Field strength specific type

Field of application Pigment type Approximate particle length, pm Specific surface area, m2/g Coercive field strength 7/c, kA/m Saturation magnetization, Ms, pT m3/kg MJMS... 

Euerby et al. [9] have systematically investigated the effects of the bonded phase, mobile phase, buffer type, field strength, pH, and temperature on the resolution of specific substituted barbiturates. Critical parameters for the optimization of efficiency of basic drugs by CEC (as for HPLC) include the nature of the sample solvent, pH, and concentration of ion-pair reagents, for example. 

In the case of SAPO-11 materials, silicon was observed to incorporate the AEL framework with some difficulty, in order to induce medium strength acidity by substitution for P. It could also correspond to specific A1 environments, i.e., not all the A1 atoms are tetracoordinated, but some have six neighbors or even five. Such a concept may broaden the field of AlPO-type materials which exhibit novel topologies. 

Thousands of 2D experiments have been reported in the literature. These experiments can be categorized into a few major classes based on the type of information obtained from the spectra. The experiments within a class contain different refinements of the same basic experiment, but they provide the same type of information. Different variations are most usefiil under different circumstances. Typically, information from two or more classes of experiments is used together to obtain a complete solution to a structure. In selecting appropriate experiments, one must first consider its feasibility in terms of sensitivity. Assuming availability of an instrument with a specific field strength and no limitations imposed by the amount of sample available (not unusual, especially when dealing with commercial polymers), the feasibility of an experiment is determined by the sensitivity for the nucleus to be detected. 

---