Graphitization mechanism

KINELs 5505 and 5508 are graphite filled compounds (25% and 40%, respectively). The first affords higher mechanicals, the second better wear and lubricity properties. Typical applications for KINELs 5505 emd 5508 include face seals and tiurust washers piston rings for air compressors low speed, journal bearings (speeds less than 100 fpm) ment for carbon/graphite mechanical goods. 

Glass, aramid, carbon, graphite. Mechanical strength, wear... 

Forbeaux, I. et al.. Solid-state graphitization mechanisms of silicon carbide 6H-SiC polar faces. Applied Surface Science, 2000.162 406-412. 

Petroleum coke is an excellent fuel, and that is its main use, especially for the coke from fluid coking". There are some other markets that have to do with calcined coke electrodes for aluminum production or for all other electrolytic cells, carbons for electro-mechanical equipment, graphite, and pigments. 

The structurally similar molybdenum disulfide also has a low coefficient of friction, but now not increased in vacuum [2,30]. The interlayer forces are, however, much weaker than for graphite, and the mechanism of friction may be different. With molecularly smooth mica surfaces, the coefficient of friction is very dependent on load and may rise to extremely high values at small loads [4] at normal loads and in the presence of air, n drops to a near normal level. 

Graphite exists in two forms alpha and beta. These have identical physical properties, except for their crystal structure. Naturally occurring graphites are reported to contain as much as 30% of the rhombohedral (beta) form, whereas synthetic materials contain only the alpha form. The hexagonal alpha type can be converted to the beta by mechanical treatment, and the beta form reverts to the alpha on heating it above lOOOoC. 

The water hberated during the cure has no apparent effect on the composite properties. Glass-filled composites prepared in this manner retain mechanical properties at elevated temperatures as well as solvent and flammabiUty resistance (88). PhenoHc-graphite-fiber composites that exhibit superior mechanical properties have also been prepared by this process. 

With appropriately substituted oxetanes, aluminum-based initiators (321) impose a degree of microstmctural control on the substituted polyoxetane stmcture that is not obtainable with a pure cationic system. A polymer having largely the stmcture of poly(3-hydroxyoxetane) has been obtained from an anionic rearrangement polymerisation of glycidol or its trimethylsilyl ether, both oxirane monomers (322). Polymerisation-induced epitaxy can produce ultrathin films of highly oriented POX molecules on, for instance, graphite (323). Theoretical studies on the cationic polymerisation mechanism of oxetanes have been made (324—326). 

---