Drift Scale Test thermal responses

MEASURING THERMAL, HYDROLOGICAL, MECHANICAL, AND CHEMICAL RESPONSES IN THE YUCCA MOUNTAIN DRIFT SCALE TEST... 

Abstract As a part of the DECOVALEX 111 project—model predictions were carried out of thermomechanical (TM) rock-mass responses at the Yucca Mountain drift scale test (DST), Nevada. This paper presents model predictions of TM-induced rock displacements at the DST carried out by two independent research teams using two different approaches and two different numerical models. Displacements predicted by the two independent analyses compare reasonably well to the measured ones, both in trends and average magnitude. The analyses indicate that the rock mass behaviour is essentially elastic and that the in situ rock mass thermal expansion coefficient is well represented a temperature-dependent thermal-expansion derived from laboratory tests on intact rock. 

Dana R., Barr, D, Boyle, W., Jing, L. 2003. Measuring the thermal, hydrologic, mechanical and chemical responses of the Yucca Mountain Drift Scale Test. Geoproc Conf, Stockholm, Sweden... 

Abstract Modeling of the drift-scale heater test at the Exploratory Studies Facility at Yucca Mountain, Nevada, U.S.A. was performed. The objectives of the analysis were to investigate the (i) temperature effects on mechanical deformation surrounding the heated drift and (ii) thermal-mechanical effects on rock-mass permeability. The continuum representation of a deformation-permeability relationship based on fracture normal stress was developed to assess rock-mass permeability variations because of temperature changes. The estimated rock-mass displacements and permeability variations as a function of heating time were compared with field measurements. The estimated trend of permeability responses using a normal stress-based deformation-permeability relationship compared reasonably to that measured. 

---