Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Experimental design experiment

To make cut pile carpets, two strands of BCF yarns are twisted together and heat-set with steam using a Superba heat setting machine at 135-145 °C or at 175-195 °C when heat-set with super-heated steam in a Suessen. An experimental design experiment [94] showed the higher the heat set temperature, then the lower is the bulk of the final carpet, but there is an increase in the tip definition and walk performance. The tufted carpets are then dyed with disperse dyes at atmospheric boil [95] in a continuous or a batch process. PTT carpets showed excellent resiliency in walk test experiments, equivalent to a nylon and much better than both PET and polypropylene, had lower static charge of <3.5 kV, and were resistant to coffee, mustard, betadine, red acid dyes and other stains [96],... [Pg.388]

This experiment examines the effect of reaction time, temperature, and mole ratio of reactants on the synthetic yield of acetylferrocene by a Eriedel-Crafts acylation of ferrocene. A central composite experimental design is used to find the optimum conditions, but the experiment could be modified to use a factorial design. [Pg.700]

Such programs generally concentrate on the technical parts of designing an experiment, and provide limited guidance on the important, softer aspects of experimental design stressed in this article. Also, most computer routines do not allow one to handle various advanced concepts that arise frequently in practice, eg, spHt plot and nested situations, discussed in the books in the bibhography. In fact, some of the most successful experiments do not involve standard canned plans, but are tailored to fit the problem at hand. [Pg.523]

V. L. Anderson and R. A. McLean, Design of Experiments—A Eea/istic Approach, Marcel Dekker, New York, 1974. This book provides an extensive exposition of experimental design at a relatively elementary level. It includes most of the standard material, as well as detailed discussions of such subjects as nested and spHt-plot experiments. Restrictions on randomization receive special emphasis. [Pg.524]

D. R. Cox, P/anning of Experiments,]ohxi Wiley Sons, Inc., New York, 1958. This book provides a simple survey of the principles of experimental design and of some of the most usehil experimental schemes. It tries "as far as possible, to avoid statistical and mathematical technicalities and to concentrate on a treatment that will be intuitively acceptable to the experimental worker, for whom the book is primarily intended." As a result, the book emphasizes basic concepts rather than calculations or technical details. Chapters are devoted to such topics as "Some key assumptions," "Randomization," and "Choice of units, treatments, and observations."... [Pg.524]

C. Daniel, App/ications of Statistics to lndustria/Experimentation, ]oE Wiley Sons, Inc., New York, 1976. This book is based on the personal experiences and insights of the author, an eminent practitioner of industrial appHcations of experimental design. It provides extensive discussions and concepts, especially in the areas of factorial and fractional factorial designs. "The book should be of use to experimenters who have some knowledge of elementary statistics and to statisticians who want simple explanations, detailed examples, and a documentation of the variety of outcomes that may be encountered." Some of the unusual features are chapters on "Sequences of fractional repHcates" and "Trend-robust plans," and sections entided, "What is the answer (what is the question )," and "Conclusions and apologies."... [Pg.524]

W. J. Diamond, Practica/ Experimenta/ Designs for Engineers and Scientists, 2nd ed.. Van Nostrand Reinhold, New York, 1989. "This book is for engineers and scientists with Httie or no statistical background who want to learn to design efficient experiments and to analyze data correctiy. .. The emphasis is on practical methods, rather than on statistical theory." The discussion is quite detailed in some areas, eg, experimental designs based on Hadamard matrices, and scanty in others. [Pg.524]

W. Mendenhall, Introduction to EinearMode/s and the Design andAna/ysis of Experiments, Duxbury Press, Belmont, Calif., 1968. This book provides an introduction to basic concepts and the most popular experimental designs without going into extensive detail. In contrast to most other books, the emphasis in the development of many of the underlying models and analysis methods is on a regression, rather than an analysis-of-variance, viewpoint. [Pg.524]

When a reaction has many participants, which may be the case even of apparently simple processes like pyrolysis of ethane or synthesis of methanol, a factorial or other experimental design can be made and the data subjected to a re.spon.se. suiface analysis (Davies, Design and Analysis of Industrial Experiments, Oliver Boyd, 1954). A quadratic of this type for the variables X, Xo, and X3 is... [Pg.707]

Cropley made general recommendations to develop kinetic models for compUcated rate expressions. His approach includes first formulating a hyperbolic non-linear model in dimensionless form by linear statistical methods. This way, essential terms are identified and others are rejected, to reduce the number of unknown parameters. Only toward the end when model is reduced to the essential parts is non-linear estimation of parameters involved. His ten steps are summarized below. Their basis is a set of rate data measured in a recycle reactor using a sixteen experiment fractional factorial experimental design at two levels in five variables, with additional three repeated centerpoints. To these are added two outlier... [Pg.140]

Kelkar and McCarthy (1995) proposed another method to use the feedforward experiments to develop a kinetic model in a CSTR. An initial experimental design is augmented in a stepwise manner with additional experiments until a satisfactory model is developed. For augmenting data, experiments are selected in a way to increase the determinant of the correlation matrix. The method is demonstrated on kinetic model development for the aldol condensation of acetone over a mixed oxide catalyst. [Pg.143]

This method for vertical thermosiphon reboilers is based on semi-empirical correlations of experimental data and is stated to predict heat transfer coefficients 30 percent, which is about the same range of accuracy for most boiling coefficient data. The advantage of this method is that it has had significant design experience in the industry to support it. It is also adaptable to other types of reboilers used in the industry. See Figures 10-110 and 10-111. [Pg.182]

There is an entire discipline of Experimental Design that is devoted to the art and science of determining what should be in a training set. A detailed exploration of the Design of Experiments (DOE, or experimental design) is beyond the scope of this book. Please consult the bibliography for publications that treat this topic in more detail. [Pg.28]

The generic features of these approaches are known from experience in anionic polymerization. However, radical polymerization brings some issues and some advantages. Combinations of strategies (a-d) are also known. Following star formation and with appropriate experimental design to ensure dormant chain end functionality is retained, the arms may be chain extended to give star block copolymers (321). In other cases the dormant functionality can be retained in the core in a manner that allows synthesis of mikto-arm stars (324). [Pg.549]

Experimental design requires the analyst to identify the variables (factors) that are likely to affect the result of the analysis and to carry out experiments that allow... [Pg.188]

Experimental design A number of formal procedures whereby the effect of experimental variables on the outcome of an experiment may be assessed. These may be used to assess the optimum conditions for an experiment and to maximize the accuracy and precision obtained. [Pg.305]


See other pages where Experimental design experiment is mentioned: [Pg.49]    [Pg.449]    [Pg.49]    [Pg.449]    [Pg.1185]    [Pg.2973]    [Pg.209]    [Pg.713]    [Pg.146]    [Pg.676]    [Pg.700]    [Pg.812]    [Pg.119]    [Pg.840]    [Pg.509]    [Pg.195]    [Pg.519]    [Pg.519]    [Pg.521]    [Pg.521]    [Pg.521]    [Pg.523]    [Pg.524]    [Pg.524]    [Pg.524]    [Pg.505]    [Pg.69]    [Pg.143]    [Pg.108]    [Pg.118]    [Pg.59]    [Pg.225]    [Pg.227]    [Pg.526]    [Pg.189]    [Pg.103]   
See also in sourсe #XX -- [ Pg.63 ]




SEARCH



Designed experiments

Experiment design

Experimental design

Experimental design designs

Experiments experimentation)

© 2024 chempedia.info