Electrostatic mixing

The electrostatic mixing by the positive charge polarizes rin the same direction (Scheme 12b, cf. Scheme 8a), possibly more significantly than the overlap mixing. The n orbital is the frontier orbital. The proton attacks on C. The regioselectivity is reversed. 

Because of its small size and portabiHty, the hot-wire anemometer is ideally suited to measure gas velocities either continuously or on a troubleshooting basis in systems where excess pressure drop cannot be tolerated. Furnaces, smokestacks, electrostatic precipitators, and air ducts are typical areas of appHcation. Its fast response to velocity or temperature fluctuations in the surrounding gas makes it particularly useful in studying the turbulence characteristics and rapidity of mixing in gas streams. The constant current mode of operation has a wide frequency response and relatively lower noise level, provided a sufficiently small wire can be used. Where a more mgged wire is required, the constant temperature mode is employed because of its insensitivity to sensor heat capacity. In Hquids, hot-film sensors are employed instead of wires. The sensor consists of a thin metallic film mounted on the surface of a thermally and electrically insulated probe. 

The combined flue dust from waste heat boiler and electrostatic precipitator, including dust from the ventilation system, is collected in a bin and recirculated to the mixing and pelletizing step, where it is used as a binding reagent. 

The gaseous ammonia is passed through electrostatic precipitators for particulate removal and mixed with the cooled gas stream. The combined stream flows to the ammonia absorber where the ammonia is recovered by reaction with a dilute solution of sulfuric acid to form ammonium sulfate. Ammonium sulfate precipitates as small crystals after the solution becomes saturated and is withdrawn as a slurry. The slurry is further processed in centrifuge faciHties for recovery. Crystal size can be increased by employing one of two processes (99), either low differential controUed crystallization or mechanical size enlargement by continuous compacting and granulation. 

The (I)-(III)-samples sorption ability investigation for cationic dyes microamounts has shown that for DG the maximum rate of extraction is within 70-90 % at pH 3. The isotherm of S-type proves the physical character of solution process and a seeming ionic exchange. Maximal rate of F extraction for all samples was 40-60 % at pH 8 due to electrostatic forces. The anionic dyes have more significant affinity to surface researching Al Oj-samples comparatively with cationic. The forms of obtained soi ption isotherms atpH have mixed character of H,F-type chemosorption mechanism of fonuation of a primary monolayer with the further bilayers formation due to H-bonds and hydrophobic interactions. The different values of pH p for sorbents and dyes confirm their multifunctional character and distinctions in the acid-base properties of adsoi ption centers. 

---