Green machining

3 If the total volume shrinkage for a ceramic part, having an as-formed volume of 50 g/cc, is 50%, what will be its final volume [Pg.252]

5 Two different processes are used to make the alumina product. Process 1 Green density (Dg) = 2.43 Mg/m [Pg.252]

Carter and M. G. Norton, Ceramic Materials—Science and Engineering, Springer, New York, 2007, pp. 412-421. [Pg.253]

Principles of Ceramics Processing, 2nd Edn., A Wiley-Interscience Publication, John Wiley, New York, 1995, pp. 411-412, 416-417. [Pg.253]

Toyota. (1997). Toyota s Green Machine. Business Week (December 15) 108-110. [Pg.644]

DBR Kumar, MR Reddy, VN Mulay, N Krishnamurti. Acrylic co-polymer emulsion binders for green machining of ceramics. Eur Polym J 36(7) 1503—1510, 2000. [Pg.286]

Ballard Power Systems supplied one of the first fuel cell demonstration projects for British Columbia Transit. Ballard is a pioneer and major producer of fuel cells which it installed in several Vancouver, Canada city buses. The fuel cell powered New Flier buses are much cleaner than new diesels and they are not adding to Vancouver s smog problem. A similar demonstration has taken place in Chicago, where the modified city buses have been called the Green Machines. [Pg.268]

Jaffe, Thomas. (1998). Lean green machine. Forbes. 162 90. Scotts Company. (2000). Business segments overview North American consumer (www.smgnyse.com/html/ consumerlawn.cfm). (Last accessed July, 2001)... [Pg.170]

Products often require green machining (described in Section 23.14) after pressing... [Pg.416]

In the processing of spark plug insulators the final processing step prior to firing involves green machining as shown earlier in Figure 23.5. [Pg.421]

Table 23.5 Data compiled by Larson, D. (1991) Green machining, in Engineered Materials Handbook, Ceramics and Glasses 4, ASM International, p. 184.

Milling with side milling cutters is the only technology to green machine large module... [Pg.572]

Products currently available in the market are Eco-Foam II, Accu-Shear Dual WMA System, Aquablack WMA, Double Barrel Green, Green Machine, Half-warm foamed bitumen process, HGrant Warm Mix System, Low-emission asphalt. Low-energy asphalt. Meeker warm mix, Terex WMA system. Ultrafoam GX and WAM foam (Nicholls and... [Pg.286]

Gunther, M. 2006. The Green Machine. Fortune 154(3). http //money.cnn.com/magazines/fortune/ fortune archive/2006/08/07/8382593/index.htm. [Pg.82]

Green Machining. This step eliminates rough surfaces, smooths seams, and modifies the size and shape of the green part to prepare for sintering. [Pg.282]

Cn combined with the green machining method can be applied to fabricate tubular membranes with one dead-end [27]. The uniform membrane precursor is first pressed into green cylindrical rods. A carbide bit is used to drill the rods into dead-end geometry. The dead-end tubes are then sintered and annealed at elevated temperatures into dense membranes. [Pg.154]

The wet bag process gives rise to a wide range of shapes and sizes. Tooling costs are low. The part size can be in the range of 150 mm to 2 m in diameter, and 460 mm to 3.7 m in height. However, the shape and dimensional control are poor. Because of this, green machining is needed. The cycle times are between 5 and 60 times. Hence, production rates are low. [Pg.245]

Green machining is applied to spark plug insulators. This step was shown in Figure 13.5. [Pg.252]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...