Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Diy cleaning

Gaseous. True gases such as sulfur dioxide, nitrogen oxide, ozone, carbon monoxide, etc. vapors such as gasoline, paint solvent, diy cleaning agents, etc. [Pg.2172]

Chem. Descrip. Mineral spirits CAS 64475-85-0 EINECS/ELINCS 232-453-7 Uses Solvent for paints, coatings, diy-cleaning, commercial and industrial cleaners, insecticides, lighter fluids, resins, plastics, polishes, textile coatings, minerals/mining... [Pg.740]

Cherrr. Descrp. Toluene CAS 108-88-3 EINECS/ELINCS 203-625-9 Uses Solvent for diy-cleaning, surf, coatings, automotive, chemical specialties, paint removers, chem. synthesis starting component for rubber soivs. and lacquer diluents Features Med.-evaporating used primarily in blends Properties Sp.gr. 0.871 (60 F) dens. 7.25 Ib/gal (60 F) flash pt. (CC) 41 F KB value 105 VOC 7.16 Ib/gal ShellTolu-Sol 5 [Shell]... [Pg.741]

Uses Solvent for diy-cleaning, coatings, automotive, and chemical specialties... [Pg.741]

A diy-cleaning fluid composed of carbon and chlorine was found to have the composition 14.5% carbon and 85.5% chlorine. Its known molar mass is 166 g/mol. Drawa Lewis structure to represent the compound. [Pg.246]

A Figure 18.20 This diy-cleaning apparatus employs supercritical CO2 as solvent. [Pg.725]

Supercritical fluid CO is said to have become a mainstay in extraction processes in the food industiy (decaffeination, extraction of hops) and apparel diy cleaning, where it is said to be the best, gentlest, most thorough cleaning method now available. Carbon dioxide is also said to be considered the best supercritical fluid for the dyeing process, is naturally occurring, chemically inert, physiologically compatible, relatively inexpensive and readily available. [Pg.74]

In use Cyanabond Textile Adhesives, lami-nant fabrics, and foam must be completely dried and the laminated assembly then heated to 220°F for 5-10 sec for long term diy cleaning performance, or to 260°F for 15-30 sec for long term washability. [Pg.372]

Since adhesives used in fabric bonding are subjected to washing and diy cleaning, it is evident that a balance of steam activation and wash resistance must be achieved. Resistance to hot water washing varies with the composition of the polyamide. The easier the hot melt activates with steam, the poorer the resistance to wash. Many dry cleanable garments have poor wash resistance, particularly at temperatures above 140°F. [Pg.486]

Lumulse GMT Lumulse GMT-40 emulsifier, w/o diy cleaning Dodoxynol-4 Surfonio OP-15 Teric N4 Teric N5... [Pg.2711]

See other pages where Diy cleaning is mentioned: [Pg.946]    [Pg.93]    [Pg.311]    [Pg.87]    [Pg.87]    [Pg.851]    [Pg.1005]    [Pg.375]    [Pg.885]    [Pg.498]    [Pg.498]    [Pg.378]    [Pg.9]    [Pg.586]    [Pg.202]    [Pg.2574]    [Pg.2586]    [Pg.2612]    [Pg.2684]    [Pg.374]   
See also in sourсe #XX -- [ Pg.498 ]



SEARCH



Diyness

© 2024 chempedia.info