Feature table

Product Design Feature Table 3-19 Example of the effect of rib and cross-section changes... 

Table 3 lists selected soil and groundwater models and their main features. Table 4 lists limitations and advantages of major model categories. Models listed in Table 3 are documented, operational and very representative of the various structures, features and capabilities. For example ... 

Most hydrocarbon facility process areas and high volume storage areas have standardized on a minimum supply or availability of four hours of firewater for the WCCE. The performance of risk analysis may reveal the level of fire water protection may be more or less than this requirement. Once a detailed design is completed on a facility or if a verification of existing water demands is needed, a simple tabular calculation of firewater requirements can be made. This table can be used to document spray density requirements, duration levels, code requirements and other features. Table 23 provides and example of arrangement to document such information. 

The structures in the solid state of these compounds, 12 , 13-15 and 16, have been established by X-ray crystal structure determinations. In all cases the anionic part, i.e. the [(Me3SiCH2)3Zn] anion, has comparable structural features (Table 2). The anionic part of 12 is shown as a representative example (Figure 8). 

The antidepressants share several pharmacokinetic features (Table 30-1). Most have fairly rapid oral absorption, achieve peak plasma levels within 2-3 hours, are tightly bound to plasma proteins, undergo hepatic metabolism, and are renally cleared. However, even within classes, the pharmacokinetics of individual antidepressants vary considerably. 

Hypercalcuria is undoubtedly an important feature. Table 1 gives a list of figures reported by various authors. 

EMBL Nucleotide Sequence Database. SWISS-PROT consists of core sequence data with minimal redundancy, citation and extensive annotations including protein function, post-translational modifications, domain sites, protein structural information, diseases associated with protein deficiencies and variants. SWISS-PROT and TrEMBL are available at EBI site, http //www.ebi.ac.uk/swissprot/, and ExPASy site, http //www.expasy.ch/sprot/. From the SWISS-PROT and TrEMBL page of ExPASy site, click Full text search (under Access to SWISS-PROT and TrEMBL) to open the search page (Figure 11.3). Enter the keyword string (use Boolean expression if required), check SWISS-PROT box, and click the Submit button. Select the desired entry from the returned list to view the annotated sequence data in Swiss-Prot format. An output in the fasta format can be requested. Links to BLAST, feature table, some ExPASy proteomic tools (e.g., Compute pI/Mw, ProtParam, ProfileScan, ProtScale, PeptideMass, ScanProsite), and structure (SWISS-MODEL) are provided on the page. 

Click the Press to Start Compare 3D button to open the display window showing the overlapped structures (Figure 15.9). The menu bar consists of Command (Reset, Exit), Feature table (Browse features...), Align menu (Control penal), and 3D menu (rotate, translate, zoom, switch Ca/all atoms). 

Select Feature table -> Browse features -> Structure or Sequence to analyze the superimposed structures. For example, choosing Structure (Phys)-Secondary structure illustrate secondary structural features of the superimposed structures and choosing Structure (Comp)-Difference displays the structural differences between the superimposed structures as shown in Figure 15.10. 

Unfortunately, even using this optimized procedure, we were not able to improve the conversion of primary alcohols into the corresponding aldehydes. However, close examination of the oxidation behavior of several primary aliphatic alcohols revealed intriguing features (Table VII). Whilst poor conversion of 1-decanol 23 to decanal 24 was achieved (Table VII, Entry 1), dibenzyl leucinol 25 and Boc-prolinol 27 were quantitatively transformed into the corresponding aldehydes (Table VII, Entries 2 and 3). The enhanced reactivity of 25 and 27 could be due either to an increased steric effect at the a-carbon center, to an electronic influence of the a-nitrogen substituent or to a combination of both. To test the importance of steric hindrance, the aerobic oxidation of cyclohexane methanol 29 and adamantane methanol 31 was carried out. Much to our surprise, oxidation of 29 afforded 30 in 70% conversion (Table VII, Entry 4) and transformation of 31 to 32 proceeded with 80% conversion (Table VII, Entry 5). Clearly increased substitution at the a-position favors the oxidation of primary aliphatic alcohols, although the conversions are still not optimum. 

Binary Solutions. From the 200 reported values we have selected a few to illustrate some general features. Table 7-VI quotes some K values for solutions—arranged to show the effect of different solvents, S—H groups, and two dimer arrangements. 

Furthermore, structural features (Table V) of Cd9(OC2H4OMe)18-(HOC2H4OMe)2 (Fig. 55) reveal it to be related to that of the calcium analogue (Fig. 54). although a lower coordination number is observed for cadmium(II), which is smaller than calcium(II). The molecular structure of the cadmium derivative consists of a centrosymmetric nearly planar arrangement of nine cadmium atoms with the overall structural formula being [Cd9(/i3,... 

Stemming from the small sizes and high surface-to-volume ratio of the microstructures, microflow systems composed of microfluidic devices have the following characteristic features (Table 7.2) ... 

Each entry in the databases contains keywords and descriptions, which describe the function of the piece of data. Any publication on the sequence and the authors names also form part of the entry. However, the most interesting information is in the annotated feature tables. These contain... 

---