Esters halogenated hydrocarbons

The chemical resistance of PCTFE is good but not as good as that of PTFE. Under certain circumstances substances such as chlorosulphonic acid, molten caustic alkalis and molten alkali metal will adversely affect the material. Alcohols, acids, phenols and aliphatic hydrocarbons have little effect but certain aromatic hydrocarbons, esters, halogenated hydrocarbons and ethers may cause swelling at elevated temperatures. 

Tetracosane Phenyl cyclohexane Benzophenone Methyl stearate Lindane (152.2) C24H50 (338.7) C12H16 (160.3) C13H10O (182.2) C19H38O2 (298.5) CgHgClg (290.8) Hydrocarbon Aromatic hydrocarbon Aromatic ketone Aliphatic ester Halogenated hydrocarbon Non-volatile, non-polar, solid Non-volatile, non-polar, liquid Non-volatile, polar, solid Non-volatile, polar, solid Non-volatile, medium-polar, solid Surrogate for limonene Hazardous compound, should be substituted... 

The main synthetic fluids used as special lubricants are esters, polyglycols, silicones, halogenated hydrocarbons and polyphenyl ethers. 

Typical nonsieve, polar adsorbents are siUca gel and activated alumina. Kquilihrium data have been pubUshed on many systems (11—16,46,47). The order of affinity for various chemical species is saturated hydrocarbons < aromatic hydrocarbons = halogenated hydrocarbons < ethers = esters = ketones < amines = alcohols < carboxylic acids. In general, the selectivities are parallel to those obtained by the use of selective polar solvents in hydrocarbon systems, even the magnitudes are similar. Consequendy, the commercial use of these adsorbents must compete with solvent-extraction techniques. 

The question as to whether a flame retardant operates mainly by a condensed-phase mechanism or mainly by a vapor-phase mechanism is especially comphcated in the case of the haloalkyl phosphoms esters. A number of these compounds can volatilize undecomposed or undergo some thermal degradation to release volatile halogenated hydrocarbons (37). The intact compounds or these halogenated hydrocarbons are plausible flame inhibitors. At the same time, thek phosphoms content may remain at least in part as relatively nonvolatile phosphoms acids which are plausible condensed-phase flame retardants (38). There is no evidence for the occasionally postulated formation of phosphoms haUdes. Some evidence has been presented that the endothermic vaporization and heat capacity of the intact chloroalkyl phosphates may be a main part of thek action (39,40). 

Aqueous mineral acids react with BF to yield the hydrates of BF or the hydroxyfluoroboric acids, fluoroboric acid, or boric acid. Solution in aqueous alkali gives the soluble salts of the hydroxyfluoroboric acids, fluoroboric acids, or boric acid. Boron trifluoride, slightly soluble in many organic solvents including saturated hydrocarbons (qv), halogenated hydrocarbons, and aromatic compounds, easily polymerizes unsaturated compounds such as butylenes (qv), styrene (qv), or vinyl esters, as well as easily cleaved cycHc molecules such as tetrahydrofuran (see Furan derivatives). Other molecules containing electron-donating atoms such as O, S, N, P, etc, eg, alcohols, acids, amines, phosphines, and ethers, may dissolve BF to produce soluble adducts. 

Halogenated hydrocarbons that are inexpensive sometimes are used alone or in blends with phosphate esters as fire-resistant hydrauHc fluids. Other halogenated fluids are used for oxygen-compressor lubricants, lubricants for vacuum pumps that are in contact with corrosive materials, solvent-resistant lubricants, and other lubricant appHcations where highly corrosive or reactive materials are being handled. 

PMVEMA, supphed as a white, fluffy powder, is soluble in ketones, esters, pyridine, lactams, and aldehydes, and insoluble in aUphatic, aromatic, or halogenated hydrocarbons, as well as in ethyl ether and nitroparaffins. When the copolymer dissolves in water or alcohols, the anhydride group is cleaved, forming the polymers in free acid form or the half-esters of the corresponding alcohol, respectively. Table 7 illustrates the commercially available alternating copolymers and derivatives. 

For esters, alkylbenzenes, halogenated hydrocarbons, and ketones If the hydrocarbon chain has a methyl group in an isoposition, decrease AN by 0.24 and increase AB by 8.93 for each such grouping. For ethers and amines, decrease AN by 0.50 and increase AB by 8.93 for each isogroiip. 

Solvents can be classified into three categories according to their polarity namely, polar protic, dipolar aprotic and non-polar. Most of the common solvents fall under one of following chemical classes Aliphatic hydrocarbons, aromatic hydrocarbons, alcohols, phenols, ethers, aldehydes, ketones, carboxylic acids, esters, halogen-substituted hydrocarbons, amines, nitriles, nitro-derivatives, amides and sulfur-containing solvents (Marcus, 1998). In certain cases a mixture of two or more solvents would perform better than a single solvent. 

PMMAs are attacked by strong acids, strong and concentrated bases, esters, ethers, ketones, aldehydes, aromatic and halogenated hydrocarbons, certain alcohols, oxidizing agents, and phenols. 

A mammal may emit many volatile compounds. Humans, for instance, give off hundreds of volatiles, many of them chemically identified (Ellin etal., 1974). The volatiles include many classes of compound such as acids (gerbil), ketones, lactones, sulfides (golden hamster), phenolics (beaver, elephant), acetates (mouse), terpenes (elephant), butyrate esters (tamarins), among others. The human samples mentioned before contained hydrocarbons, unsaturated hydrocarbons, alcohols, acids, ketones, aldehydes, esters, nitriles, aromatics, heterocyclics, sulfur compounds, ethers, and halogenated hydrocarbons. Sulfur compounds are found in carnivores, such as foxes, coyotes, or mustelids. The major volatile compound in urine of female coyotes, Canis latrans, is methyl 3-methylhut-3-enyl sulfide, which accounts for at least 50% of all urinary volatiles (Schultz etal, 1988). 

Xylends. (see Dimethylphenols, p. 182 XYLENOLS, below) 92 Esters, 51 Ethers, 12 Hydrocarbons, 13 Halogenated hydrocarbons (and practically all others of these classes) CST above azeotropic boiling ... 

Stanton and Jurs [3] developed a model for a more diverse set of compounds, including hydrocarbons, halogenated hydrocarbons, alkanols, ethers, ketones, and esters. The model has been evaluated with 31 compounds, using, among others, charge partial surface area (CPSA) descriptors ... 

Fat- and oil-soluble dyes are also soluble in waxes, resins, lacquers, hydrocarbons, halogenated hydrocarbons, ethers, and alcohols, but not in water. It is not possible to differentiate clearly between them and the alcohol- and ester-soluble dyes. With the exception of blue anthraquinone derivatives, fat- and oil-soluble dyes are azo dyes, generally based on simple components. According to their degree of solubility they usually contain hydroxyl and/or amino groups, but not sulfonic acid and carboxylic acid groups. Examples of fat- and oil-soluble azo dyes are C.I. 

---