Dioxolane methanols

The oxidation of terminal alkenes with an EWG in alcohols or ethylene glycol affords acetals of aldehydes chemoselectively. Acrylonitrile is converted into l,3-dioxolan-2-ylacetonitrile (69) in ethylene glycol and to 3,3-dimetho.xy-propionitrile (70) in methanol[28j. 3,3-Dimethoxypropionitrile (70) is produced commercially in MeOH from acrylonitrile by use of methyl nitrite (71) as a unique leoxidant of Pd(0). Methyl nitrite (71) is regenerated by the oxidation of NO with oxygen in MeOH. Methyl nitrite is a gas, which can be separated easily from water formed in the oxidation[3]. 

The kinetics of formation and hydrolysis of /-C H OCl have been investigated (262). The chemistry of alkyl hypochlorites, /-C H OCl in particular, has been extensively explored (247). /-Butyl hypochlorite reacts with a variety of olefins via a photoinduced radical chain process to give good yields of aUyflc chlorides (263). Steroid alcohols can be oxidized and chlorinated with /-C H OCl to give good yields of ketosteroids and chlorosteroids (264) (see Steroids). /-Butyl hypochlorite is a more satisfactory reagent than HOCl for /V-chlorination of amines (265). Sulfides are oxidized in excellent yields to sulfoxides without concomitant formation of sulfones (266). 2-Amino-1, 4-quinones are rapidly chlorinated at room temperature chlorination occurs specifically at the position adjacent to the amino group (267). Anhydropenicillin is converted almost quantitatively to its 6-methoxy derivative by /-C H OCl in methanol (268). Reaction of unsaturated hydroperoxides with /-C H OCl provides monocyclic and bicycHc chloroalkyl 1,2-dioxolanes. 

CF,C02)2lPh, H2O, CH3CN, 85-99% yield. In the presence of ethylene glycol the dithiane can be converted to a dioxolane (91% yield) or in the presence of methanol to the dimethyl acetal. The reaction conditions are not compatible with primary amides. Thioesters are not affected. A phenylthio ester is stable to these conditions, but amides are not. The hypervalent iodine derivative l-(t-butylperoxy)-l,2-benziodoxol-3(l/f)-one similarly cleaves thioketals."... 

CCifiH]yBrN203 112888-39-8) see Raltitrexed 2-(bromomethyl)-l,3-dioxolane-4-methanol... 

The low-temperature method has been applied to some primary and secondary alcohols (Fig. 1) For example, solketal, 2,2-dimethyl-1,3-dioxolane-4-methanol (3) had been known to show low enantioselectivity in the lipase-catalyzed resolution (lipase AK, Pseudomonas fluorescens, E = 16 at 23°C, 27 at 0oc) 2ia however, the E value was successfully raised up to 55 by lowering the temperature to —40°C (Table 1). Further lowering the temperature rather decreased the E value and the rate was markedly retarded. Interestingly, the loss of the enantioselectivity below —40°C is not caused by the irreversible structural damage of lipase because the lipase once cooled below —40°C could be reused by allowing it to warm higher than -40°C, showing that the lipase does not lose conformational flexibility at such low temperatures. 

Mejorado investigated the asymmetric addition of various organometallic nucleophiles using method A, but the reaction could not be catalyzed. The intermediates proved to be far too reactive. However, he established that the addition of a stoichiometric amount of a preformed chiral complex [an admixture of Taddol (r/om-a, -(dimethyl-1,3-dioxolane-4,5-diyl)bis(diphenyl methanol)) and EtMgBr] to 5 affords some enantiomeric excess in the resulting phenol product 6 (Fig. 4.12).13... 

Accordingly, the cyclopropenylidene anthrones 190/198 were converted by ferric chloride in hydroxylic solvents to the allene ketal 466, whose hydrolysis gives the allenic ketone 46 7288. The dioxolane 468 was obtained from the alkyl-substituted quinocyclopropene 190 in glycol and the ketone 467 in methanol. Apparently FeCl3 served not only as an oxidant, but also as a Lewis acid assisting solvent addition to C1 2 of the triafulvene. 

Trimethyl-l,3-dioxolane-2-one (0.17 g), potassium carbonate (0.27 g) and methanol (10 mL) were placed in 50 mL round bottomed flask equipped with a magnetic stirrer bar and a reflux condenser. The mixture was then stirred at 60 °C for 2.5 hours. 

Irreversible Transesterification. A new preparation of chiral glycerol acetonide (2,2-dimethyl-l,3-dioxolane-4-methanol) involving an enantioselective hydrolysis of 2-0-benzylycerol diacetate to the (R)-monoacetate catalyzed by a lipoprotein lipase (47) has recently been developed. In an effort to prepare the (S)-enantiomer, we have used the aforementioned irreversible transesterification reaction using isopropenyl acetate as an acylating reagent, which upon reaction gives acetone as a... 

Bromohydroperoxides 299 that are readily available from the corresponding cyclopropanes 298 cychze in good yield into 1,2-dioxolanes 300 on treatment with silver(I) oxide (Scheme 72). Ozonolysis of unsaturated iodide 301 in methanol gives... 

Aluminum foil, Iodine powder. Carbon disulfide, 1,4,6,9-Tetrabromodiamantane, Sodium bisulfite. Hydrochloric acid. Methanol, Acetonitrile, Acetone, Sodium hydroxide. Magnesium sulfate. Potassium permanganate. Toluene Methylene chloride, 2-Bromomethanol, Trioxane, Aluminum chloride. Magnesium sulfate, Nitroform, Acetone, Sodium bicarbonate. Hexane, Silver nitrate. Acetonitrile 1,2-Dichloroethane, HexamethyldisUane, Iodine, Cyclohexane, 1,3-Dioxolane, Nitroform, Methylene chloride, Dimethylformamide, Sodium sulfate. Hydrochloric acid. Magnesium sulfate. Nitric acid. Sulfuric acid Sulfuryl chloride. Acetic anhydride. Nitric acid. Sodium bicarbonate. Sodium sulfate Nitric acid. Sulfuric acid, Malonamide Nitric acid. Sulfuric acid, Cyanoacetic acid Sulfuric acid, Acetasalicyclic acid. Potassium nitrate Nitroform, Diethyl ether, 1-Bromo-l-nitroethane, Sodium sulfuate... 

Phenylacetaldehyde glycerine acetal [29895-73-6], 2-benzyl-l,3-dioxolan-4-methanol... 

The possible intermediacy of formaldehyde in CO hydrogenation has been addressed above with regard to the cobalt catalytic system. Fahey has observed a small amount of 1,3-dioxolane (the ethylene glycol acetal of formaldehyde) as a product of the rhodium system (43). Thus, there is evidence that formaldehyde or a complexed form of this molecule could be an intermediate in the CO reduction process by this system. Rhodium catalysts are indeed found to be useful for the hydroformylation of formaldehyde to glycolaldehyde (159-161) methanol is a by-product in these reactions. 

The Hammett p-value for cleavage of the exocyclic bond of 2-methoxy-2-substituted-phenyl-l,3-dioxolans (—1.58 + 0.06) is a little larger than that for cleavage of the endocyclic C— bond of 2-hydroxy-2-substituted-phenyl-l,3-dioxolans (—1.24 + 0.04) (Table 9) (Chiang et al., 1983). A direct comparison between the p-values for C—OMe bond cleavage of trimethyl orthobenzoates and dimethyl hemiorthobenzoates is not possible at present since they have not been measured in the same solvent. However, that based on H+ for the breakdown of the hemiorthobenzoates (— 1.58) is less than that based on the equilibrium constants for their conversion into methyl benzoates and methanol which is —1.9 (derived from the equilibrium constants for formation of the hemiorthobenzoates, McClelland and Patel, 1981b). This implies that the development of positive charge in the transition state is less than in the final product, the ester. 

---