Engineering materials magnesium

Aluminum alloys readily with copper, manganese, magnesium, silicon, and zinc Many aluminum alloys arc commercially available. See also Aluminum Alloys and Engineered Materials. 

As explained in Chap. 14, anodizing is a widely use technique to produce a protective inorganic coating of some engineering materials such as aluminum, magnesium, titanium and a few other metals and alloys by the application of an anodic potential that would be normally quite corrosive if it was not for the barrier created by the process itself. Of all metals that are routinely anodized, aluminum alloys are... 

Amira S, Lafront A-M, Dube D, Tremblay R and Ghali E (2007), Corrosion behaviour of die-cast and thixocast AXJ530 magnesium alloy in chloride medium . Advanced Engineering Materials, 9(11), 973-980. 

Danielson M J (2001), Magnesium Alloys , in Environmental Effects on Engineered Materials, Jones R H, ed. New York, NY, Marcel Dekker Inc., 253-274. 

Ferrando W A (1989), Review of corrosion and corrosion control of magnesium alloys and composites . Journal Engineering Materials, 11, 299-313. 

Song G L (2005), Recent progress in corrosion and protection of magnesium alloys . Advanced Engineering Materials, 7, 308-317 563-586. 

Song G L and Atrens A (1999), Corrosion mechanisms of magnesium Alloys , Advanced Engineering Materials, 1, 11-33. 

Song G and Atrens A (2003), Understanding magnesium corrosion . Advanced Engineering Materials, 5, 837-858. 

Winzer N, Atrens A, Song G, Ghali E, Dietzel W, Kainer K U, Hort N and Blawert C (2005), A critical review of the stress corrosion cracking (SCC) of magnesium alloys . Advanced Engineering Materials, 7(8), 659-693. 

Adeva-Ramos P, Dodd SB, Morgan P, Hehmann F, Steinmetz P, Sommer F, (2001), Autopassive wrought magnesium alloys . Advanced Engineering Materials, 3, 147-152. 

GL Song, A Atrens, Understanding magnesium corrosion mechanism a framework for improved alloy performance. Advanced Engineering Materials, 2003, 5, 837. 

G Song, A Atrens, Recent insights into the mechanism of magnesium corrosion and research suggestions. Advanced Engineering Materials, 2007, 9, 177—183. 

A Atrens, N Winzer, W Dietzel, Stress corrosion cracking of magnesium alloys. Advanced Engineering Materials, 2009, doi 10 1002/adem.200900287. 

S Bender, J Goellner, A Atrens, A study of the corrosion of AZ91 in IN NaCl and the mechanism of magnesium corrosion, Advanced Engineering Materials, 2008, 10, 583. 

A Atrens, Suggestions for research directions in magnesium corrosion arising from the Wolfsburg Conference, Advanced Engineering Materials, 2004, 6, 83-84. 

The response of magnesium alloys to temperature in terms of corrosion behaviour may also be different from the traditional engine materials. For... 

JX Jia, G Song and A Atrens, Experimental measurement and computer simulation of galvanic corrosion of magnesium coupled to steel. Advanced Engineering Materials 9 (2007) 65-74. 

Blawert, C, Dietzel, W, Ghali, E Song, G (2006), Anodizing treatments for magnesium alloys and their effect on corrosion resistance in various environments . Advanced Engineering Materials, 8, 511-533,... 

Zeng, R., Dietzel, W., Witte, F., Hort, N., Blawert, C., 2008. Progress and challenge for magnesium alloys as biomaterials. Advanced Engineering Materials 10, B3-B14. 

A new class of bioactive glasses, the calcium-magnesium sulfophosphates might be explored as a tissue engineering material. So far, good cytocompatibility and biodegradability properties were described, but further characterization is needed (Bassett etal.,2014). 

---