Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Elongation impact

AN, wt % Tensile strength, MPa Elongation, % Impact strength, J/m notch Heat distortion, temp., °C Solution viscosity, mPa-s (=cP)... [Pg.192]

We have used X-ray methods to compare the crystallite size of RIM specimens prepared with and without use of a polyether diamine (PEDA) additive. These results are compared with differential scanning calorimetry data on the hard domain melting behavior and dynamic-mechanical studies of the extent of phase separation. Mechanical data on flexural modulus, elongation, impact strength, and heat sag behavior have been obtained for the same specimens and have been correlated with the structural analyses. [Pg.54]

Results and Discussion. X—ray diffraction densitometer scans are presented In Figures 2 for the 18 EG and Figure 3 for the 30 EG series for RIM polyurethanes. DSC and Storage Modulus traces (El) for the same specimens are shown In Figures 4, 5 and 6, and flexural modulus, elongation, Impact strength, and heat sag data are given In Table I. [Pg.57]

PPE-MA with bis-2-hydroxy ethyl fumaramide, PA, and functionalized ethylene-a-olefin elastomer Dimension commercial blends with high elongation, impact strength, HDT, and dimensional stability Akkapeddi etal., 1988, 1992... [Pg.66]

EDPE/PA- 10 X 100 X 1 RT air X 100 Gel fraction, carbonyl formation torque, viscosity, tensile strength and modulus, elongation impact strength, SEM, DSC 11-14... [Pg.775]

Eilm RT N. e-, 30-100 Peroxide Heat shrinkage, haze, shrinkage temperature, shrinkage tension, tensile strength, elongation, impact strength 66... [Pg.778]

Numerous published reports describe how polyol or alcohol additives Improve elongation. Impact resistance, and general toughness of brittle. Inflexible UV-cured cycloaliphatic epoxy resins (16,17),... [Pg.394]

Sample Modulus Strength Elongation (%) Impact strength... [Pg.169]

Plastic WVTR, nmol/m s Oxygen, nmol/m GPa Tensile strength, psi Elongation, % Impact strength, kg/cm Tear strength, g/0.001 in... [Pg.594]

Melting point Light transmittance Heat deflection Elongation Impact resistance Weatherabihty... [Pg.141]

Nucleating agents give faster crystallization, finer crystal size, and higher percent crystallinity, hardness, modulus, strength, elongation, impact strength, heat deflection temperature, and transparency. [Pg.353]

Dynamic vulcanization of PP with either EPR or EPDM Santoprene A range of Shore hardness, toughness, elongation, impact strength Coran and Patel 1978... [Pg.78]

PEI with 35-95 wt% LCP, self-reinforced polymer compositions LCP fibers, tensile strength, modulus, elongation, impact strength, HDT Isayev and Swaminathan 1989... [Pg.119]

S. no. Sample (wt %) Tensile Strength (MPa) Tensile Modulus (MPa) % Elongation Impact strength (J/m)... [Pg.536]

Acrylonitrile, strength. Elongation, Impact strength. Heat distortion viscosity. [Pg.242]

Molecular Weight and Molecular Weight Distribution. Molecular weight and molecular weight distribution affect extrusion and orientation processes and the physical properties of the film, eg, tensile strength, elongation, impact resistance, (qv) and optics (see Molecular Weight Determination). [Pg.3152]

BS 3468 1974) loial 1 Si Ni Cr Cu Growth Scaling Strength Elongation Impact Hardness suitability... [Pg.1043]

Yield Elongation Impact Hardness strength at failure toughness HB 30... [Pg.318]

Polymer Tensile Modulus GPa (ksi) Tensile Strength MPa (ksi) Elongation % Impact Strength J/m (ft-lb/in) (notched) ... [Pg.68]

The physical dharacteristics of the waste polymer sudi as the flow behavior, tendle strenglh, ductility, elongation, impact, gloss, haze, and so forth are all different from and generally inferior to those of the virgin polymer [164,165]. [Pg.26]

These blends with LDPE are sometimes reported as incompatible [110], at other times praised for their benefits. For example, addition of 10% of LDPE more than tripled impact strength [205] and LDPE has been reported to improve ultimate tensile strength and elongation, impact strength, water resistance, and dimensional stability [108,109]. In one study, blends were compatibilized by adding a terpolymer of ethylene/vinyl alcohol/vinyl mercaptoacetate, which reduced domain size and improved mechanical properties [202]. [Pg.621]

See other pages where Elongation impact is mentioned: [Pg.233]    [Pg.473]    [Pg.1010]    [Pg.58]    [Pg.135]    [Pg.559]    [Pg.561]    [Pg.563]    [Pg.233]    [Pg.201]    [Pg.58]    [Pg.58]    [Pg.388]    [Pg.518]    [Pg.400]    [Pg.713]    [Pg.88]    [Pg.1699]    [Pg.102]    [Pg.324]    [Pg.622]    [Pg.659]    [Pg.9256]    [Pg.360]    [Pg.620]    [Pg.624]   
See also in sourсe #XX -- [ Pg.207 ]



SEARCH



© 2024 chempedia.info