Halogenation thionyl chloride

Hydroxyalkylthiazoles are also obtained by cyclization or from alkoxyalkyl-thiazoles by hydrolysis (36, 44, 45, 52, 55-57) and by lithium aluminium hydride reduction of the esters of thiazolecarboxylic acids (58-60) or of the thiazoleacetic adds. The Cannizzaro reaction of 4-thiazolealdehyde gives 4-(hydroxymethyl)-thiazole (53). The main reactions of hydroxyalkyl thiazoles are the synthesis of halogenated derivatives by the action of hydrobroraic acid (55, 61-63), thionyl chloride (44, 45, 63-66), phosphoryl chloride (52, 62, 67), phosphorus penta-chloride (58), tribromide (38, 68), esterification (58, 68-71), and elimination that leads to the alkenylthiazoles (49, 72). 

Direct halogenation of sucrose has also been achieved using a combination of DMF—methanesulfonyl chloride (88), sulfuryl chloride—pyridine (89), carbon tetrachloride—triphenylphosphine—pyridine (90), and thionyl chloride—pyridine—1,1,2-trichloroethane (91). Treatment of sucrose with carbon tetrachloride—triphenylphosphine—pyridine at 70°C for 2 h gave 6,6 -dichloro-6,6 -dideoxysucrose in 92% yield. The greater reactivity of the 6 and 6 primary hydroxyl groups has been associated with a bulky halogenating complex formed from triphenylphosphine dihaUde ((CgH )2P=CX2) and pyridine (90). 

Halogens add to the double bond of the alcohol to afford the corresponding dihalo derivatives, eg, CgH CHXCHXCH20H, where X = Cl or Br. The allyHc chloride C H Cl [2687-12-9] can be obtained by treatment of the alcohol with hydrochloric acid, thionyl chloride, or carbon tetrachloride—triphenylphosphine as the halogen donor. 

Reductive ring closure with thionyl chloride led to the introduction of a chloro group in the 5-position. When the 5-position was blocked by a substituent, halogen attack occurred in the 7-position. The mechanism is shown in Scheme 177 (67AHC(8)277>. 

Jsomerides of Morphine and Codeine. When morphine is treated with thionyl chloride, phosphorus trichloride or tribromide, the alcoholic hydroxyl group is replaced by the halogen, forming a-chloromorphide and bromomorphide respectively. The former on treatment with concentrated hydrochloric acid is converted into /3-chloromorphide. Schopf and Hirsch have provided evidence that the two are structural isomerides. With the same reagents codeine yields a parallel set of compounds, viz., a- and -chlorocodides, and bromocodide. The chief characteristics of these products may be summarised thus —... 

Condensation of normeperidine (81) with 3-chloropropan-l-ol affords the compound possessing the alcohol side chain (88). The hydroxyl is then converted to chlorine by means of thionyl chloride (89) displacement of the halogen by aniline yields pimino-dine (90). ° Condensation of the secondary amine, 81, with styrene oxide affords the alcohol, 91 removal of the benzyllic hydroxyl group by hydrogenolysis leads to pheneridlne (92). ... 

Treatment of pyridyl carbinol 51 with thionyl chloride leads to the corresponding chloride (52), Treatment of that intermediate with 5-methoxy-2-mercaptobenzimidazole (53), obtained from reaction of 4-methoxy-q-phenylenediamine with potassium ethylxanthate leads to displacement of halogen and formation of the sulfide (54). Finally, oxidation with 3-chloroperbenzoic acid produces the sulfoxide omeprazole (55) fl7]. 

A classical procedure for the synthesis of the A-(1-chloroalkyl)amides1 or carbamates68 involves substitution of the hydroxy group in stable A-( 1-hydroxyalkyl)amides (or carbamates) by a halogen function with reagents such as thionyl chloride, phosphorus pentachloride, phosphorus pentabromide, etc. In certain cases merely heating in concentrated hydrochloric or hydrobromic acid suffices1. 

Alcohols are commonly converted into the corresponding halogen on treatment with agents such as thionyl chloride in order to provide suitable sites for further variation in functionality. For example, treatment of primary alcohol 81 with thionyl chloride leads to chloro derivative 82 (Equation 16) <1997JME2196>. 

Tellurium Tetrahydrofuran Tetranitroaniline Tetranitromethane Thiocyanates Thionyl chloride Thiophene Thymol Halogens, metals Tetrahydridoaluminates, KOH, NaOH Reducing materials Aluminum, cotton, aromatic nitro compounds, hydrocarbons, cotton, toluene Chlorates, nitric acid, peroxides Ammonia, dimethylsulfoxide, linseed oil, quinoline, sodium Nitric acid Acetanilide, antipyrine, camphor, chlorohydrate, menthol, quinine sulfate, ure- thene... 

In contrast to uridine,389 cytidine does not yield a 5 -chloro-5 -deoxy derivative on reaction with N,N-dimethyl(chlorometh-animinium) chloride instead 2,2 -anhydrocytidine is formed.395 However, thionyl chloride or bromide in hexamethylphosphor-amide at room temperature achieves this selective replacement of the primary hydroxyl group of halogen in cytidine, and also in adenosine, in respective yields of 80 and 75% for the chloro compounds, and 55 and 30% for the bromo analogs.396... 

Modification Using a Halogenated Silica Surface. Silica gel is heated in 2 m HC1, filtered off, and washed with water the dried silica gel is then reacted with pure thionyl chloride. After removal of the excess of thionyl chloride and byproducts (S02 and HC1) under vacuum, chlorinated silica gel (=SiCl) is obtained. This is unstable in water and alcohol. The chlorinated silica gel can then be alkylated by one of a number of different reactions ... 

An unsuccessful attempt to repeat this reaction was made by Bird however, he was able to show that dibenzothiophene 5-oxide did, in fact, react with either thionyl chloride or phosphorus oxychloride to yield 2-chlorodibenzothiophene in good yield. Since all methods of nitration of dibenzothiophene yield a mixture of 2-nitrodibenzothio-phene and dibenzothiophene 5-oxide, which have identical melting points, it was concluded that the earlier workers had in fact been working with the sulfoxide and not the nitro compound. The reaction was rationalized as being a deoxygenative halogenation of a heterocyclic 5-oxide akin to the Meisenheimer reaction of A-oxides, which already had precedents in the sulfoxide field. Unfortunately the 2-chlorodibenzothiophene prepared by this route is contaminated with 2,8-dichlorodibenzothiophene which cannot be removed by crystallization. The best method of preparation of this compound is therefore via a Sandmeyer reaction on 2-aminodibenzothiophene. ... 

---