Erosive wear, test methods

Madsen, B. W., Blickensderfer, R, "A New Flow-Through Slurry Erosion Wear Test," Slurry Erosion Uses, Applications and Test Methods. ASTM STP 946, J. E Miller and F.E. Schmidt Jr, Eds., ASTM, West Conshohocken, PA, 1987, pp 169-84. [Pg.404]

The evaluation of erosive wear of elastomers has not been standardized, and most industries test the erosive wear by using methods designed to simulate conditions relevant to their operations. [Pg.186]

There are a number of other erosive wear testers used in industry to suit the type of product being evaluated. All the testers must be compared to actual field results. A major problem with many of the methods is the degradation of the slurry under test. The erosive wear of polyurethanes is very good, so extended testing often needs to be carried out. [Pg.187]

A number of good sources of information exist on the topic of electrochemical and nonelectrochemical test methods for corrosion. This chapter refers to many ASTM standards, most of which are in Volume 3.02 of the ASTM Annual Book of Standards entitled Wear and Erosion Metal Corrosion . Books [7-9] and review articles [10-12] on corrosion testing provide more detail than can be given here. [Pg.697]

ASTM International has a number of standard test methods for erosion, cavitation, and fretting wear. [Pg.275]

Annual Book of ASTM Standards, Vci. 03.02, Wear and Erosion Metal Corrosion, Section 3, Metals Test Methods and Ana -cal Procedures, ASTM International, West Conshohocken, PA. 1994. [Pg.715]

Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws Standard Test Method for Cavitation Erosion Using Vibratory Apparatus Standard Terminology Relating to Wear and Erosion... [Pg.854]

Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test... [Pg.854]

The wear resistance of refractories is determined according to ASTM C-704-01 [56]. This test method measures the relative abrasion resistance of various refractory samples under standard conditions at room temperature. The abrasion resistance of a refractory material provides an indication of its suitability for service in abrasion or erosive environments. [Pg.17]

Erosive wear, slurry 0 75 Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Resistance Response of Materials (SAR Nomber) Mass loss... [Pg.82]

Erosive wear, solid particles 0 76 Test Method for Conductiiig Erosion Tests Stdid Particle Impingement Using Gas Jets Mass loss... [Pg.82]

Annual Book of ASTM Standards, Metal Test Methods and Analytical Procedures, Vol. OS. 02, Wear and Erosion, Metal Corrosion, 1990. [Pg.161]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...