Filaments preparation from cellulose

At low vapour pressures, the curves are concave to the pressure axis, then remain almost straight for a while and, at higher vapour pressure, become conjvex to the pressure axis. For all artificial fibres, (consisting of cellulose precipitated from a solution), including isotropic model filaments prepared from viscose, the curves are almost identical. 

Cellulose acetate has replaced cellulose nitrate in many products, for example, in safety-type photographic films. When a solution of cellulose acetate in acetone is passed through the fine holes of a spinneret and the solvent evaporates, solid filaments are produced. Acetate rayon is prepared from threads of these filaments. Some applications and solvents of commercial cellulose acetate grades are summarized in Table 9-5. 

Viscose Silk.—III. From Cellulose Xanthate. We have referred to the solvent action of xanthic acid, which is the ethyl ether of di-thio-carbonic acid, viz., HS-CS-OC2H5. When sodium cellulose is dissolved in xanthic acid the cellulose is in the form of sodium cellulose xanthate. A solution properly prepared by treating cellulose with sodimn hydroxide and carbon di-sulphide in the presence of benzene or carbon tetra-chloride, in which polymerization of the cellulose compound is effected, is decomposed by forcing capillary streams of the solution into a solution of ammonium sulphate. The cellulose is thus obtained as in the other processes in the form of fine filaments of a hydrated cellulose possessing silk-like properties. Artificial silk of this type is known as viscose silk and is made in large quantities. In 1914 about 20,000,000 pounds of artificial silk were made, of which about 3,000,000 pounds were made in the United States. Most of this product was viscose silk. 

Fig. 102. Empirical relation between orientation derived from birefringence (/o) and from X-ray photographs /(x). The different signs refer to a variety of cellulose filaments prepared in a different way and covering swelling degrees between 16 and 2.2.

A spirothietane sulfone-oxetane is a comonomer in the preparation of polyethers. A polymer obtained from this sulfone in a solution of bis(3,3-chloromethyl) oxetane with phosphorus pentafluoride can be spun to drawable filaments. Thietane sulfone spirocyclic carbonates may be polymerized via the carbonate group to high-molecular-weight solids said to be useful in laminating. Thietane 1,1-dioxide improves the dye receptivity of poly (acrylonitrile), viscose, cellulose acetate, and poly(vinyl chloride). It is also reported to be a stabilizer for nitric acid in oxidizer mixtures for rocket motors. 2-Methylthietane 1,1-dioxide is claimed to be superior to sulfolane (thiolane 1,1-dioxide) in the liquid extraction of aromatic hydrocarbons from mixtures with saturated hydrocarbons. " A number of bis(3,3-alkoxy) thietane 1,1-dioxides have been proposed as intermediates in the preparation of cyanine dyes useful as photographic sensitizers. " ... 

In Table 13 the values of the optical orientation factor f and that derived from X-ray data (cf. Sections 8 b 3, and 8 c 2, p. 623) are given for xanthate filaments (q = 13) and freshly prepared cellulose filaments (g = 7.0) at various degrees of previous stretching. (The data refer to the objects dried in air after their preparation... 

---