Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Fluorescence Converters

Fluorescent converter Utilizes stimulated emission of visible radiation in some fluorescent materials previously excited by ultraviolet radiation... [Pg.10]

For the parallel recording of EEL spectra in STEM, linear arrays of semiconductor detectors are used. Such detectors convert the incident electrons mto photons, using additional fluorescent coatings or scintillators in the very same way as the TEM detectors described above. [Pg.1633]

Peroxyoxalate. The chemical activation of a fluorescer by the reactions of hydrogen peroxide, a catalyst, and an oxalate ester has been the object of several mechanism studies. It was first proposed in 1967 that peroxyoxalate (26) was converted to dioxetanedione (27), a highly unstable intermediate which served as the chemical activator of the fluorescer (fir) (6,9). [Pg.266]

A modified oxalic ester reaction that is activated by air rather than hydrogen peroxide has been provided by combining a 9,10-dihydroxyanthracene or ben2oin with the ester and fluorescer (259). Oxygen from air is converted to hydrogen peroxide by the dihydroxyanthracene. [Pg.274]

Scintillation detectors are substances which fluoresce when stmck by x-radiation. Scintillation can, therefore, serve to convert x-ray photons into visible or ultraviolet light. Scintillation materials include thaUium-activatedcrystals of sodium iodide, NaI(Tl), potassium iodide, KI(T1), or cesium iodide, CsI(Tl) crystals of stilbene (a, P-diphenylethylene) [588-59-0] and anthracene [120-12-7] bismuth germanium oxide [12233-56-6] ... [Pg.50]

The yellow form (11) on acidification is converted to the more stable thiol form (12). On oxidation, typically with alkaline ferhcyanide, yellow form (11) is irreversibly converted to thiochrome [299-35-4] (14), a yellow crystalline compound found naturally in yeast but with no thiamine activity. In solution, thiochrome exhibits an intense blue fluorescence, a property used for the quantitative determination of thiamine. [Pg.86]

X-ray fluoroscopy is used for direct on-line examination. A fluorescent screen is used to convert x-ray photons into visible light photons. A television camera receives the visible image and displays it on a television screen (see Fig. 19). This type of system is used for security screening of carry-on luggage at airports. [Pg.382]

Since the avermectins exhibit unprecedented potency, they are used at unusually low doses of 6 —300 )-lg/kg, which makes the detection and isolation of residues and metaboUtes from animal tissue a new challenge. For this reason a sensitive analytical assay requires a derivative suitable for detection at concentrations down to 1/10 or 1/100 of one ppm. Ivermectin and avermectin B are therefore converted into an aromatic derivative which allows detection by fluorescence absorbance. To achieve this derivatization, avermectin B, ivermectin, or their derivatives are heated with acetic anhydride in pyridine at 100°C for 24 h (30). The reaction time can be reduced to 1 h by using /V-methylimidazole as a catalyst (31). The resultant... [Pg.282]

Donor and acceptor levels are the active centers in most phosphors, as in zinc sulfide [1314-98-3] ZnS, containing an activator such as Cu and various co-activators. Phosphors are coated onto the inside of fluorescent lamps to convert the intense ultraviolet and blue from the mercury emissions into lower energy light to provide a color balance closer to daylight as in Figure 11. Phosphors can also be stimulated directly by electricity as in the Destriau effect in electroluminescent panels and by an electron beam as in the cathodoluminescence used in television and cathode ray display tubes and in (usually blue) vacuum-fluorescence alphanumeric displays. [Pg.421]

TRS Converter To measure hydrogen sulfide and reduced-organic sulfur compounds, the technique used is thermal oxidation, in which sulfur dioxide is produced. Hydrogen sulfide and other reduced-sulfur compounds are measured by using methods applicable to the measurement of sulfur dioxide concentrations. One method is a technique based on ultraviolet fluorescence. [Pg.1300]

Acids can also be converted to fluorescent dansyl derivatives The reaction of Cg to C24 fatty acids with dansyl semipiperazide or semicadavende provides an excellent example (Fig 34) [87] Odd-numbered and unsaturated fatty acids [88] and propionic, sorbic and benzoic acid [89] can be detected in the same manner... [Pg.73]


See other pages where Fluorescence Converters is mentioned: [Pg.240]    [Pg.553]    [Pg.201]    [Pg.169]    [Pg.169]    [Pg.401]    [Pg.454]    [Pg.455]    [Pg.64]    [Pg.240]    [Pg.553]    [Pg.201]    [Pg.169]    [Pg.169]    [Pg.401]    [Pg.454]    [Pg.455]    [Pg.64]    [Pg.61]    [Pg.492]    [Pg.1124]    [Pg.1143]    [Pg.1200]    [Pg.1379]    [Pg.118]    [Pg.133]    [Pg.404]    [Pg.114]    [Pg.114]    [Pg.15]    [Pg.284]    [Pg.287]    [Pg.292]    [Pg.298]    [Pg.300]    [Pg.335]    [Pg.394]    [Pg.85]    [Pg.67]    [Pg.468]    [Pg.371]    [Pg.371]    [Pg.239]    [Pg.75]    [Pg.132]    [Pg.271]    [Pg.58]   


SEARCH



Converters, fluorescent

Fluorescence color converter

© 2024 chempedia.info