Halogenation and Deoxygenation

5-Dialkylpyrazines as their mono- and di-A -oxides are smoothly converted by phosphoryl chloride into 2-chloro- and 2,5-dichloro-3,6-dialkylpyrazines, respectively (740). Thus 2,5-dimethylpyrazine 1-oxide with phosphoryl chloride gives 3-chloro-2,5-dimethylpyrazine in 85% yield (612, 740), but 2,5-dimethylpyrazine di-A -oxide gave a low yield of 2,5-dichloro-3,6-dimethylpyrazine which was not increased when sulfuryl chloride was used in place of phosphoryl chloride. Similar 

Matsuura and co-workers (756) have reexamined the reactions of the A -oxides of 2,5-dimethylpyrazine and found that 2,5-dimethylpyrazine di-A -oxide (29) when heated with phosphoryl chloride at 160° gave 2,5-dichloro-3,6-dimethylpyrazine (6%) (30), 3-chloro-2,5-dimethylpyrazine 1-oxide (5%) (31), and 5-chloromethyl-2-methylpyrazine 1 -oxide (9%) (32). In addition small amounts of other chlorinated products, 3-chloro-2-chloromethyl-5-methylpyrazine (33) and 2,5-bischloromethyl-pyrazine (34), were identified. These authors also examined the action of p-tosyl chloride, methane sulfonyl chloride, and mixtures of phosphoryl chloride and concentrated sulfuric acid, but state that these did not give good results. Pyrazine 1-oxide and phosphoryl chloride have been shown to give 2 hloropyrazine and pyrazine 1,4-dioxide gave 2,6-dichloropyrazine (737,757), but under milder reaction conditions it gave 2-chloropyrazine 1-oxide (757). Pyrazine 1,4-dioxide and benzenesulfonyl chloride also gave a low yield of 2-chloropyrazine 1-oxide (758). 

Both 2-methylpyrazine 1- and 4-oxides (625) (obtained by oxidation of 2-methyl-pyrazine with peroxyacetic acid) on treatment with phosphoryl chloride have been claimed to give 2-chloro-3-methylpyrazine(626)but the 2-methylpyrazine-4-oxide used is now known to have been a mixture of the 1- and 4-isomers (734). More recently other workers (735, 736) have claimed that the mixed 2-methylpyrazine 7V-oxides with phosphoryl chloride gave a mixture of 2-chloro-3-, -5-, and -6-methylpyrazine but Nakel and Haynes (686) have shown that 2-methylpyrazine 1-oxide with phosphoryl chloride followed by sodium methoxide gave 2-methoxy-3-methylpyrazine and 6-methoxy-2-methylpyrazine, and 2-methylpyrazine 4-oxide (3-methylpyrazine 1-oxide) similarly treated gave only 2-methoxy-6-methylpyrazine. 3-Trifluoromethylpyrazine 1-oxide with benzenesulfonyl chloride at 1(X)° has been shown to give 2-chloro-6-trifluoromethylpyrazine (44%) (759). 

2-Methylpyrazine 1,4-dioxide with phosphoryl chloride gives a mixture of 

---

Solutions of low-valence titanium chloride (titanium dichloride) are prepared in situ by reduction of solutions of titanium trichloride in tetrahydrofuran or 1,2-dimethoxyethane with lithium aluminum hydride [204, 205], with lithium or potassium [206], with magnesium [207, 208] or with a zinc-copper couple [209,210]. Such solutions effect hydrogenolysis of halogens [208], deoxygenation of epoxides [204] and reduction of aldehydes and ketones to alkenes [205,... 

The saccharides represent a structurally diverse group of compounds, which are often derivatised with a variety of functional groups. The chemical modification of saccharides often involves the installation of a functional group that at an appropriate time can be converted into another functionality. In this chapter, synthetic methodologies for the preparation of halogenated, unsaturated and deoxygenated sugar derivatives will be discussed and furthermore methods for the introduction of amino, sulfate and phosphate moieties will be covered. 

The arsenic and antimony pentahalides EX5 (E group 15 element As or Sb X = F or Cl) are strong, irreversible oxidants the gas AsFs has little been used, but SbCF and SbFs are commercially available, very air-sensitive liquids which are used in dry and deoxygenated dichloromethane and liquid sulfur dioxide respectively. SbCls is easier to handle than SbFs which gives the dangerous HF by reaction with moist air. Moreover, SbCls is conveniently used in dichloromethane whereas SbFs is best used in liquid SO2. On the other hand, the side products (halogenation) are more frequently encountered with SbCls than with SbFs. The redox process follows ... 

Phosphorus trihalides can in some cases be used to halogenate alcohols (12.282) and to convert nitro compounds into cyanides (12.283). Carboxylic acids are converted to acyl halides (12.284) and deoxygenations can sometimes be effected (12.285). The triiodide is a useful deoxygenating agent. 

Through our combined efforts in phosphorylation, acylation, deoxygenation, halogenation, and cross-coupling, we reported and evaluated the antimicrobial activity of several dozen glycopeptide analogs, whose availability is enhanced by site-selective peptide-catalyzed reactions (Fig. 11). Our hope is that these results represent an auspicious set of data to justify further studies of this type. 

An unsuccessful attempt to repeat this reaction was made by Bird however, he was able to show that dibenzothiophene 5-oxide did, in fact, react with either thionyl chloride or phosphorus oxychloride to yield 2-chlorodibenzothiophene in good yield. Since all methods of nitration of dibenzothiophene yield a mixture of 2-nitrodibenzothio-phene and dibenzothiophene 5-oxide, which have identical melting points, it was concluded that the earlier workers had in fact been working with the sulfoxide and not the nitro compound. The reaction was rationalized as being a deoxygenative halogenation of a heterocyclic 5-oxide akin to the Meisenheimer reaction of A-oxides, which already had precedents in the sulfoxide field. Unfortunately the 2-chlorodibenzothiophene prepared by this route is contaminated with 2,8-dichlorodibenzothiophene which cannot be removed by crystallization. The best method of preparation of this compound is therefore via a Sandmeyer reaction on 2-aminodibenzothiophene. ... 

Divalent chromium reduces triple bonds to double bonds (trans where applicable) [195], enediones to diones [196], epoxides to alkenes [192] and aromatic nitroso, nitro and azoxy compounds to amines [190], deoxygenates amine oxides [191], and replaces halogens by hydrogen [197,198],... 

The only alkyl group reported as reductively removed is the di-phenylmethyl substituent from N3 in compound 165.153 Deoxygenation of N-oxides can be done thermally (heating in toluene with oxygen transfer to solvent) for compounds of type 166,44 or more commonly by use of phosphorus derivatives, as described for compounds 32, 33,45 166,44 and 167.61 Halogens can be reductively removed from [l,2,3]triazolo-[4,5-6]pyridines 160,146 168,220 and 169,142 and from pentachloro derivative 164, giving dichloro compound 170.208 Removal of thiol groups by reduction... 

There are several reports of the deoxygenative halogenation of quinoxaline A-oxides. Thus, 3-(o-hydroxyphenyl)quinoxaline 1-oxide with sulfuryl chloride furnishes 2-chloro-3-(o-hydroxyphenyl) quinoxaline,51 and 2,3-diphenylquinoxaline 1-oxide with phosphoryl... 

In the preactivation phase, reductive deoxygenation of the catalyst surface takes place with formation of carbon dioxide and other oxidation products.3 This reduced surface then reacts with haloalkanes, and carbon monoxide and a halogenated, catalytically active surface is formed. 

Substituted 1,2,3-triazole 1-oxides 448 have been reported to undergo electrophilic and nucleophilic aromatic substitution and are subject to debromination, proton-metal exchange, and halogen-metal exchange followed by electrophilic addition. Transmetallation and cross-coupling have not been described. 3-Substituted 1,2,3-triazole 1-oxides 448 can be proton-ated or alkylated at the O-atom and they can be deoxygenated and deal-kylated. The individual reactions are described in Section 4.2.7.1-4.2.7.14. 

---