GEAR integration package

The first documented use of dry gas seals in turboexpanders was in 1989. At that time, an ethylene plant in Scotland worked with a dry gas seal manufacturer to retrofit a turboexpander-integral gear-generator package. The partial success of that project was sufficiently encouraging for both user plant and turboexpander manufacturer to undertake a redesign of all three expander stages. Dry face or gas seals were installed at that time. 

Packages exist that use various discretizations in the spatial direction and an integration routine in the time variable. PDECOL uses B-sphnes for the spatial direction and various GEAR methods in time (Ref. 247). PDEPACK and DSS (Ref. 247) use finite differences in the spatial direction and GEARB in time (Ref. 66). REACOL (Ref. 106) uses orthogonal collocation in the radial direction and LSODE in the axial direction, while REACFD uses finite difference in the radial direction both codes are restricted to modeling chemical reactors. 

For both the finite difference and collocation methods a set of coupled ordinaiy differential eqiiafions results which are integrated forward in time using the method of hnes. Various software packages implementing Gear s method are popular. 

API Std 672, Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Services, 3rd Edition, September... 

Figure 4-9. An oil-flooded, Integrally geared screw compressor package. Courted ofSullair)...

API Standard 672, Packaged, Integrally Geared, Centrifugal Plant and Instrument Air Compressors for General Refinery Services, Second Edition, W shington, D C. American Petroleum Institute, 1988, Reaffirmed 199 . 

Eqns (16), (20) and (22) were integrated numerically to obtain the separation performance of the one- and two-column processes The GEAR package (13) was used for the integration after determining that it was faster than, say, Runge-Kutta methods For all calculations N 50 and e - 0.40 Dimensionless parameters varied were 8, ph pL Yf and, for the two-column process, H. Combinations of the parameters of 6 and Pr/Pl were chosen to correspond to the me thane-helium system on BPL carbon Adsorption isotherm data for methane at 25°C (14) were represented by... 

---