Plate and frame filter

Filter, plate and frame, c.i. filtering surface area, 1-60 0.58... 

Batch vacuum leaf Batch nutsche Batch pressure filters Plate and frame Vertical leaf Horizontal plate Cartridge edge... 

Filters Plate and frame area, m 5-50 2700 4400 0.60 cast iron... 

The capacity of these filters can frequently be increased by the installation of perforated metal or plastic sheets between the plates and septa. Either cloth or paper may be used for the latter. If paper is used, it is usually disposed of at the end of the cycle. The perforated sheets serve to keep the septum from sagging into the drainage grooves in the plate where it will reduce the capacity of the filter. Plate and frame filters are available with gasketed surfaces and mechanical leaf moving devices. 

Filters Plate-and-frame Filtering area. A, ft 130-800 ft Cp = 3,800 A Carbon steel... 

Filter, plate and frame cast iron, with frames, plates, stand excluding filter medium. FOB cost = 16000 for an effective filter area = 10 m with n = 0.55 for the range 1-150. L+M = 1.8. L/M = 0.42. Alloy factors cast iron, X 1.00 bronze, X 3.0 lead, X 2.4 rubber lined, X 2.7 PVC, X 2.0. 

Filter, plate and frame yellow pine, with frames, plates, stand excluding filter medium. FOB cost = 14 200 for an effective filter area = 10 m with n = 0.50 for the range 1-150. 

Filter, plate and frame, diaphragm cast iron or polypropylene, recessed plate, 2.5 cm chambers, all equipment for automatic operation, chemical feed system, excluding sludge pump and conveyor. FOB cost = 600000 for an effective solids handling volume within the press press volume = 3 m with n = 0.60 for the... 

---