Factors affecting use

McClellan, G. H., and T. R Hignett. 1978. Some Economic and Technical Factors Affecting Use of Phosphate Raw Materials, IN Phosphorus in the Environment Its Chemistry and Biochemistry, pp. 49-73, Ciba Foundation Symposium 57, EIsevier/Excerpta Medica/North Holland Inc., New York, NY, U.S.A. 

Lackey, H. B. (1992). Factors Affecting Use of Calcium Chloride in Concrete. Cement, Concrete Aggregates, CCAGDP 14(2), 97-100. 

As we shall see later, the limitations imposed by most solvents may prevent us from being able to utilise the very strong basic characteristics of some anions. However, at this point it is more useful to consider other factors affecting the strengths of acids. 

Galerkin method becomes unstable and useless. It can also be seen that these oscillations become more intensified as a becomes larger (note that the factor affecting the stability is the magnitude of a and oscillatory solutions will also result using large negative coefficients). 

Precision For samples and standards in which the concentration of analyte exceeds the detection limit by at least a factor of 50, the relative standard deviation for both flame and plasma emission is about 1-5%. Perhaps the most important factor affecting precision is the stability of the flame s or plasma s temperature. For example, in a 2500 K flame a temperature fluctuation of +2.5 K gives a relative standard deviation of 1% in emission intensity. Significant improvements in precision may be realized when using internal standards. 

In addition to graft copolymer attached to the mbber particle surface, the formation of styrene—acrylonitrile copolymer occluded within the mbber particle may occur. The mechanism and extent of occluded polymer formation depends on the manufacturing process. The factors affecting occlusion formation in bulk (77) and emulsion processes (78) have been described. The use of block copolymers of styrene and butadiene in bulk systems can control particle size and give rise to unusual particle morphologies (eg, coil, rod, capsule, cellular) (77). 

Odors are characterized by quaUty and intensity. Descriptive quaUties such as sour, sweet, pungent, fishy, and spicy are commonly used. Intensity is deterrnined by how much the concentration of the odoriferous substance exceeds its detection threshold (the concentration at which most people can detect an odor). Odor intensity is approximately proportional to the logarithm of the concentration. However, several factors affect the abiUty of an individual to detect an odor the sensitivity of a subject s olfactory system, the presence of other masking odors, and olfactory fatigue (ie, reduced olfactory sensitivity during continued exposure to the odorous substance). In addition, the average person s sensitivity to odor decreases with age. 

Peroxy and hydroperoxy radicals play important roles ia the knock process. A number of good reviews have discussed the details of the chemical mechanisms (16). Ignition delay (tau) has also been used for description of the chemical tendency to knock (17). The chemical factors affecting knock are... 

By way of example, tert-huty peroxyacetate [107-71-1] is more thermally stable than 3-hydroxy-1,1-dimethylbutyl peroxyneoheptanoate [110972-57-1]. Although other factors affect thermal stabiUty, the trends shown can be used to quaUtatively predict peroxyester reactivity trends. The order of activity of the R group ia peroxyesters is also observed ia other / fZ-aLkylperoxy-containing compounds. 

To predict the comfort of a material, a combination of hand evaluation, eg, using the Kawabata system, as well as deterrnination of the heat and moisture transport properties, is necessary. Often, these values are correlated with a sensory evaluation of the tactile qualities of the material by a human subject panel. A thorough discussion of the many physical and psychological factors affecting comfort is available (134,135). 

Many factors affect dry deposition, but for computational convenience air quaUty models resort to using a single quantity called the deposition velocity, designated or to prescribe the deposition rate. The deposition velocity is defined such that the flux T of species i to the ground is... 

Cost and Quality. Many factors affect catalyst support cost including which raw materials are used, the purity of the raw materials, the chemical processing steps required, the fabrication method used, the severity of calcination conditions, and the extent of the quaHty assurance procedure. In... 

Discrimination between exposed and unexposed areas in this process requires the selection of thia zolidine compounds that do not readily undergo alkaline hydrolysis in the absence of silver ions. In a study of model compounds, the rates of hydrolysis of model /V-methyl thia zolidine and A/-octadecyl thiazolidine compounds were compared (47). An alkaline hydrolysis half-life of 33 min was reported for the /V-methyl compound, a half-life of 5525 min (3.8 days) was reported for the corresponding V/-octadecyl compound. Other factors affecting the kinetics include the particular silver ligand chosen and its concentration (48). Polaroid Spectra film introduced silver-assisted thiazolidine cleavage to produce the yellow dye image (49), a system subsequentiy used in 600 Plus and Polacolor Pro 100 films. 

Sodium dodecylsulphate was selected as an anionic surfactant Factors affecting acid-induced cloud point extraction including surfactant, hydrochloric acid, PAHs, and electrolyte concentration, centrifugation have been examined. Finally, we applied the optimized acid-induced CPE system for combination of the extraction and preconcentration steps with fluorimetric determination of some representatives of PAHs. Suggested means was used for PAHs determination in tap water. 

---