Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Flowsheet simulation commercial packages

Basically, DESIGNER can use different physical property packages that are easy to interchange with commercial flowsheet simulators. For the case considered, the vapor-liquid equilibrium description is based on the UNIQUAC model. The liquid-phase binary diffusivities are determined using the method of Tyn and Calus (see Ref. 72) for the diluted mixtures, corrected by the Vignes equation (57), to account for finite concentrations. The vapor-phase diffusion coefficients are assumed constant. The reaction kinetics parameters taken from Ref. 202 are implemented directly in the DESIGNER code. [Pg.386]

Pure component physical property data for the five species in our simulation of the HDA process were obtained from Chemical Engineering (1975) (liquid densities, heat capacities, vapor pressures, etc.). Vapor-liquid equilibrium behavior was assumed to be ideal. Much of the flowsheet and equipment design information was extracted from Douglas (1988). We have also determined certain design and control variables (e.g., column feed locations, temperature control trays, overhead receiver and column base liquid holdups.) that are not specified by Douglas. Tables 10.1 to 10.4 contain data for selected process streams. These data come from our TMODS dynamic simulation and not from a commercial steady-state simulation package. The corresponding stream numbers are shown in Fig. 10.1. In our simulation, the stabilizer column is modeled as a component splitter and tank. A heater is used to raise the temperature of the liquid feed stream to the product column. Table 10.5 presents equipment data and Table 10.6 compiles the heat transfer rates within process equipment. [Pg.297]

Tables 11.5 to 11.7 contain process stream data. These data come from the TMODS dynamic simulation and not from a commercial steady-state simulation package. The corresponding stream numbers are shown on the flowsheet in Fig. 11.1. Tables 11.8 to 11.10 list the process equipment and vessel data. In the simulation, all gas is removed in a component separator prior to the distillation column. This involves the liquid from the separator and the absorber. The gas is sent back and combines with the vapor product from the separator to form the vapor feed to the absorber. Figure 11.2a shows the temperature profile in the azeotropic distillation column. Tables 11.5 to 11.7 contain process stream data. These data come from the TMODS dynamic simulation and not from a commercial steady-state simulation package. The corresponding stream numbers are shown on the flowsheet in Fig. 11.1. Tables 11.8 to 11.10 list the process equipment and vessel data. In the simulation, all gas is removed in a component separator prior to the distillation column. This involves the liquid from the separator and the absorber. The gas is sent back and combines with the vapor product from the separator to form the vapor feed to the absorber. Figure 11.2a shows the temperature profile in the azeotropic distillation column.
Example 2.1 emphasized some essential features in flowsheeting, particularly the necessity of analysing the simulation problem before entering it on computer. This chapter develops a general approach in steady state flowsheeting, in a manner that is independent of a commercial simulation package. The user should be able to use efficiently any simulator after becoming familiar with some specific technical elements. [Pg.60]


See other pages where Flowsheet simulation commercial packages is mentioned: [Pg.133]    [Pg.220]    [Pg.32]    [Pg.37]    [Pg.290]    [Pg.270]    [Pg.182]   
See also in sourсe #XX -- [ Pg.533 ]




SEARCH



Flowsheet

Flowsheet simulation

Flowsheet simulators

Flowsheeting

Flowsheets

Simulation packages

© 2024 chempedia.info