Ethanol hydrates

Rh was loaded by incipient wetness impregnation. SRE reaction over these catalysts revealed that ethanol hydration is favorable over acidic or basic catalysts while dehydrogenation is favorable over redox catalysts. Among the catalysts, a 2%Rh/Ceo.8Zro.202 exhibited the best performance, may be due to strong Rh-support interaction... 

A sulfuric acid process similar to the one described for ethanol hydration... 

ETHANOL HYDRATES FORMED BY GAS-CONDENSATION INVESTIGATIONS BY RAMAN SCATTERING AND X-RAY DIFFRACTION... 

Previous works reported on the study of the freezing process of aqueous solutions of ethanol in relation with the phase diagram. They were focused on the identification of different stable or metastable ethanol-hydrate structures using X-ray diffraction and differential scanning calorimetry (DSC). They also mentioned the formation of clathrate hydrates. In spite of the familiarity of alcohol-water systems and their importance in many fields of chemistry, cryobiology, astrophysics, there are still significant discrepancies in the literature with uncertainties concerning the composition and the structure of the stable or metastable eutectic or peritectic hydrates. ... 

Ethanol hydrates. It is remarkable that the Et0H-H20 ice mixture exhibits relatively soft spectral changes between spectra collected at different temperatures. This is illustrated in figure 2 which displays the temperature dependency of Vs(CH3) for pure EtOH and Et0H-H20 ice mixtures of different concentrations. The temperature and concentration dependency of Vs(CH3) can be qualitatively compared with that of v(OH) reported previously. ... 

Figure 9.11 The ethanol hydration shell from simulations with TIP4P-Ew [left] and SSDQOl [right]. Large spheres are ethanol oxygens [red] and carbons [aqua] small spheres are water ox5 gens [red] and hydrogens...

CCls CHO. A colourless oily liquid with a pungent odour b.p. 98°C. Manut actured by the action of chlorine on ethanol it is also made by the chlorination of ethanal. When allowed to stand, it changes slowly to a white solid. Addition compounds are formed with water see chloral hydrate), ammonia, sodium hydrogen sulphite, alcohols, and some amines and amides. Oxidized by nitric acid to tri-chloroethanoic acid. Decomposed by alkalis to chloroform and a methanoate a convenient method of obtaining pure CHCI3. It is used for the manufacture of DDT. It is also used as a hypnotic. 

In addition to chloroform, many other compounds containing the trichloro-methyl group, CI3C-, show marked physiological action. Thus trichloro-acetaldehyde or chloral hydrate, Cl3C CH(OH) (p. 342), and trichloro-tertiary-butanol or chloretone, CUC CfCHaliOH, are both hypnotics. Similarly, tribromo-ethanol or avertin, BraC-CHjOH, has strong anaesthetic properties. 

Dissolve 10 g. of chloro- 2,4-dinitrobenzenet in 50 ml. of dioxan in a 250 ml. conical flask. Dilute 8 ml. of hydrazine hydrate with an equal volume of water and add this slowly with shaking to the dioxan solution, keeping the temperature between zo " and 25°. Heat under reflux for 10 minutes to complete the reaction and then add 5 ml. of ethanol and heat again for 5 minutes. Cool and filter oflF the orange 2,4-dinitrophenylhydra-zine. Recrystallise the dry product from ethyl acetate m.p. 200° (decomp.). Yield, 7 g. 

Place 1 0 ml. of hydrazine hydrate (CAUTION corrosive chemical) in a test-tube fitted with a short refiux condenser. Add 10 g. of the methyl or ethyl ester dropwise (or portionwise) and heat the mixture gently under refiux for 15 minutes. Then add just enough absolute ethanol through the condenser to produce a clear solution, refiux for a further 2-3 hours, distil oflF the ethyl alcohol, and cool. Filter oflF the crystals of the acid hydrazide, and recrystallise from ethanol, dilute ethanol or from water. 

The independent preparation of potassium phthabmide (from a solution of phthalimide in absolute ethanol and potassium hydroxide in 75 per cent, ethanol) may be avoided in many cases by boiling phthalimide with the halide in the presence of anhydrous potassium carbonate. The N-substituted phthalimide (I) is frequently cleav with difficulty this is often facilitated by reaction with hydrazine hydrate to give an intermediate product, which is easily decomposed by hydrochloric acid to 3deld the insoluble hydrazide of phthaUc acid (II) and the primary amine (III) ... 

Girard s reagent P , C5H5NCH2C0NHNH2 C1. In a 1-htre threenecked flask, equipped as in the previous preparation, place 200 ml. of absolute ethyl alcohol, 63 g. (64 -5 ml.) of pure anhydrous pyridine and 98 - 5 g. (84 5 ml.) of ethyl chloroacetate. Heat the mixture under reflux for 2-3 hours until the formation of the quaternary salt is complete acidify a small test-portion with dilute sulphuric acid it should dissolve completely and no odour of ethyl chloroacetate should be apparent. Cool the mixture in ice and salt. Replace the thermometer by a dropping funnel, and add a solution of 40 g. of 100 per cent, hydrazine hydrate in 60 ml. of absolute ethanol all at once. A vigorous exothermic reaction soon develops and is accompanied by vigorous effervescence. The pro duct separates almost immediately. When cold, filter with suction, wash... 

Synthetic ethanol is derived from petroleum by hydration of ethylene In the United States some 700 million lb of synthetic ethanol is produced annually It is relatively inexpensive and useful for industrial applications To make it unfit for drinking it is denatured by adding any of a number of noxious materials exempting it from the high taxes most governments impose on ethanol used m beverages... 

Steps 1-3 Acid catalyzed nucleophilic addition of 1 mole of ethanol to the carbonyl group The details of these steps are analogous to the three steps of acid catalyzed hydration in Figure 17 7 The product of these three steps is a hemiacetal... 

The water of hydration of these complexes can be replaced with other coordinating solvents. For example, the ethanol and methanol solvates were made by dissolving the hydrates in triethyl and trimethyl orthoformate, respectively (81,82). The acetic acid solvates are made by treating the hydrates with acetic anhydride (83). Conductivity and visible spectra, where appHcable, of the Co, Ni, Zn, and Cu fluoroborates in A/A/-dimethylacetamide (L) showed that all metal ions were present as the MLg cations (84). Solvated fluoroborate complexes of, Fe +, Co +, , Cu +, and in diethyl... 

Amino-4-nitrophenol. This derivative, 2-hydroxy-5-nitroani1ine (9), forms orange prisms from water. These prisms are hydrated with one water of crystallization, mp 80—90°C, and can be dehydrated over sulfuric acid to the anhydrous form, mp 143 —145°C. The compound is soluble in ethanol, diethyl ether, acetic acid, and warm benzene and slightly soluble in water. 

The solubihty of ammonium sulfate in 100 g of water is 70.6 g at 0°C and 103.8 g at 100°C. It is insoluble in ethanol and acetone, does not form hydrates, and dehquesces at only about 80% relative humidity. The integral heat of solution of ammonium sulfate to saturation in water is 6.57 kj/mol (1.57... 

In contrast with the well-known Embden-Meyerhof-Pamass glycolysis pathway for the conversion of hexose sugars to alcohol, the steps in conversion of ethanol to acetic acid remain in some doubt. Likely, ethanol is first oxidized to acetaldehyde and water (39). For further oxidation, two alternative routes are proposed more likely, hydration of the acetaldehyde gives CH2CH(OH)2, which is oxidized to acetic acid. An alternative is the Cannizzaro-type disproportionation of two molecules of acetaldehyde to one molecule of ethanol and one molecule of acetic acid. Jicetobacter... 

Barium is a member of the aLkaline-earth group of elements in Group 2 (IIA) of the period table. Calcium [7440-70-2], Ca, strontium [7440-24-6], Sr, and barium form a closely aUied series in which the chemical and physical properties of the elements and thek compounds vary systematically with increa sing size, the ionic and electropositive nature being greatest for barium (see Calcium AND CALCIUM ALLOYS Calcium compounds Strontium and STRONTIUM compounds). As size increases, hydration tendencies of the crystalline salts increase solubiUties of sulfates, nitrates, chlorides, etc, decrease (except duorides) solubiUties of haUdes in ethanol decrease thermal stabiUties of carbonates, nitrates, and peroxides increase and the rates of reaction of the metals with hydrogen increase. 

There are two main processes for the synthesis of ethyl alcohol from ethylene. The eadiest to be developed (in 1930 by Union Carbide Corp.) was the indirect hydration process, variously called the strong sulfuric acid—ethylene process, the ethyl sulfate process, the esterification—hydrolysis process, or the sulfation—hydrolysis process. This process is stiU in use in Russia. The other synthesis process, designed to eliminate the use of sulfuric acid and which, since the early 1970s, has completely supplanted the old sulfuric acid process in the United States, is the direct hydration process. This process, the catalytic vapor-phase hydration of ethylene, is now practiced by only three U.S. companies Union Carbide Corp. (UCC), Quantum Chemical Corp., and Eastman Chemical Co. (a Division of Eastman Kodak Co.). UCC imports cmde industrial ethanol, CIE, from SADAF (the joint venture of SABIC and Pecten [Shell]) in Saudi Arabia, and refines it to industrial grade. 

Indirect Hydration (Esterification—Hydrolysis) Process. The preparation of ethanol from ethylene by the use of sulfuric acid is a three-step process (Fig. 1) ... 

Direct Hydration of Ethylene. Hydration of ethylene to ethanol via a Hquid-phase process cataly2ed by dilute sulfuric acid was first demonstrated more than a hundred years ago (82). In 1923, the passage of an ethylene-steam mixture over alumina at 300°C was found to give a small yield of acetaldehyde, and it was inferred that this was produced via ethanol (83). Since the late 1920s, several industrial concerns have expressed interest in producing ethanol synthetically from ethylene over soHd catalysts. However, not until 1947 was the first commercial plant for the manufacture of ethanol by catalytic hydration started in the United States by Shell the same process was commerciali2ed in the United Kingdom in 1951. 

---