1,3-dipolar cycloaddition isoxazolidines

Isoxazolidines sometimes undergo retro 1,3-dipolar cycloaddition to give back alkenes and nitrones (77AHC(2D207). 

The first, and so far only, metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction of nitrile oxides with alkenes was reported by Ukaji et al. [76, 77]. Upon treatment of allyl alcohol 45 with diethylzinc and (l ,J )-diisopropyltartrate, followed by the addition of diethylzinc and substituted hydroximoyl chlorides 46, the isoxazolidines 47 are formed with impressive enantioselectivities of up to 96% ee (Scheme 6.33) [76]. 

We are the first group to succeed with the highly enantioselective 1,3-dipolar cycloadditions of nitronates [75]. Thus, the reaction of 5,6-dihydro-4H-l,2-oxazine N-oxide as a cyclic nitronate to 3-acryloyl-2-oxazilidinone, at -40 °C in dichloro-methane in the presence of MS 4 A and l ,J -DBFOX/Ph-Ni(II) complexes, gave a diastereomeric mixture of perhydroisoxazolo[2,3-fe][l,2]oxazines as the ring-fused isoxazolidines in high yields. The J ,J -DBFOX/Ph aqua complex prepared from... 

The 1,3-dipolar cycloaddition reaction of nitrones with alkenes gives isoxazolidines is a fundamental reaction in organic chemistry and the available literature on this topic of organic chemistry is vast. In this reaction until three contiguous asymmetric centers can be formed in the isoxazolidine 17 as outlined for the reaction between a nitrone and an 1,2-disubstituted alkene. The relative stereochemistry at C-4 and C-5 is always controlled by the geometric relationship of the substituents on the alkene (Scheme 8.6). 

R = H, Scheme 27). On the other hand, reaction of 255a with N-methylhydrox-ylamine hydrochloride produces a mixture of two regioisomers 257 and 258 (R = Me). When the E-l(10)-unsaturated 5-oxo-5,10-secosteroid 255b was treated with hydroxylamine hydrochloride (R = H) or AT-methylhydroxylamine hydrochloride (R = Me), isoxazolidine 259 was formed regio- and stereoselec-tively in high yield via intramolecular 1,3-dipolar cycloaddition of the nitrone intermediate 256 (R = H or Me). 

The nitrone arising from reaction between (Z)-19-nor-5,10-secosteroidal ketone 260 a and M-methylhydroxylamine hydrochloride undergoes transannu-lar 1,3-dipolar cycloaddition to give isoxazolidines 261 and 262 and an aromatic derivative 263 originating from 261 (Scheme 28). Corresponding reaction of 260b produces two types of structurally different isoxazolidines 264 and 265 as well as the dienone 266. 

The key step in the synthesis of 4-354 is the retro-1,3-dipolar cycloaddition of the isoxazolidine 4-351 to give the nitronate 4-352, which underwent an intramolecular 1,3-dipolar cycloaddition. The obtained cycloadduct 4-353 can be transformed in a few steps into the desired target 4-354 (Scheme 4.78). 

The mechanism of 1,3-dipolar cycloaddition can be found in Ref. 63 and the references within. The reaction of nitrone with 1,2-disubstituted alkenes creates three contiguous asymmetric centers, in which the geometric relationship of the substituents of alkenes is retained. The synthetic utility of nitrone adducts is mainly due to their conversion into various important compounds. For instance, P-amino alcohols can be obtained from isoxazolidines by reduction with H2-Pd or Raney Ni with retention of configuration at the chiral center (Eq. 8.44). 

Alkenylboronic esters undergo regio- and stereoselective 1,3-dipolar cycloadditions with nitrones. These reactions lead to boronic ester-substituted isoxazolidines, which can be converted by oxidation with H202 to the corresponding 4-hydroxy derivatives (Eq. 8.48).69 The high selectivity could be the result of a favorable interaction between the boronic ester and the amino group. 

Asymmetric 1,3-dipolar cycloaddition of cyclic nitrones to crotonic acid derivatives bearing chiral auxiliaries in the presence of zinc iodide gives bicyclic isoxazolidines with high stereoselectivity (Eq. 8.51). The products are good precursors of (3-amino acids such as (+)sedridine.73 Many papers concerning 1,3-dipolar cycloaddition of nitrones to chiral alkenes have been reported, and they are well documented (see Ref. 63). 

Various kinds of chiral acyclic nitrones have been devised, and they have been used extensively in 1,3-dipolar cycloaddition reactions, which are documented in recent reviews.63 Typical chiral acyclic nitrones that have been used in asymmetric cycloadditions are illustrated in Scheme 8.15. Several recent applications of these chiral nitrones to organic synthesis are presented here. For example, the addition of the sodium enolate of methyl acetate to IV-benzyl nitrone derived from D-glyceraldehyde affords the 3-substituted isoxazolin-5-one with a high syn selectivity. Further elaboration leads to the preparation of the isoxazolidine nucleoside analog in enantiomerically pure form (Eq. 8.52).78... 

Catalytic enantioselective 1,3-dipolar cycloaddition between nitrones with alkenes using a novel heterochiral ytterbium(III) catalyst is reported (Eq. 8.58).91 The desired isoxazolidine derivatives are obtained in excellent yields with excellent diastereo- and enantioselectivities. 

Isoxazole (as well as isoxazoline, and isoxazolidine) analogues of C-nucleosides related to pseudouridines 25 and 27 have been regioselectively synthesized by 1,3-dipolar cycloaddition (1,3-DC) of nitrile oxides (and nitrones) derived from uracyl-5-carbaldehyde 24 and 2,4-dimethoxypyrimidine-5-carbaldehyde 26 respectively <06T1494>. 

Related to the nitrile oxide cycloadditions presented in Scheme 6.206 are 1,3-dipolar cycloaddition reactions of nitrones with alkenes leading to isoxazolidines. The group of Comes-Franchini has described cycloadditions of (Z)-a-phenyl-N-methylnitrone with allylic fluorides leading to enantiopure fluorine-containing isoxazolidines, and ultimately to amino polyols (Scheme 6.207) [374]. The reactions were carried out under solvent-free conditions in the presence of 5 mol% of either scandium(III) or indium(III) triflate. In the racemic series, an optimized 74% yield of an exo/endo mixture of cycloadducts was obtained within 15 min at 100 °C. In the case of the enantiopure allyl fluoride, a similar product distribution was achieved after 25 min at 100 °C. Reduction of the isoxazolidine cycloadducts with lithium aluminum hydride provided fluorinated enantiopure polyols of pharmaceutical interest possessing four stereocenters. 

To study asymmetric induction from the nitrone part in 1,3-dipolar cycloaddition to styrene, D-erythrose derived nitrones (479 a-c) have been used. Cycloaddition of nitrones (479 a-c) to styrene, in boiling toluene for 10 h, affords a mixture of four diastereomeric 3,5-disubstituted isoxazolidines (481 a-c-484 a-c) in high yields (82%-94%) (Scheme 2.237) (208). 

The asymmetric 1,3-dipolar cycloaddition of nitrones (515), possessing an electron-withdrawing group, to allylic alcohols was achieved by using diisopropyl (/ ,/ )-tartrate [(R,R-DIPT)] as a chiral auxiliary. The isoxazolidines (516) and... 

The reaction of 1,3-dipolar cycloaddition of enantiopure cyclic nitrones to protected allyl alcohol, is the basis of stereoselective syntheses of bicyclic N, O-iso-homonucleoside analogs (747), of isoxazolidine, to analogs of C-nucleosides related to pseudouridine (748) and to homocarbocyclic-2 -oxo-3 -azanucleosides (749) (Fig. 2.36). 

Dipolar cycloaddition reactions between three A-benzyl-C-glycosyl nitrones and methyl acrylate afforded key intermediates for the synthesis of glyco-syl pyrrolidines. It was found that furanosyl nitrones (574) and (575) reacted with methyl acrylate to give mixtures of all possible 3,5-disubstituted isoxazolidines (577) and (578). On the other hand, the reaction with pyranosyl nitrone (576) was much more selective and cycloaddition at ambient temperatures afforded only one of the possible Re-endo adducts (579a). The obtained isoxazolidines were transformed into the corresponding (V-benzyl-3-hydroxy-2-pyrrolidinones (580—582) on treatment with Zn in acetic acid (Scheme 2.264) (773). 

Recently, an example of green chemistry in the formation of a nitrone in aqueous medium, using a surfactant, was reported in 1,3-dipolar cycloadditions to ethyl acrylate (776). The control of regioselectivity in this reaction favors the formation of trans -5-substituted isoxazolidines. 

Dipolar cycloadditions of ( -phenyl-/V-methylnitrone (585) to Baylis-Hillman adducts such as ( 3-hydroxy-a-methylene esters) (608-610) proceed with complete regioselectivity in good yields to afford the corresponding diastere-omeric 3,5,5-trisubstituted isoxazolines (611-613) (Scheme 2.269). Attack by the dipole in (585) from the less sterically hindered side of dipolarophiles (608-610) affords C-3/C-5 cis isoxazolidines (611a,b-613a,b) as the major products (780). 

Also, the effectiveness of 1,3-dipolar cycloadditions to a,p-unsaturated 8-lactones D7a, D7c, D7 d (784) and D7f, (785) in controlling the configuration of the stereogenic centers around the formed isoxazolidine ring, was demonstrated in reactions with nitrones (595). 

Dipolarophiles Dll. In the 1,3-dipolar cycloadditions of electron-rich olefins, such as vinyl ethers, with nitrone (585), common palladium (II) catalysts were used (Fig. 2.45). Reactions proceeded smoothly under mild conditions and in good yield, affording isoxazolidines (646) (Scheme 2.283) (799). 

The 1,3-dipolar cycloaddition of nitrones to vinyl ethers is accelerated by Ti(IV) species. The efficiency of the catalyst depends on its complexation capacity. The use of Ti( PrO)2Cl2 favors the formation of trans cycloadducts, presumably, via an endo bidentate complex, in which the metal atom is simultaneously coordinated to the vinyl ether and to the cyclic nitrone or to the Z-isomer of the acyclic nitrones (800a). Highly diastereo- and enantioselective 1,3-dipolar cycloaddition reactions of nitrones with alkenes, catalyzed by chiral polybi-naphtyl Lewis acids, have been developed. Isoxazolidines with up to 99% ee were obtained. The chiral polymer ligand influences the stereoselectivity to the same extent as its monomeric version, but has the advantage of easy recovery and reuse (800b). 

Dipolar cycloadditions of nitrones with vinyl acetate leads to 5-acetoxy-isoxazolidines, which can be easily transformed to isoxazolidinyl nucleosides by the Vorbriieggen methodology (803). 

Cycloaddition of 3-methylenephthalide with ot./V-diphenylnitrone gave two diastereoisomers of 2,3-diphenyl-2,3-dihydrospiro 1,3-oxazole-5(47/ )l (3 H)-2-benzoluran]-3 -one (805). The 1,3-dipolar cycloaddition reaction of /V-benzyl-C-(2-furyl)nitrones with electron-rich alkenes gave preferentially trans-3,5-disubstituted isoxazolidines (endo approach). These experimental results are in good qualitative agreement with those predicted from semiempirical (AMI and PM3) and ab initio (HF/3-21G) calculations (806). 

The highly stereoselective 1,3-dipolar cycloaddition of C-phenyl-iV-glycosylnitrones (336) and (679) to dimethyl maleate D14, with the sugar moiety acting as a chiral auxiliary, has been used in enantioselective syntheses of isoxazolidines (678) and (678 ent) (Scheme 2.292) (118). 

Mukai et al.85 reported an asymmetric 1,3-dipolar cycloaddition of chromium(0)-complexed benzaldehyde derivatives. As shown in Scheme 5 52, heating chiral nitrone 171a, derived from Cr(CO)3-complexed benzaldehyde, with electron-rich olefins such as styrene (173a) or ethyl vinyl ether (173b) generates the corresponding chiral a.v-3,5-disubstitutcd isoxazolidine adduct 174 or... 

The intramolecular dipolar cycloaddition of a nitrone with an unactivated allene was also studied [76], Treatment of 5,6-heptadien-2-one with N-methylhydroxyl-amine in refluxing ethanol yielded allenyl nitrone 78, which cyclized with the terminal allenic C=C bond to give an unsaturated bicyclic isoxazolidine. On the other hand, the site selectivity decreased with an allenic ketone having a trimethylene tether. 

Nitrones also undergo 1,3-dipolar cycloadditions with alkenes to furnish the corresponding isoxazolidines in a diastereo- and enantioselective manner when the... 

Dipolar cycloadditions of nitrile oxides 216 onto 1 gave much poorer yields of cycloadducts 217 than those of nitrones 205. The cycloadditions of 216 to 1 require higher temperatures and unfavorably compete with their dimerization to furoxanes. However, stable nitrile oxides 216 with bulky substituents R that hamper dimerization, can be used. The thermal rearrangements of 5-spirocyclopropane-annelated isoxazolines 217 always required higher temperatures than the isoxazolidine counterparts. Under these conditions the second cyclopropane ring was also cleaved to give furopyridines 218 (Scheme 48) [136, 137]. 

Elsewhere, Heaney et al. (313-315) found that alkenyloximes (e.g., 285), may react in a number of ways including formation of cyclic nitrones by the 1,3-APT reaction (Scheme 1.60). The benzodiazepinone nitrones (286) formed by the intramolecular 1,3-APT will undergo an intermolecular dipolar cycloaddition reaction with an external dipolarophile to afford five,seven,six-membered tricyclic adducts (287). Alternatively, the oximes may equilibrate to the corresponding N—H nitrones (288) and undergo intramolecular cycloaddition with the alkenyl function to afford five,six,six-membered tricyclic isoxazolidine adducts (289, R = H see also Section 1.11.2). In the presence of an electron-deficient alkene such as methyl vinyl ketone, the nitrogen of oxime 285 may be alkylated via the acyclic version of the 1,3-APT reaction and thus afford the N-alkylated nitrone 290 and the corresponding adduct 291. In more recent work, they prepared the related pyrimidodiazepine N-oxides by oxime-alkene cyclization for subsequent cycloaddition reactions (316). Related nitrones have been prepared by a number of workers by the more familiar route of condensation with alkylhydroxylamines (Scheme 1.67, Section 1.11.3). 

While many researchers have used the 1,3-APT process to generate cyclic nitrones, it is clear that the operating reaction pathway in the oxime to isoxazolidine conversion may not always be predicted. In the work of Aurich and co-workers (317,318), the polycyclic isoxazohdine 292 was isolated as the major product from thermolysis of oxime 293 and may have been formed via two separate reaction paths (Scheme 1.61). In the proven route, initial 1,3-APT of 293 formed a 1,4-oxazine nitrone (294), which acted as the acceptor for the second 1,3-APT with the remaining oxime function. The cyclic nitrone 295 so formed underwent a 1,3-dipolar cycloaddition with the allyl ether forming the isolated polycyclic isoxazolidine adduct 292. 

---