Emulsion and Floe Flotation

Some modifications to the standard froth flotation process have been developed in order to improve separation and recovery efficiency including carrier flotation. 

In carrier flotation, small-sized (several micrometres diameter) particles become attached to the surfaces of larger particles (perhaps 50 pm diameter, the carrier particles) [33]. The carrier particles attach to the air bubbles, and the combined aggregates of small desired particles, carrier particles and air bubbles float to form the froth. An example is the use of limestone particles as carriers in the flotation removal of fine iron and titanium oxide mineral impurities from kaolinite clays [33]. The use of a fatty acid collector makes the impurity oxide particles hydrophobic and then aggregate on the carrier particles. In a sense, the opposite of carrier flotation is slime coating, in which the flotation of coarse particles is decreased or prevented by coating their surfaces with fine hydrophilic particles (slimes). An example is the slime coating of fine fluorite particles onto galena particles [33]. 

Emulsion flotation is analogous to carrier flotation. Here, small-sized particles become attached to the surfaces of oil droplets (the carrier droplets). The carrier droplets attach to the air bubbles and the combined aggregates of small desired particles, carrier droplets and air bubbles float to form the froth. An example is the emulsion flotation of submicrometre-sized diamond particles with isooctane. Emulsion flotation has also been applied to the flotation of minerals that are not readily wetted by water, such as graphite, sulfur, molybdenite and coal [22]. Some oils used in emulsion flotation include mixed cresols (cresylic acid), pine oil, aliphatic alcohols, kerosene, fuel oil and gas oil [22]. A related use of a second, immiscible liquid to aid in particle separation is in agglomeration flocculation (see Section 5.6.4). 

Similarly, in floe flotation, the small-sized particles become aggregated into floes that can attach to the air bubbles. Here, polymers may be used to induce the required level of flocculation. Examples include the floe flotation of coal fines [34] or galena [35]. 

Finally, a rather unusual application of froth flotation is in the separation of damaged or poor quality fruit (see pp. 363-364 in Reference [36]). 

---