Endo system

Namy has recently described an alternative method for effecting Sml2-catalyzed pinacol couplings (Eq. 3.31) [54]. Using mischmetall, an inexpensive alloy of the light lanthanides ( 12/kg from Fluka), acetophenone can be reductively dimerized in 70% yield in contrast to the Endo system, no Me SiCl is necessary. Carbon-carbon bond formation is presumed to involve coupling of samarium ketyls, based on identical diastereoselectivity in the presence of catalytic and stoichiometric SmU. In the absence of Sml2, there is no reaction. 

The ICLH and another prosthesis, the St. Georg [23], can be considered as the basis of the total ankle prostheses that were developed after 1972 [24]. The St. Georg prosthesis was nonconstrained, while the ICLH was semi-constrained [25]. While the ICLH was eventually abandoned, the design of the St. Georg evolved into the Endo system, which was a semiconstrained, two-part prosthesis [24]. 

W. Regelson, Proc. Internat. Symp. Atheros Retie Endo System Scientific Memo 250, lEG No. 6 (1966)... 

The cyclization of the enediynes 110 in AcOH gives the cyclohexadiene derivative 114. The reaction starts by the insertion of the triple bond into Pd—H to give 111, followed by tandem insertion of the triple bond and two double bonds to yield the triene system 113, which is cyclized to give the cyclohexadiene system 114. Another possibility is the direct formation of 114 from 112 by endo-rype. insertion of an exo-methylene double bond[53]. The appropriately structured triyne 115 undergoes Pd-catalyzed cyclization to form an aromatic ring 116 in boiling MeCN, by repeating the intramolecular insertion three times. In this cyclization too, addition of AcOH (5 mol%) is essential to start the reaction[54]. 

Furan and maleic anhydride undergo the Diels-Alder reaction to form the tricycHc 1 1 adduct, 7-oxabicyclo [2.2.1]hept-5-ene-2,3-dicarboxyHc anhydride (4) in exceUent yield. Other strong dienophiles also add to furan (88). Although both endo and exo isomers are formed initially, the former rapidly isomerize to the latter in solution, even at room temperature. The existence of a charge-transfer complex in the system has been demonstrated (89,90). 

Nitrile ylides derived from the photolysis of 1-azirines have also been found to undergo a novel intramolecular 1,1-cycloaddition reaction (75JA3862). Irradiation of (65) gave a 1 1 mixture of azabicyclohexenes (67) and (68). On further irradiation (67) was quantitatively isomerized to (68). Photolysis of (65) in the presence of excess dimethyl acetylenedicar-boxylate resulted in the 1,3-dipolar trapping of the normal nitrile ylide. Under these conditions, the formation of azabicyclohexenes (67) and (68) was entirely suppressed. The photoreaction of the closely related methyl-substituted azirine (65b) gave azabicyclohexene (68b) as the primary photoproduct. The formation of the thermodynamically less favored endo isomer, i.e. (68b), corresponds to a complete inversion of stereochemistry about the TT-system in the cycloaddition process. 

The photochemical behavior of the isomeric 3-methyl-2-phenyl-2-allyl-l-azirine (66) system was also studied. Irradiation of (66) in cyclohexane gave a quantitative yield of azabicyclohexenes (67) and (68). Control experiments showed that (65) and (66) were not interconverted by a Cope reaction under the photolytic conditions. Photocycloaddition of (66) with an added dipolarophile afforded a different 1,3-dipolar cycloadduct from that obtained from (65). The thermodynamically less favored endo isomer (68b) was also formed as the exclusive product from the irradiation of azirine (66b). 

The c/s-fused diaziridines (31a) and (31b) are also an equilibrium system, interchanging exo and endo positions of methyl and ethyl groups. The NMR spectrum shows two methyl peaks at 0 °C, coalescing to a single sharp peak at 75 °C. The ethyl group shows the sharp characteristic quartet-triplet splitting pattern at 75 °C (74JOC3187). 

Let us focus attention on the unfavorable ring closures. Why, for example, should formation of a five-membered ring by an endo-trig process be difficult The answer is provided by a consideration of the trajectory of approach of the nucleophile." If Z is an electron-attracting conjugating group of the type necessary to activate the double bond to nucleophilic attack, the reaction would involve the LUMO of the conjugated system, a 7t ... 

This stereoelectronic requirement would lead to a large distortion of the normal geometry of a five-membered ring and introduce strain. It is this distortion and strain that disfavor the 5-endo-trig cyclization. In contrast, 5-endo-dig cychzation is feasible because the acetylenic system provides an orbital that is available for a nearly planar mode of approach. 

Another line of evidence that bridging is important in the transition state for solvolysis has to do with substituent effects for groups placed at C-4, C-5, C-6, and C-7 on the norbomyl system. The solvolysis rate is most strongly affected by C-6 substituents, and the exo isomer is more sensitive to these substituents than is the endo isomer. This implies that the transition state for solvolysis is especially sensitive to C-6 substituents, as would be ejqiected if the C(l)—C(6) bond participates in solvolysis. ... 

In general, stereochemical predictions based on the Alder rule can be made by aligning the diene and dienophile in such a way that the unsaturated substituent on the dienophile overlaps the diene n system. The stereoselectivity predicted by the Alder rule is independent of the requirement for suprafacial-suprafacial cycloaddition, since both the endo and exo transition states meet this requirement. 

By incorporating trisubstituted aromatic rings, Vogtle has prepared what he calls endo-lipophilic cryptands . Such a compound is illustrated below as 8. The synthetic approach to these systems parallels those outlined in previous discussion . 

The open face comprises a fluxional system involving the two atoms and the endo-Hi atom of the BH2 group)... 

Several titanium(IV) complexes are efficient and reliable Lewis acid catalysts and they have been applied to numerous reactions, especially in combination with the so-called TADDOL (a, a,a, a -tetraaryl-l,3-dioxolane-4,5-dimethanol) (22) ligands [53-55]. In the first study on normal electron-demand 1,3-dipolar cycloaddition reactions between nitrones and alkenes, which appeared in 1994, the catalytic reaction of a series of chiral TiCl2-TADDOLates on the reaction of nitrones 1 with al-kenoyloxazolidinones 19 was developed (Scheme 6.18) [56]. These substrates have turned out be the model system of choice for most studies on metal-catalyzed normal electron-demand 1,3-dipolar cycloaddition reactions of nitrones as it will appear from this chapter. When 10 mol% of the catalyst 23a was applied in the reaction depicted in Scheme 6.18 the reaction proceeded to give a yield of up to 94% ee after 20 h. The reaction led primarily to exo-21 and in the best case an endo/ exo ratio of 10 90 was obtained. The chiral information of the catalyst was transferred with a fair efficiency to the substrates as up to 60% ee of one of the isomers of exo3 was obtained [56]. 

Whereas there are numerous examples of the application of the products from diastereoselective 1,3-dipolar cycloaddition reaction in synthesis [7, 8], there are only very few examples on the application of the products from metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction in the synthesis of potential target molecules. The reason for this may be due to the fact that most metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction have been carried out on model systems that have not been optimized for further derivatization. One exception of this is the synthesis of a / -lactam by Kobayashi and Kawamura [84]. The isoxazoli-dine endo-21h, which was obtained in 96% ee from the Yb(OTf)3-BINOL-catalyzed... 

---