Fully interconnected layers

Figure 4 a Two fully interconnected layers of PEs. b Two correspondingly connected layers of PEs. c Two round-robin-connected layers of PEs. d One layer of PEs fully connected to itself. 

In 2012, Yeh and co-workers first applied ENMs in water/ethanol pervaporation [112]. As shown in Fig. 13.16, the separation membrane system consists of a cross-linked PVA hydrophilic top layer, a cellulose nanofibrous buffer layer, an ENM layer with high porosity and fully interconnected pore structure, and a PET support layer. In water/ethanol pervaporation test, the separation factor of the new membrane could reach 80.8, and flux was 765 kg/m h, which were significantly higher than conventional membranes (e.g., Sulzer 1210). Using ENMs promised the novel pervaporation membrane a higher permeate flux than conventional ones, and using the cellulose nanofibrous layer prevented the penetration of the barrier layer. 

An ANN is a set of interconnected neurons (also termed nodes, cells, units or process elements distributed in a specific arrangement, usually termed an architecture. In general, neurons are organised in layers (see Figure 5.3).The most common neural nets, the feed-forward nets, are fully connected, i.e. each node is connected to all the nodes in the next layer. The information we want to enter in... 

Because the developer also attacks the exposed dielectric laterally, sloped-wall vias are produced. Consequently, metallization of these vias entail a metal deposition technique that fully covers the sloped wall. In addition, vias in the adjacent layers must be staggered, which decreases the interconnect density. Besides being a simple process, ease of reworking is another advantage of the utilization of a photosensitive polymer dielectric. Being able to easily remove the xmwanted dielectric layer before hard baking avoids the stripping process. 

---