Electrical double-layer structure absence

The subsequent three chapters are devoted to the electric double-layer structure at the interface between immiscible electrolytes examined by the electrocapillary curves method (Prof. Senda and coauthors) and by measurement of the electric double-layer capacity (Dr. Samec and Dr. Mare ek) as well as to the investigation of the Galvani and Volta potentials in the above-mentioned systems (Prof. Koczorowski). These chapters will be of interest to many electrochemists since the results obtained here are comparable with the thoroughly studied metal/electrolyte solution interface. An insignificant potential shift in the compact layer at the interface between immiscible electrolytes in the absence of specific ion adsorption - this is the main conclusion arrived at by the authors of Chaps. 4 and 5. Chapter 6 deals with the scale of potentials in a system of immiscible electrolytes and the thermodynamic relation between the distribution coefficients and the Volta potentials. 

Fig. 4.1 Structure of the electric double layer and electric potential distribution at (A) a metal-electrolyte solution interface, (B) a semiconductor-electrolyte solution interface and (C) an interface of two immiscible electrolyte solutions (ITIES) in the absence of specific adsorption. The region between the electrode and the outer Helmholtz plane (OHP, at the distance jc2 from the electrode) contains a layer of oriented solvent molecules while in the Verwey and Niessen model of ITIES (C) this layer is absent...

If the electrolyte components can react chemically, it often occurs that, in the absence of current flow, they are in chemical equilibrium, while their formation or consumption during the electrode process results in a chemical reaction leading to renewal of equilibrium. Electroactive substances mostly enter the charge transfer reaction when they approach the electrode to a distance roughly equal to that of the outer Helmholtz plane (Section 5.3.1). It is, however, sometimes necessary that they first be adsorbed. Similarly, adsorption of the products of the electrode reaction affects the electrode reaction and often retards it. Sometimes, the electroinactive components of the solution are also adsorbed, leading to a change in the structure of the electrical double layer which makes the approach of the electroactive substances to the electrode easier or more difficult. Electroactive substances can also be formed through surface reactions of the adsorbed substances. Crystallization processes can also play a role in processes connected with the formation of the solid phase, e.g. in the cathodic deposition of metals. 

Supporting Electrolyte The electrolyte that is added to the electrolytic solution to make it electrically conductive as well as to control the reaction conditions. The supporting electrolyte also works to eliminate the migration current that flows in its absence. It may be a salt, an acid, a base or a pH buffer, which is difficult to oxidize or to reduce. It is used in concentrations between 0.05 and 1 M, which is much higher than that of electroactive species (usually 10-5 to 10 2 M). The supporting electrolyte sometimes has a great influence on the electrode reaction, changing the potential window of the solution, the double layer structure, or react-... 

At the interface between O and W, the presence of the electrical double layers on both sides of the interface also causes the variation of y with Aq<. In the absence of the specific adsorption of ions at the interface, the Gouy-Chapman theory satisfactorily describes the double-layer structure at the interface between two immiscible electrolyte soultions [20,21]. For the diffuse part of the double layer for a z z electrolyte of concentration c in the phase W whose permittivity is e, the Gouy-Chapman theory [22,23] gives an expression... 

---