Fracture toughness of metals

ASTM E399-90, "Plane Strain Fracture Toughness of Metallic Materials," MnnualBook ofMSTM Standards, ASTM PubHcations, Philadelphia, 1993. [Pg.549]

Plane Strain Fracture Toughness of Metallic Materials, 1982 Annual Book of ASTM Standards, Part 10, Standard No. E399. [Pg.533]

ASTM-E 399-81 Standard test method Plane-strain fracture toughness of metallic materials... [Pg.356]

ASTM E399 Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials , 1999 Annual Book of ASTM Standard Volume 3.01 Metals-Mechanical Testing Elevated and Low-Temperature Tests Metallography, American Society for Testing and Materials, 1999. [Pg.234]

E399, Standard Test Method for Plane-strain Fracture Toughness of Metallic Materials, ASTM, West Conshohoken, PA, 1997. [Pg.174]

Applying fracture mechanics techniques to characterize brittle materials has become an important subfield of materials science, and a reasonable understanding of the relation between toughness, composition, and microstructure is available. Silicate glasses have toughness values of 0.7-1,0 MPam, alumina ceramics values of 4-5 MPam, and glass ceramics values of 1-4 MPam, (the fracture toughness of metals is often > 50 MPam "),... [Pg.260]

G. Baran, M. Degrange, C. Roques-Carmes and D. Wehbi, Fracture Toughness of Metal Reinforced Glass Composites, J. Mat. Sci. 25,4211-4215 (1990). [Pg.504]

F.L. Hedberg and F.E. Arnold "Plane Strain Fracture Toughness of Metallic MaterialSr ASTME399-78ar 1978. [Pg.532]

Proposed Method of Test for Plane Strain Fracture Toughness of Metallic Materials, ASTM Standards on Physical and Mechanical Testing of Metals Nondestructive Test. Part 31, ASTM International, West Conshohocken, PA, May 1969, pp. 1099-1114. [Pg.584]

Category 2 tests are fracture mechanics tests that use notched and precracked specimens that are statically or dynamically loaded, such as cantilever beam, compact tension, and double cantilever beam specimens, and are conducted per ASTM E 399, Test Method for Plane-Strain Fracture Toughness of Metallic Materials. [Pg.606]

BS 7448-2 1997 Fracture Mechanics Toughness Tests. Method for Determination of Kic, Critical CTOD and Critical 1 Values of Welds in MetalUc Materials BS 7448-3 1997 Fracture Mechanics Toughness Tests. Method for Determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m s" ... [Pg.17]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...