Epoxide propylene oxide treatment

After epoxidation, propylene oxide, excess propylene, and propane are distilled overhead. Propane is purged from the process propylene is recycled to the epoxidation reactor. The bottoms Hquid is treated with a base, such as sodium hydroxide, to neutralize the acids. Acids in this stream cause dehydration of the 1-phenylethanol to styrene. The styrene readily polymerizes under these conditions (177—179). Neutralization, along with water washing, allows phase separation such that the salts and molybdenum catalyst remain in the aqueous phase (179). Dissolved organics in the aqueous phase ate further recovered by treatment with sulfuric acid and phase separation. The organic phase is then distilled to recover 1-phenylethanol overhead. The heavy bottoms are burned for fuel (180,181). 

However, the uncovered silica surface consisting in residual silanols could induce indesirable competitive reaction from propylene oxide treatment such as epoxide opening and alkoxylation of the surface. In order to overcome these drawbacks, the uncovered surface of the Cl-MTS 3 was previously passivate with hexamethyldisilazane treatment before the ligand 1 was anchored according to scheme 3. 

Dichlorides and e2thers are the main by-products in this reaction. Treatment with base produces propylene oxide. Specialty epoxides, eg, butylene oxide, are also produced on an industrial scale by means of HOCl generated from calcium hypochlorite and acetic acid followed by dehydrohalogenation with base. 

Monocyclohexyl phosphates and phosphonates can be cleaved by a two-step process in which the ester is treated with an epoxide such as propylene oxide to form another ester, which, upon treatment with base, releases the cyclohexyl alcohol. ... 

Among alkyl-substituted ethylene oxides known to umletrn cleavage on treatment with sodium sulfite are propylene oxide, isobutylene oxide, 1,2-epoxybutane, 1,2-epoxyoctane, and 2,3-cpow-butane.1 75 These reactions with sodium sulfite constitute the bani-, ffrail analytical method developed by Swan1875 for the estimation <[Pg.179]

Propylene oxide was found to react at each of its terminals, yielding a mixture of isomeric chlorohydrina on methanolyais of the boron containing adducts/ On the other hand, epichlorohydrin gave otilv 1,3-diohloro-2-propanol on similar treatment, indicating exclusive attack on the terminal epoxide carbon atom (Eq, 060). 

Chiral Co(III)-salen complexes can also serve as efficient catalysts for HKR of terminal epoxides. Polymer-supported chiral salen complexes 156 were prepared from chiral Co complex 154 and ethylene glycol dimethacrylate 155, as shown in Scheme 3.45. The chemical reduction of 156, followed by treatment with acetic acid under aerobic conditions, produced the catalytically active polymer 157, which was used in the HKR of propylene oxide [87]. Some other examples of polymeric salen-Co complexes have also been reported for the same reaction [88, 89]. 

---