Ethanol kinetics

In a batch fermentation of ethanol, kinetic data were collected as product formed. The data are shown in Table E.5.1. The data will be used to design a continuous bioreactor (CSTR) with a 1001 working volume. 

Enantioselective hydrogenation of 2,3-butanedione and 3,4-hexanedione has been studied over cinchonidine - Pt/Al203 catalyst system in the presence or absence of achiral tertiary amines (quinuclidine, DABCO) using solvents such as toluene and ethanol. Kinetic results confirmed that (i) added achiral tertiary amines increase both the reaction rate and the enantioselectivity, (ii) both substrates have a strong poisoning effect, (iii) an accurate purification of the substrates is needed to get adequate kinetic data. The observed poisoning effect is attributed to the oligomers formed from diketones. 

RuCl2(picphen)]Cl (picphen=few(picolinaldehyde)-(9-phenylenedi-imine) is made by condensation of picolinaldehyde and o-phenylenediamine) and the resulting Schiff base then treated with RuClj in ethanol. Kinetics were followed of the oxidation of secondary alcohols (benzhydrol, 1-phenylethanol and a-tetralol) to the corresponding ketones by [RuCl2(picphen)] "/NMO or Tl(OAc)3/water/30°C. The intermediacy of a Ru(V) oxo species was suggested [800]. 

Keurentjes J T F, Janssen G H R and Gorissen J J (1994), The esterification of tartaric acid with ethanol kinetics and shifting the equihbrium by means of pervaporation , Chem Eng Sci, 49,4681-4689. 

Alteration of Poly(ADP-Ribose) Metabolism By Ethanol Kinetic Mechanism Of Action... 

Rate constants and activation parameters are reported for the aquation of rra j -[Co(dmgH)2(tu)X], with X = Cl, Br, or I, in 20% ethanol. Kinetic parameters are also reported for the aquation of rrans-[Co(dmgH)2(py)Cl] in 10% ethanol here the activation energy is 27.1 kcal mol and the activation entropy is +10 cal deg mol. The precision of these values may not be very high as rate constants were determined only over a 10 °C temperature range (30- °C). 

Reduction. Acetaldehyde is readily reduced to ethanol (qv). Suitable catalysts for vapor-phase hydrogenation of acetaldehyde are supported nickel (42) and copper oxide (43). The kinetics of the hydrogenation of acetaldehyde over a commercial nickel catalyst have been studied (44). 

There are two ways to produce acetaldehyde from ethanol oxidation and dehydrogenation. Oxidation of ethanol to acetaldehyde is carried out ia the vapor phase over a silver or copper catalyst (305). Conversion is slightly over 80% per pass at reaction temperatures of 450—500°C with air as an oxidant. Chloroplatinic acid selectively cataly2es the Uquid-phase oxidation of ethanol to acetaldehyde giving yields exceeding 95%. The reaction takes place ia the absence of free oxygen at 80°C and at atmospheric pressure (306). The kinetics of the vapor and Uquid-phase oxidation of ethanol have been described ia the Uterature (307,308). 

The reaction kinetics for the dehydrogenation of ethanol are also weU documented (309—312). The vapor-phase dehydrogenation of ethanol ia the presence of a chromium-activated copper catalyst at 280—340°C produces acetaldehyde ia a yield of 89% and a conversion of 75% per pass (313). Other catalysts used iaclude neodymium oxide and samarium hydroxide (314). 

A competing reaction in any Birch reduction is reaction of the alkali metal with the proton donor. The more acidic the proton donor, the more rapid IS the rate of this side reaction. Alcohols possess the optimum degree of acidity (pKa ca. 16-19) for use in Birch reductions and react sufficiently slowly with alkali metals in ammonia so that efficient reductions are possible with them. Eastham has studied the kinetics of reaction of ethanol with lithium and sodium in ammonia and found that the reaction is initially rapid, but it slows up markedly as the concentration of alkoxide ion in the mixture... 

Hurley, M.A., Jones, A.G. and Drummond, J.N., 1995. Crystallization kinetics of cyanazine precipitated from aqueous ethanol solutions. Chemical Engineering Research and Design, 73B, 52-57. 

Similarity with cobalt is also apparent in the affinity of Rh and iH for ammonia and amines. The kinetic inertness of the ammines of Rh has led to the use of several of them in studies of the trans effect (p. 1163) in octahedral complexes, while the ammines of Ir are so stable as to withstand boiling in aqueous alkali. Stable complexes such as [M(C204)3], [M(acac)3] and [M(CN)5] are formed by all three metals. Force constants obtained from the infrared spectra of the hexacyano complexes indicate that the M--C bond strength increases in the order Co < Rh < [r. Like cobalt, rhodium too forms bridged superoxides such as the blue, paramagnetic, fCl(py)4Rh-02-Rh(py)4Cll produced by aerial oxidation of aqueous ethanolic solutions of RhCL and pyridine.In fact it seems likely that many of the species produced by oxidation of aqueous solutions of Rh and presumed to contain the metal in higher oxidation states, are actually superoxides of Rh . ... 

The importance of the solvent, in many cases an excess of the quatemizing reagent, in the formation of heterocyclic salts was recognized early. The function of dielectric constants and other more detailed influences on quatemization are dealt with in Section VI, but a consideration of the subject from a preparative standpoint is presented here. Methanol and ethanol are used frequently as solvents, and acetone,chloroform, acetonitrile, nitrobenzene, and dimethyl-formamide have been used successfully. The last two solvents were among those considered by Coleman and Fuoss in their search for a suitable solvent for kinetic experiments both solvents gave rise to side reactions when used for the reaction of pyridine with i-butyl bromide. Their observation with nitrobenzene is unexpected, and no other workers have reported difficulties. However, tetramethylene sulfone, 2,4-dimethylsulfolane, ethylene and propylene carbonates, and salicylaldehyde were satisfactory, giving relatively rapid reactions and clean products. Ethylene dichloride, used quite frequently for Friedel-Crafts reactions, would be expected to be a useful solvent but has only recently been used for quatemization reactions. ... 

Second-order kinetics are reported for the reactions of halogeno-quinoline iV -oxides with piperidine in several solvents and of halo-geno-nitrothiophenes with piperidine in ethanol. ... 

From the standpoint of geometrical considerations, the major difference is in the far greater steric requirements of the nitro group. This could result in either primary or secondary steric effects. Nevertheless, primary steric effects do not seem to be necessarily distinguishable by direct kinetic comparison. A classic example is the puzzling similarity of the activation parameters of 2-chloropyrimidine and 2,6-dinitrochlorobenzene (reaction with piperidine in ethanol), which has been described by Chapman and Rees as fortuitous. However, that nitro groups do cause (retarding) primary steric effects has been neatly shown at peri positions in the reaction with alkoxides (see Section IV,C, l,c). 

Lu et al. [86] also studied the effect of initiator concentration on the dispersion polymerization of styrene in ethanol medium by using ACPA as the initiator. They observed that there was a period at the extended monomer conversion in which the polymerization rate was independent of the initiator concentration, although it was dependent on the initiator concentration at the initial stage of polymerization. We also had a similar observation, which was obtained by changing the AIBN concentration in the dispersion polymerization of styrene conducted in isopropanol-water medium. Lu et al. [86] proposed that the polymerization rate beyond 50% conversion could be explained by the usual heterogenous polymer kinetics described by the following equation ... 

Alcohol dehydrogenase is a cytoplasmic enzyme mainly found in the liver, but also in the stomach. The enzyme accomplishes the first step of ethanol metabolism, oxidation to acetaldehyde, which is further metabolized by aldehyde dehydrogenase. Quantitatively, the oxidation of ethanol is more or less independent of the blood concentration and constant with time, i.e. it follows zero-order kinetics (pharmacokinetics). On average, a 70-kg person oxidizes about 10 ml of ethanol per hour. 

Zero-order kinetics describe the time course of disappearance of drugs from the plasma, which do not follow an exponential pattern, but are initially linear (i.e. the drug is removed at a constant rate that is independent of its concentration in the plasma). This rare time course of elimination is most often caused by saturation of the elimination processes (e.g. a metabolizing enzyme), which occurs even at low drug concentrations. Ethanol or phenytoin are examples of drugs, which are eliminated in a time-dependent manner which follows a zero-order kinetic. 

---