Full-quantum

Altliough a complete treatment of optical phenomena generally requires a full quantum mechanical description of tire light field, many of tire devices of interest tliroughout optoelectronics can be described using tire wave properties of tire optical field. Several excellent treatments on tire quantum mechanical tlieory of tire electromagnetic field are listed in [9]. 

For larger systems, various approximate schemes have been developed, called mixed methods as they treat parts of the system using different levels of theory. Of interest to us here are quantuin-seiniclassical methods, which use full quantum mechanics to treat the electrons, but use approximations based on trajectories in a classical phase space to describe the nuclear motion. The prefix quantum may be dropped, and we will talk of seiniclassical methods. There are a number of different approaches, but here we shall concentrate on the few that are suitable for direct dynamics molecular simulations. An overview of other methods is given in the introduction of [21]. 

In the full quantum mechanical picture, the evolving wavepackets are delocalized functions, representing the probability of finding the nuclei at a particular point in space. This representation is unsuitable for direct dynamics as it is necessary to know the potential surface over a region of space at each point in time. Fortunately, there are approximate formulations based on trajectories in phase space, which will be discussed below. These local representations, so-called as only a portion of the FES is examined at each point in time, have a classical flavor. The delocalized and nonlocal nature of the full solution of the Schtddinger equation should, however, be kept in mind. 

Full quantum wavepacket studies on large molecules are impossible. This is not only due to the scaling of the method (exponential with the number of degrees of freedom), but also due to the difficulties of obtaining accurate functions of the coupled PES, which are required as analytic functions. Direct dynamics studies of photochemical systems bypass this latter problem by calculating the PES on-the-fly as it is required, and only where it is required. This is an exciting new field, which requires a synthesis of two existing branches of theoretical chemistry—electronic structure theory (quantum chemistiy) and mixed nuclear dynamics methods (quantum-semiclassical). 

The full quantum mechanical study of nuclear dynamics in molecules has received considerable attention in recent years. An important example of such developments is the work carried out on the prototypical systems H3 [1-5] and its isotopic variant HD2 [5-8], Li3 [9-12], Na3 [13,14], and HO2 [15-18], In particular, for the alkali metal trimers, the possibility of a conical intersection between the two lowest doublet potential energy surfaces introduces a complication that makes their theoretical study fairly challenging. Thus, alkali metal trimers have recently emerged as ideal systems to study molecular vibronic dynamics, especially the so-called geometric phase (GP) effect [13,19,20] (often referred to as the molecular Aharonov-Bohm effect [19] or Berry s phase effect [21]) for further discussion on this topic see [22-25], and references cited therein. The same features also turn out to be present in the case of HO2, and their exact treatment assumes even further complexity [18],... 

Bornemann, F.A., Nettesheim, R, Schiitte, C. Quantum-classical molecular dynamics as an approximation to full quantum dynamics. J. Chem. Rhys. 105 (1996) 1074-1083. 

The preferable theoretical tools for the description of dynamical processes in systems of a few atoms are certainly quantum mechanical calculations. There is a large arsenal of powerful, well established methods for quantum mechanical computations of processes such as photoexcitation, photodissociation, inelastic scattering and reactive collisions for systems having, in the present state-of-the-art, up to three or four atoms, typically. " Both time-dependent and time-independent numerically exact algorithms are available for many of the processes, so in cases where potential surfaces of good accuracy are available, excellent quantitative agreement with experiment is generally obtained. In addition to the full quantum-mechanical methods, sophisticated semiclassical approximations have been developed that for many cases are essentially of near-quantitative accuracy and certainly at a level sufficient for the interpretation of most experiments.These methods also are com-... 

This paper is meant as a contribution to systematize the quantum-classical modeling of molecular dynamics. Hence, we are interested in an extended theoretical understanding of the models rather than to further contribute to the bunch of numerical experiments which have been performed on certain models by applying them to particular molecular systems. Thus, we will carefully review the assumptions under which our models are known to approximate the full quantum dynamical (QD) evolution of the system. This knowledge... 

In a way, the limit set is thus the entire funnel between the two extreme cases qlc, and g o, Fig. 5. This effect is called Takens-chaos, [21, 5, 7]. As a consequence of this theorem each momentum uncertainty effects a kind of disintegration" process at the crossing. Thus, one can reasonably expect to reproduce the true excitation process by using QCMD trajectory bundles for sampling the funnel. To realize this idea, we have to study the full quantum solution and compare it to suitable QCMD trajectory bundles. 

In the mixed quantum-classical molecular dynamics (QCMD) model (see [11, 9, 2, 3, 5] and references therein), most atoms are described by classical mechanics, but an important small portion of the system by quantum mechanics. The full quantum system is first separated via a tensor product ansatz. The evolution of each part is then modeled either classically or quan-tally. This leads to a coupled system of Newtonian and Schrbdinger equations. 

The MEP at the molecular surface has been used for many QSAR and QSPR applications. Quantum mechanically calculated MEPs are more detailed and accurate at the important areas of the surface than those derived from net atomic charges and are therefore usually preferable [Ij. However, any of the techniques based on MEPs calculated from net atomic charges can be used for full quantum mechanical calculations, and vice versa. The best-known descriptors based on the statistics of the MEP at the molecular surface are those introduced by Murray and Politzer [44]. These were originally formulated for DFT calculations using an isodensity surface. They have also been used very extensively with semi-empirical MO techniques and solvent-accessible surfaces [1, 2]. The charged polar surface area (CPSA) descriptors proposed by Stanton and Jurs [45] are also based on charges derived from semi-empirical MO calculations. 

The same k p scheme has been extended to the study of transport properties of CNTs. The conductivity calculated in the Boltzmann transport theory has shown a large positive magnetoresistance [18], This positive magnetoresistance has been confirmed by full quantum mechanical calculations in the case that the mean free path is much larger than the circumference length [19]. When the mean free path is short, the transport is reduced to that in a 2D graphite, which has also interesting characteristic features [20]. 

Furthermore, one can infer quantitatively from the data in Fig. 13 that the quantum system cannot reach the maximum herringbone ordering even at extremely low temperatures the quantum hbrations depress the saturation value by 10%. In Fig. 13, the order parameter and total energy as obtained from the full quantum simulation are compared with standard approximate theories valid for low and high temperatures. One can clearly see how the quasi classical Feynman-Hibbs curve matches the exact quantum data above 30 K. However, just below the phase transition, this second-order approximation in the quantum fluctuations fails and yields uncontrolled estimates just below the point of failure it gives classical values for the order parameter and the herringbone ordering even vanishes below... 

If we want to calculate the potential energy curve, then we have to change the intemuclear separation and rework the electronic problem at the new A-B distance, as in the H2 calculation. Once again, should we be so interested, the nuclear problem can be studied by solving the appropriate nuclear Schrodinger equation. This is a full quantum-mechanical equation, not to be confused with the MM treatment. 

The full quantum dynamics then takes the general form... 

Figure 10. Arrhenius plot of the thermal rate constants for the 2D model system. Circles-full quantum results. Thick solid (dashed) curve present nonadiabatic transition state theory by using the seam surface [the minimum energy crossing point (MECP)] approximation. Thin solid and dashed curves are the same as the thick ones except that the classical partition functions are used. Taken from Ref. [27].

In this contribution, we describe work from our group in the development and application of alternatives that allow the explicit inclusion of environment effects while treating the most relevant part of the system with full quantum mechanics. The first methodology, dubbed MD/QM, was used for the study of the electronic spectrum of prephenate dianion in solution [18] and later coupled to the Effective Fragment Potential (EFP) [19] to the study of the Claisen rearrangement reaction from chorismate to prephenate catalyzed by the chorismate mutase (CM) enzyme [20]. 

Based on this physical view of the reaction dynamics, a very broad class of models can be constructed that yield qualitatively similar oscillations of the reaction probabilities. As shown in Fig. 40(b), a model based on Eckart barriers and constant non-adiabatic coupling to mimic H + D2, yields out-of-phase oscillations in Pr(0,0 — 0,j E) analogous to those observed in the full quantum scattering calculation. Note, however, that if the recoupling in the exit-channel is omitted (as shown in Fig. 40(b) with dashed lines) then oscillations disappear and Pr exhibits simple steps at the QBS energies. As the occurrence of the oscillation is quite insensitive to the details of the model, the interference of pathways through the network of QBS seems to provide a robust mechanism for the oscillating reaction probabilities. 

Due to the complexity of a full quantum mechanical treatment of electron impact ionization, or even a partial wave approximation, for all but relatively simple systems, a large number of semiempirical and semiclassical formulae have been developed. These often make basic assumptions which can limit their range of validity to fairly small classes of atomic or molecular systems. The more successful approaches apply to broad classes of systems and can be very useful for generating cross sections in the absence of good experimental results. The success of such calculations to reproduce experimentally determined cross sections can also give insight into the validity of the approximations and assumptions on which the methods are based. 

Let us first consider physical systems, in which quantum effects might be important, in order of decreasing effect. The prototype quantum liquid is liquid helium with its well-known exotic properties. This liquid requires a full quantum... 

Say you have performed a classical calculation to determine the excess chemical potential from the first two terms on the right side of (11.22) followed by another classical calculation to obtain an estimate of the quantum correction from the expression (11.29), and the estimated correction is large. This suggests that a full quantum treatment is necessary. In this section, we derive the appropriate formulas for changes in the excess chemical potential due to mutating masses. If the original mass is very large, which corresponds to the classical limit, the derived expressions yield the quantum correction. 

The list of fluids which exhibit important quantum effects is not large. Getting back to the original question of this chapter, it is clear that for liquids like helium and hydrogen, a full quantum treatment is necessary. Liquids such as neon and water, however, show modest quantum effects which can be modeled with approximate free energy methods. The quantum correction to the free energy of water is roughly 10%... 

Klimov, V., Sekatskii, S. K. and Dietler, G. (2004). Coherent fluorescence resonance energy transfer between two dipoles Full quantum electrodynamics approach. J. Mod. Opt. 51, 1919 -7. 

It may be shown [8] that both semiclassical [83,84], and full quantum mechanical approaches [7,32,33,58,87] of anharmonic coupling have in common the assumption that the angular frequency of the fast mode depends linearly on the slow mode coordinate and thus may be written... 

In the full quantum mechanical approach [8], one uses Eq. (22) and considers both the slow and fast mode obeying quantum mechanics. Then, one obtains within the adiabatic approximation the starting equations involving effective Hamiltonians characterizing the slow mode that are at the basis of all principal quantum approaches of the spectral density of weak H bonds [7,24,25,32,33,58, 61,87,91]. It has been shown recently [57] that, for weak H bonds and within direct damping, the theoretical lineshape avoiding the adiabatic approximation, obtained directly from Hamiltonian (22), is the same as that obtained from the RR spectral density (involving adiabatic approximation). 

---