Friedel-Crafts acylation catalysts

In the Mukaiyama aldol additions of trimethyl-(l-phenyl-propenyloxy)-silane to give benzaldehyde and cinnamaldehyde catalyzed by 7 mol% supported scandium catalyst, a 1 1 mixture of diastereomers was obtained. Again, the dendritic catalyst could be recycled easily without any loss in performance. The scandium cross-linked dendritic material appeared to be an efficient catalyst for the Diels-Alder reaction between methyl vinyl ketone and cyclopentadiene. The Diels-Alder adduct was formed in dichloromethane at 0°C in 79% yield with an endo/exo ratio of 85 15. The material was also used as a Friedel-Crafts acylation catalyst (contain-ing7mol% scandium) for the formation of / -methoxyacetophenone (in a 73% yield) from anisole, acetic acid anhydride, and lithium perchlorate at 50°C in nitromethane. 

Quaschning, V., Deutsch, J., Druska, P, Niclas, H.-J., and Kemnitz, E. 1998. Properties of modified zirconia used as Friedel-Crafts acylation catalysts. /. Catal. 177 164-174. 

Scheme S.2-27 Metal triflimides as Friedel-Crafts acylation catalysts [47, 71 ].

Type of reaction C-C bond formation Reaction conditions Solvent-free, room temperature Synthetic strategy Solid-supported Friedel-Crafts acylation Catalyst Zinc oxide (ZnO) powder... 

Aluminum chloride, 60, 61 Diels-Alder catalyst, 144 Friedel-Crafts acylation catalyst, 91-100 MA complex, 212 Aluminum, diethyl chloride, 345 Aluminum oxide, dehydrating catalyst, 87 Aluminum phenoxides, MA polymerization reactant, 273... 

Friedel-Crafts acylation catalyst, 95, 96 MA polymerization catalyst, 254 Stannous chloride, 460 Stannous oxalate, 480 Starch, MA condensations, 516 Steroids, MA Diels-Alder synthesis, 145 Steryl methacrylate, MA copolymerization, 528 Stilbene, cis and trans, 202 MA copolymerization, 307, 373, 374, 379, 394 MA reactivity ratios, 302 Stilbene oxide, MA photochemical addition, 197, 228... 

In each case the configuration around the boron changes from trigonal planar to tetrahedral on adduct formation. Because of this ability to form additional compounds, boron trifluoride is an important catalyst and is used in many organic reactions, notably polymerisation, esterification, and Friedel-Crafts acylation and alkylations. 

Friedel-Crafts Acylation. The Friedel-Crafts acylation procedure is the most important method for preparing aromatic ketones and thein derivatives. Acetyl chloride (acetic anhydride) reacts with benzene ia the presence of aluminum chloride or acid catalysts to produce acetophenone [98-86-2], CgHgO (1-phenylethanone). Benzene can also be condensed with dicarboxyHc acid anhydrides to yield benzoyl derivatives of carboxyHc acids. These benzoyl derivatives are often used for constmcting polycycHc molecules (Haworth reaction). For example, benzene reacts with succinic anhydride ia the presence of aluminum chloride to produce P-benzoylpropionic acid [2051-95-8] which is converted iato a-tetralone [529-34-0] (30). 

Friedel-Crafts acylation usually involves the reaction of an acyl halide, a Lewis acid catalyst, and the aromatic substrate. Several species may function as the active electrophile, depending on the reactivity of the aromatic compound. For activated aromatics, the electrophile can be a discrete positively charged acylium ion or the complex formed... 

Although the Lewis acids used as co-reagents in Friedel-Crafts acylations are often referred to as catalysts, they are, in fact, consumed in the reaction, with the generation of strong acids. There has been considerable interest in finding materials which could function as true catalysts. Considerable success has been achieved using lanthanide triflates. ... 

The most important method for the synthesis of aromatic ketones 3 is the Friedel-Crafts acylation. An aromatic substrate 1 is treated with an acyl chloride 2 in the presence of a Lewis-acid catalyst, to yield an acylated aromatic compound. Closely related reactions are methods for the formylation, as well as an alkylation procedure for aromatic compounds, which is also named after Friedel and Crafts. 

The preparation of a formyl-substituted aromatic derivative 3 from an aromatic substrate 1 by reaction with hydrogen cyanide and gaseous hydrogen chloride in the presence of a catalyst is called the Gattermann synthesis This reaction can be viewed as a special variant of the Friedel-Crafts acylation reaction. 

While the Friedel-Crafts acylation is a general method for the preparation of aryl ketones, and of wide scope, there is no equivalently versatile reaction for the preparation of aryl aldehydes. There are various formylation procedures known, each of limited scope. In addition to the reactions outlined above, there is the Vdsmeier reaction, the Reimer-Tiemann reaction, and the Rieche formylation reaction The latter is the reaction of aromatic compounds with 1,1-dichloromethyl ether as formylating agent in the presence of a Lewis acid catalyst. This procedure has recently gained much importance. 

As a demonstration of the complete synthesis of a pharmaceutical in an ionic liquid, Pravadoline was selected, as the synthesis combines a Friedel-Crafts reaction and a nucleophilic displacement reaction (Scheme 5.1-24) [53]. The allcylation of 2-methylindole with l-(N-morpholino)-2-chloroethane occurs readily in [BMIM][PF6] and [BMMIM][PF6] (BMMIM = l-butyl-2,3-dimethylimida2olium), in 95-99 % yields, with potassium hydroxide as the base. The Friedel-Crafts acylation step in [BMIM][PF6] at 150 °C occurs in 95 % yield and requires no catalyst. 

Friedel-Crafts acylation reactions usually involve the interaction of an aromatic compound with an acyl halide or anhydride in the presence of a catalyst, to form a carbon-carbon bond [74, 75]. As the product of an acylation reaction is less reactive than its starting material, monoacylation usually occurs. The catalyst in the reaction is not a true catalyst, as it is often (but not always) required in stoichiometric quantities. For Friedel-Crafts acylation reactions in chloroaluminate(III) ionic liquids or molten salts, the ketone product of an acylation reaction forms a strong complex with the ionic liquid, and separation of the product from the ionic liquid can be extremely difficult. The products are usually isolated by quenching the ionic liquid in water. Current research is moving towards finding genuine catalysts for this reaction, some of which are described in this section. 

The Friedel-Crafts acylation reaction has also been performed in iron(III) chloride ionic liquids, by Seddon and co-workers [96]. An example is the acetylation of benzene (Scheme 5.1-66). Ionic liquids of the type [EMIM]Cl/FeCl3 (0.50 < X(FeCl3) < 0.62) are good acylation catalysts, with the added benefit that the ketone product of the reaction can be separated from the ionic liquid by solvent extraction, provided that X(FeCl3) is in the range 0.51-0.55. 

The ability of iron(III) chloride genuinely to catalyze Friedel-Crafts acylation reactions has also been recognized by Holderich and co-workers [97]. By immobilizing the ionic liquid [BMIM]Cl/FeCl3 on a solid support, Holderich was able to acetylate mesitylene, anisole, and m-xylene with acetyl chloride in excellent yield. The performance of the iron-based ionic liquid was then compared with that of the corresponding chlorostannate(II) and chloroaluminate(III) ionic liquids. The results are given in Scheme 5.1-67 and Table 5.1-5. As can be seen, the iron catalyst gave superior results to the aluminium- or tin-based catalysts. The reactions were also carried out in the gas phase at between 200 and 300 °C. The acetylation reac-... 

Acidic chloroaluminate ionic liquids have already been described as both solvents and catalysts for reactions conventionally catalyzed by AICI3, such as catalytic Friedel-Crafts alkylation [35] or stoichiometric Friedel-Crafts acylation [36], in Section 5.1. In a very similar manner, Lewis-acidic transition metal complexes can form complex anions by reaction with organic halide salts. Seddon and co-workers, for example, patented a Friedel-Crafts acylation process based on an acidic chloro-ferrate ionic liquid catalyst [37]. 

I Aryl ketones are prepared by Friedel-Crafts acylation of an aromatic ring with an acid chloride in the presence of AICI3 catalyst (Section 16.3). 

Polyphosphoric acid is a commonly used catalyst for this reaction however, in some cases a mixture of hydrogen bromide/acetic acid gives better results. Acylation of the S-phenyl-, V-(4-tolyl)- or S-(l-naphthyl)-substituted thiobenzenepyruvic acids 3a-c affords the corresponding dibenzo[A,/]thiepins in satisfactory yields, while reaction of the S-(4-methoxyphenyl) or S-(2-naphthyl) derivatives fails to provide any thiepin.60 The intramolecular Friedel-Crafts acylation of 2-(arylsulfanyl)benzeneacetic acids also yields the corrresponding dibenzothiepins in this case the use of hydrogen fluoride sometimes results in purer products.38 The applicability of this method is restricted to the synthesis of stable bisannulated thiepins. 

Diaryl sulfones can be formed by treatment of aromatic compounds with aryl sulfonyl chlorides and a Friedel-Crafts catalyst. This reaction is analogous to Friedel-Crafts acylation with carboxylic acid halides (11-14). In a better procedure, the aromatic compound is treated with an aryl sulfonic acid and P2O5 in polypho-sphoric acid. Still another method uses an arylsulfonic trifluoromethanesulfonic anhydride (ArS020S02CF3) (generated in situ from ArS02Br and CF3S03Ag) without a catalyst. ... 

Although the regioselectivity of Friedel-Crafts acylations upon 1-phenylsulfonylpyrrole is ostensibly determined by the "hard-soft" nature of the catalyst <83JOC3214>, this paradigm may not be the controlling principle in determining the regioselectivity of acylations... 

Friedel-Crafts acylation generally involves reaction of an acyl halide and Lewis acid such as A1C13, SbF5, or BF3. Bismuth(III) triflate is also a very active acylation catalyst.46 Acid anhydrides can also be used in some cases. For example, a combination... 

Bismuth tra-tri lluoromcthancsulfonate, Bi(OTf)3, and BiCh were found to be effective catalysts for the Friedel-Crafts acylation of both activated and deactivated benzene derivatives such as fluorobenzene.19 Ga(III) triflate is also effective for Friedel-Crafts alkylation and acylation in alcohols and can tolerate water.20 This catalyst is water-stable... 

---