Dimethyl acetal, formation from

Several industrial processes make use of anodic substitution in the side chain of alkyl aromatic compounds. Thus, aromatic aldehydes or aldehyde dimethyl acetals are generated at graphite electrodes in methanol. A typical example is the formation of 4-methoxybenzaldehyde (anisaldehyde) dimethyl acetal starting from 4-methoxytoluene [4] ... 

Schmidt and Wernicke74 have described a synthesis of digitalose starting with D-fucose dibenzyl mercaptal, which on condensation with acetone yielded the 4,5-isopropylidene derivative (LXXIV). Elimination of the dibenzyl mercaptal residues with mercuric chloride and cadmium carbonate in methanol gave 4,5-isopropylidene-D-fucose dimethylacetal (LXXV), from which the 2-benzyl ether was obtained on treatment with sodium and benzyl chloride. Methylation produced 2-benzyl-3-methyl-4,5-iso-propylidene-D-fucose dimethyl acetal (LXXVI), from which the iso-propylidene group was eliminated on treatment with methanolic hydrogen chloride, which also effected glycopyranoside formation (LXXVII). The... 

Davies and Warren" found that when 1,4-dimethylnaphthalene was treated with nitric acid in acetic anhydride, and the mixture was quenched after 34 hr, a pale yellow solid with an ultraviolet spectrum similar to that of a-nitro-naphthalene was produced. However, if the mixture was allowed to stand for 5 days, the product was i-methyl-4 nitromethylnaphthalene, in agreement with earlier findings. Davies and Warren suggested that the intermediate was 1,4-dimethyl-5 nitronaphthalene, which underwent acid catalysed rearrangement to the final product. Robinson pointed out that this is improbable, and suggested an alternative structure (iv) for the intermediate, together with a scheme for its formation from an adduct (ill) (analogous to l above) and its subsequent decomposition to the observed product. 

The addition proceeds most smoothly with highly functionalized (more polar) steroids as seen in examples by Bernstein and others. The polar reaction conditions pose solubility problems for lipophilic androstane, cholestane and pregnane derivatives. Improved yields can be obtained in some cases by using dimethyl sulfoxide or t-butanol " as solvents and by using sodium A-bromobenzenesulfonamide or l,3-dibromo-5,5-dimethyl hydantoin (available from Arapahoe Chemicals) as a source of positive bromine. The addition of bromo acetate and bromo formate to steroid olefins has been studied to a limited extent. ... 

The catalytic alcohol racemization with diruthenium catalyst 1 is based on the reversible transfer hydrogenation mechanism. Meanwhile, the problem of ketone formation in the DKR of secondary alcohols with 1 was identified due to the liberation of molecular hydrogen. Then, we envisioned a novel asymmetric reductive acetylation of ketones to circumvent the problem of ketone formation (Scheme 6). A key factor of this process was the selection of hydrogen donors compatible with the DKR conditions. 2,6-Dimethyl-4-heptanol, which cannot be acylated by lipases, was chosen as a proper hydrogen donor. Asymmetric reductive acetylation of ketones was also possible under 1 atm hydrogen in ethyl acetate, which acted as acyl donor and solvent. Ethanol formation from ethyl acetate did not cause critical problem, and various ketones were successfully transformed into the corresponding chiral acetates (Table 17). However, reaction time (96 h) was unsatisfactory. 

Partly saturated pyrazino[l,2-r-]pyrimidines were prepared by formation of the pyrazine ring. 2-Substituted-8-hydroxy-3,4-dihydro-177,277-pyrazino[l,2-r-]pyrimidin-l-ones were prepared by a [6+0] synthesis involving cyclization of 6-hydroxy-pyrimidine-4-(fV-hydroxyethyl)carboxamides <2005W02005/087766>. The 2/7-pyra-zino[l,2-c]pyrimidine-3-carboxamide 164 (Y = NH) was formed from [5+1] atom fragments via the uracil derivative 163 (Y = NH) and DMF-dimethyl acetal. Compounds 163 were prepared from 6-chloromethyluracil and glycine methyl ester 162 (Y = NH) (Scheme 20) <2004W02004/014354>. 

Various other examples in this chapter have already highlighted how N,N-dimeth-ylformamide dimethyl acetal can be efficiently utilized as a synthon for the construction of heterocydic rings (see Schemes 6.189, 6.194, 6.195, 6.229, and 6.230). West-man and coworkers have described a two-step method for the generation of a wide variety of heterocydic scaffolds, based on the initial formation of alkylaminoprope-nones and alkylaminopropenoates from N,N-dimethylformamide diethyl acetal (DMFDEA) and the corresponding CH-acidic carbonyl compounds (Scheme 6.256)... 

The latter reaction could be repeated ten times without loss of activity of Yb-XN-1010. Similar results were obtained with ytterbium(III) loaded Amberlyst 15W resin in a two-step one-pot procedure first involving the formation of the active dimethyl acetal from a benzaldehyde derivative which was followed by in situ protection of sucrose (Scheme 4.17) [100]. 

Although one diastereomer 10 was largely favored, the product was obtained as a mixture of diastereomers, and the previously unreported minor diastereomer 11 was also characterized. The stereochemistry of the products was established by nuclear Overhauser effect (NOE) studies. A plausible mechanism assumes the intermediacy of an acetal, and its reaction with 2-methoxypropene generated from 2,2-dimethoxypropane [20]. In order to test this mechanism, the dimethyl acetal of salicylaldehyde was synthesized and reacted independently with both 2,2-dimethoxypropane and 2-methoxypropene. Indeed, both reactions gave the same products as those from the reaction of salicylaldehyde with 2,2-dimethoxypropane (Scheme 4). The condensation of salicylaldehyde and 2,2-dimethoxypropane was also carried out in CD3CN and reaction progress was followed by H NMR spectroscopy. This experiment also confirmed the formation of the acetal from salicylaldehyde (8 5.52, singlet, C//(OMe)2). 

Figure 7 shows the results of methyl acetate carbonylation in the presence of water. Methanol and dimethyl ether were formed up to 250 C suggesting that hydrolysis of methyl acetate proceeded. With increasing reaction temperature, the yield of acetic acid increased remarkably, while those of methanol and dimethyl ether decreased gradually. Figure 8 shows the effects of partial pressures of methyl iodide, CO, and methyl acetate in the presence of water. The rate of acetic acid formation was 1.0 and 2.7 order with respect to methyl iodide and CO, respectively. Thus, the formation of acetic acid from methyl acetate is highly dependent on the partial pressure of CO. This suggests that acetic acid is formed by hydrolysis of acetic anhydride (Equation 6) which is formed from methyl acetate and CO rather than by direct hydrolysis of methyl acetate. 

The volatile components identified from the reaction of cystine and DMHF in aqueous medium are shown in Table I. 2,4-Hexanedione, 3,5-dimethyl-l,2,4-trithiolanes and thiophenes are the major compounds. The mechanistic relationship of the three thiophenones produced has been postulated (23). The major groups of volatile components identified from the reaction in the glycerol medium are 1,3-dioxolanes and thiazoles (Table II). 1,3-Dioxolanes are formed by the reaction of glycerol and the degraded carbonyls by ketal or acetal formations. Comparison of the reaction of cystine and DMHF in water and in glycerol is outlined in Table III. 

One method for the synthesis of hydroxyalkyl-substituted P-lactams is by the Staudinger reaction, the most frequently used method for the synthesis of P-lactams.86 This method for the preparation of 4-acetoxy- and 4-formyl-substituted P-lactams involves the use of diazoketones prepared from amino acids. These diazoketones are precursors for ketenes, in a diastereoselective, photochemically induced reaction to produce exclusively tram-substituted P-lactams. The use of cinnamaldimines 96, considered as vinylogous benzaldimines, resulted in the formation of styryl-substituted P-lactams. Ozonolysis, followed by reductive workup with dimethyl sulfide, led to the formation of the aldehyde 97, whereas addition of trimethyl orthoformate permitted the production of the dimethyl acetal 98 (Scheme 11.26). 

When 2-methoxycycloalkyl phenyl telluriums, prepared from cycloalkenes and phenyl tellurium trichloride in methanol, are treated with 3-chloroperoxybenzoic acid, the elimination of the phenyltelluro group is accompanied by ring-contraction and formation of the dimethyl acetals of formylcycloalkanes2 3. 

---