Gasoline isomerate

Other things equal, branched hydrocarbons have higher octane ratings than unbranched ones. —> Isomerization and aromatization are used to improve octane rating of gasoline Isomerization is used to convert straight chain hydrocarbons to branched ones ... 

Application lsomalk-2 is a broad-range isomerization technology developed by NPP Neftehim, which has been commercially proven in various regions of the world, lsomalk-2 is a competitive alternative to the three most commonly used light gasoline isomerization processes zeolite, chlorinated alumina and sulfated oxide catalysts. 

GTC Technology Isomerization Light naphtha Light gasoline isomerization processes using regenerable catalyst with superior tolerance to process impurities and water 7 2008... 

The preceding information indicates the paths to follow in order to obtain stocks of high octane number by refining. The orientation must be towards streams rich in aromatics (reformate) and in isoparaffins (isomerization, alkylation). The olefins present essentially in cracked gasolines can be used only with moderation, considering their low MONs, even if their RONs are attractive. 

As a complementary process to reforming, isomerization converts normal paraffins to iso-paraffins, either to prepare streams for other conversions nCi —> /C4 destined for alkylation or to increase the motor and research octane numbers of iight components in the gasoiine pooi, i.e., the C5 or Cs-Ce fractions from primary distillation of the crude, or light gasoline from conversion processes, having low octane numbers. 

We cite isomerization of Cs-Ce paraffinic cuts, aliphatic alkylation making isoparaffinic gasoline from C3-C5 olefins and isobutane, and etherification of C4-C5 olefins with the C1-C2 alcohols. This type of refinery can need more hydrogen than is available from naphtha reforming. Flexibility is greatly improved over the simple conventional refinery. Nonetheless some products are not eliminated, for example, the heavy fuel of marginal quality, and the conversion product qualities may not be adequate, even after severe treatment, to meet certain specifications such as the gasoline octane number, diesel cetane number, and allowable levels of certain components. 

Ethers, such as MTBE and methyl / fZ-amyl ether (TAME) are made by a catalytic process from methanol (qv) and the corresponding isomeric olefin. These ethers have excellent octane values and compete on an economic basis with alkylation for inclusion in gasoline. Another ether, ethyl tert-huty ether (ETBE) is made from ethanol (qv) and isobutylene (see Butylenes). The cost and economic driving forces to use ETBE vs MTBE or TAME ate a function of the raw material costs and any tax incentives that may be provided because of the ethanol that is used to produce it. 

Isomerization. Isomerization of low octane and / -paraffins in gasoline streams into higher octane branched isomers is an important... 

The demand for aviation gasoline during World War II was so great that isobutanc from alkylation feedstock was insufficient. This deficiency was remedied by isomerization of abundant normal butane into isobutane using the isomerization catalyst aluminum chloride on alumina promoted by hydrogen chloride gas. 

Light naphthas 80-18QT 27-82 C Light gasoline Gasoline blending or isomerization unit... 

---