Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

3.3- Dimethyl-l -butene

Guaiacic acid [4,4 -(2,3-dimethyl-l-butene-(l,4-diyl)-bis-(2-methoxyphenol)] [500-40-3J M... [Pg.253]

Alkenes with a 1,1-disubstitution pattern form tertiary carbocations upon treatment with a Brpnsted acid. Consequently, such compounds are often easily reduced (Eq. 72). An example of this is the formation of 2-methylpentane in 93% yield after only 5 minutes when a dichloromethane solution of 2-methyl-1-pentene and 1.4 equivalents of triethylsilane is treated with 1.4 equivalents of trifluoromethanesulfonic acid at —75°.216 Similar treatment of 2,3-dimethyl-l-butene gives a 96% yield of 2,3-dimethylbutane.216... [Pg.37]

Polymerization of 2,3-dimethyl-l-butene (1-methyl-l-isopropylethyl-ene) in the presence of 80% sulfuric acid at about 0° gave a mixture of dimers indistinguishable from that obtained with tetramethylethylene (Whitmore and Meunier, 20). The yield of dimer was 43% as compared to 62% in the case of the tetramethylethylene. [Pg.44]

When generated in zeolites, alkene or arene radical cations react with the parent molecules to form ti-dimer radical cations. For example, 2,3-dimethyl-l-butene and benzene formed 91 + and 92 +, respectively. The confinement and limited diffusion of the radical cation in the zeolite favor an interaction between a radical cation and a neutral parent in the same channel. [Pg.247]

Similarly, fluorescence detected magnetic resonance effects observed during the pulse radiolysis of anthracene-dio in the presence of 2,3-dimethyl-l-butene support the presence of 8 equivalent methyl groups. Because the splitting, Odi = 0.82 mT, was approximately one-half that of the monomer splitting, Omon =1.71 mT, the sandwich dimer 91 + was invoked. ... [Pg.247]

The complex [PtCl2(DIOP)] in the presence of SnCl2 has been used as catalyst for the asymmetric hydroformylation of various alkenes. With a series of butene and styrene derivatives very low optical yields were obtained. The best results were achieved with 2,3-dimethyl-l-butene which gave 15% optically pure 3,4-dimethylpentanal, and with a-ethylstyrene which gave 15% optically pure 3-phenylpentanoic acid after oxidation of the aldehyde.373... [Pg.266]

When the enthalpies of reaction between branched ketones and the corresponding 1,1-disubstituted alkenes are calculated using the multiple enthalpies of formation available for the latter, the following ranges are obtained Me/i-Pr, 196.6 to 200.5 Et/i-Pr, 201.2 to 206.6 and Me/t-Bu, 200.5 to 205.1 kJmol-1. Perhaps it is reasonable to conclude that the reaction enthalpies for the branched compounds either will be approximately constant, as for the unbranched ketone/alkene conversions, or will be more endothermic with branching, as in the branched aldehyde/alkene conversions. In either case, the least endothermic reaction enthalpy for the Me/i-Pr conversion above seems inconsistent and therefore the enthalpies of formation for 2,3-dimethyl-l-butene from References 16 or 26, which are essentially identical, should be selected. These enthalpies were also selected in a previous section. However, there is too much inconstancy, as well as too much uncertainty, in the replacement reactions of carbonyls and olefins to be more definitive in our conclusions. [Pg.581]

Previously, Ohashi and his co-workers reported the photosubstitution of 1,2,4,5-tetracyanobenzene (TCNB) with toluene via the excitation of the charge-transfer complex between TCNB and toluene [409], The formation of substitution product is explained by the proton transfer from the radical cation of toluene to the radical anion of TCNB followed by the radical coupling and the dehydrocyanation. This type of photosubstitution has been well investigated and a variety of examples are reported. Arnold reported the photoreaction of p-dicyanobenzene (p-DCB) with 2,3-dimethyl-2-butene in the presence of phenanthrene in acetonitrile to give l-(4-cyanophenyl)-2,3-dimethyl-2-butene and 3-(4-cyanophenyl)-2,3-dimethyl-l-butene [410,411], The addition of methanol into this reaction system affords a methanol-incorporated product. This photoreaction was named the photo-NO-CAS reaction (photochemical nucleophile-olefin combination, aromatic substitution) by Arnold. However, a large number of nucleophile-incorporated photoreactions have been reported as three-component addition reactions via photoinduced electron transfer [19,40,113,114,201,410-425], Some examples are shown in Scheme 120. [Pg.215]

The intramolecular 13C isotope effects on the ene reaction with 102 oxygen were determined for 2,3-dimethyl-l-buten-3-ol 43 prepared from 2,3-dimethyl-but-2-ene 89... [Pg.180]

A detailed study of the reactions of trichlorogermane with unsaturated compounds was performed . It became clear that among selected olefins only 1-heptene forms the anti-Markovnikov adduct in the reaction with trichlorogermane. In contrast to the generally accepted opinion, in the reactions with 1-methylcyclohexene (equation 11), styrene (equation 12), 2,3-dimethyl-l-butene (equation 13) and isobutene (equation 14) both regioisomers 4 and 5, 6 and 7, 8 and 9, and 10 and 11 appear in commensurable amounts (together with oligomeric products see later, equation 16). [Pg.1495]

Catalytic hydrosilylation of alkenes performed in the presence of a chiral catalyst results in the formation of chiral silanes. Initially platinium catalysts of the type L PtCl2, L = (/ )-benzyl-(methyl)phenylphosphine (BMPP) or (/ )-methyl(phenyl)propylphosphine and 1,1-disubstituted prostereogenic alkenes, such as a-methylstyrene, 2,3-dimethyl-l-butene and 2-methyl-l-butene, were used however, the stereoselectivity was low4,5. A slightly higher stereoselectivity is obtained when dichlorobis[(/ )-benzyl(methyl)phenylphosphine]nickel [Ni(BMPP)2Cl2] is used as the catalyst. Note that two chiral silanes are formed in this reaction, both of which are products of anti-Markovnikov addition. The major product is the expected dichlorosilane 3, while the byproduct is an anomalous chlorosilane 4 both products were separated by fractional distillation and the major product methylated to give the trimethylsilanes 56 7. [Pg.1238]


See other pages where 3.3- Dimethyl-l -butene is mentioned: [Pg.824]    [Pg.1093]    [Pg.36]    [Pg.66]    [Pg.94]    [Pg.121]    [Pg.185]    [Pg.43]    [Pg.812]    [Pg.524]    [Pg.137]    [Pg.216]    [Pg.374]    [Pg.374]    [Pg.614]    [Pg.640]    [Pg.32]    [Pg.240]    [Pg.241]    [Pg.84]    [Pg.96]    [Pg.107]    [Pg.107]    [Pg.107]    [Pg.107]    [Pg.1495]    [Pg.257]    [Pg.257]    [Pg.141]    [Pg.121]    [Pg.130]    [Pg.296]    [Pg.481]    [Pg.594]    [Pg.424]    [Pg.322]   
See also in sourсe #XX -- [ Pg.43 ]




SEARCH



2 3 Dimethyl 1 butene

2.3- dimethyl-2-butene-l, 4-diyl

2.3- dimethyl-2-butene-l, 4-diyl magnesium

Guaiacic acid [4.4’-(2.3-Dimethyl-l-butene

© 2024 chempedia.info