High metallic alloys/coatings

Intermetallic compounds with gallium are used as semiconductors. Indium is used to coat other metals to protect against corrosion, especially in engine bearings it is also a constituent of low-metal alloys used in safety sprinklers. The toxicity of thallium compounds has limited the use of the metal, but it does find use as a constituent of high-endurance alloys for bearings. 

The head of the femoral component then articulates with an ion-bombarded, HDPE, high walled, acetabular liner which fits iato a screwed ia, machined, titanium, chromium—cobalt—molybdenum or vanadium—aluminum metallic alloy hydroxyapatite-coated acetabular shell/cup. Each of the separate parts of the modular system for total hip arthroplasty is manufactured ia several different sizes. 

The modern motor car is made from steel, zinc or zinc alloy-coated steel and some plastic parts, all of which require painting. The main component is the body shell, made from the above metals, and this is coated in a continuous production process. A full finishing system with all four coatings is usually applied for maximum protection and a high quality appearance. 

Shiny silvery metal that is relatively soft in its pure form. Forms a highly resistant oxide coat. Used mainly in alloys, for example, in construction steel. Tiny amounts, in combination with other elements such as chromium, makes steel rustproof and improves its mechanical properties. Highly suited for tools and all types of machine parts. Also applied in airplane turbines. Chemically speaking, the element is of interest for catalysis (for example, removal of nitric oxides from waste gases). Vanadium forms countless beautiful, colored compounds (see Name). Essential for some organisms. Thus, natural oil, which was formed from marine life forms, contains substantial unwanted traces of vanadium that need to be removed. 

The structure of a SPE cell is shown in Fig. 2.3. The basic unit of a SPE electrolyzer is an electrode membrane electrode (EME) structure that consists of the polymer membrane coated on either side with layers (typically several microns thick) of suitable catalyst materials acting as electrodes [43,49,50], with an electrolyzer module consisting of several such cells connected in series. The polymer membrane is highly acidic and hence acid resistant materials must be used in the structure fabrication noble metals like Pt, Ir, Rh, Ru or their oxides or alloys are generally used as electrode materials. Generally Pt and other noble metal alloys are used as cathodes, and Ir, Ir02, Rh, Pt, Rh-Pt, Pt-Ru etc. are used as anodes [43,46]. The EME is pressed from either side by porous, gas permeable plates that provide support to the EME and ensure... 

Metal powder-coated, through-hardened materials - these materials have been found useful when an alloy does not provide adequate forged quality and for cast materials with specific casting problems. Very fine and very even carbide distribution throughout the entire component offers economically viable (in production terms) and effective wear resistance (temperable matrix with high carbide content). Preferred materials include vanadium-alloyed tool steels. 

---