Flushing effect

Murkies, A.L., Lombard, C., Strauss, B.J.G., Wilkox, G., Burger, H.G. and Morton, M.S. (1995). Dietary flower supplementation decreases post-menopausal hot flushes effect of soy and wheat, Maturitas, 21, 189-195. 

Fuchs, M.fc.A. (J988). Flushing effects of pyre thrum and pyrelhroid insecticides against ihc German cockroach (Biattellti germatiicn I,.). Pyreth. Past 17, 3-7. 

Fuchs. M.E.A. (1988). Flushing effects of pyrethrum and pyrelhroid insecticities against the German cockroach [Htolieila germunica L.). Pyreih. Post 17, 3-7. 

Supply air diffusers of the high induction type (e.g. those typically used for office-type air-conditioning) should where possible not be used in clean areas where dust is liberated. Air diffusers should be of the non-induction type, introducing air with the least amount of induction so as to maximize the flushing effect (see Figs 9-11 for illustrations of the three types of diffuser.)... 

Whenever possible, air should be exhausted from a low level in rooms to help provide a flushing effect. 

Typically, in a room operating with turbulent airflow, the air should be introduced from ceiling diffusers and extracted from the room at low level to help give a flushing effect in the room. 

The conservation and flushing effects observed in vitamin B6 metabolism can be simulated by binding relationships. 

First, the temperature of the activated carbon is increased to approx. 100°C. This temperature increase reduces the equilibrium load of the activated carbon. Further reduction of the residual load is obtained by the flushing effect of the steam and the declining toluene partial pressure. The load difference between spent and regenerated activated carbon - the working capacity - is then available for the next adsorption cycle. 

The liquid is effectively a superconductor of heat, so it is extremely difticult to create a temperature gradient. If a heater is switched on in the liquid, it converts superfluid component to normal fluid, which flows away while more superfluid moves through it towards the heater— an extremely efiicient heat-removal process. This superfluid heat flush effect carries all suspended impurities away from the heater, because they are part of the normal fluid, and it can therefore be used as the basis of a technique for isotopic purification. 

R denotes the copper runoff rate (g m" year i) through two contributions, both with a physical meaning. The first contribution originates from dry periods between rain events (the first-flush effect) and the second from the rain events. Input parameters are the SO2 concentration (pg m ), pH and amount of precipitation (mm year ), and surface angle of... 

---