CFR 175.105,177.2600 Properties Gardner 8 liq. sol. in alcohols, esters, ethers, ketones (except acetone), and chlorinated, aromatic, naphthenic, and terpene hydrocarbons m.w. 250 sp.gr. 1.091 soften. (R B) pt. 12 C iodine no. (Wijs) 80 hyd. no. 200 flash pt. (COC) 365 F Nevoxy EPX-L [Neville]... [Pg.567]

Uses Epoxy modifier esp. suited for use in wh. and pastel coatings, and in hot-melt, hot-melt pressure-sensitive, and pressure-sensitive adhesives... [Pg.567]

See other pages where Pressure-sensitive hot melt is mentioned: [Pg.299]    [Pg.183]    [Pg.166]    [Pg.252]    [Pg.188]    [Pg.482]    [Pg.299]    [Pg.1176]    [Pg.229]    [Pg.230]    [Pg.265]    [Pg.835]    [Pg.266]    [Pg.310]    [Pg.499]    [Pg.499]    [Pg.500]    [Pg.567]    [Pg.567]    [Pg.567]    [Pg.567]    [Pg.567]    [Pg.568]    [Pg.578]    [Pg.578]    [Pg.579]    [Pg.579]    [Pg.579]    [Pg.579]    [Pg.579]    [Pg.579]    [Pg.579]   
See also in sourсe #XX -- [ Pg.259 , Pg.418 ]



SEARCH



MELT PRESSURE

Melt-pressure sensitivity

PRESSURE-SENSITIVE

Pressure melting

Pressure sensitive hot-melt adhesives

Sensitivity pressure

© 2024 chempedia.info