Differential scanning calorimetry melts

FIGURE 3.1 Differential scanning calorimetry melting curves (scan rate 0.04°C/min) of trimyristin dispersions (10% triglyceride stabilized with different concentrations of tyloxapol) with different mean photon correlation spectroscopy z-average diameters. The raw material was dispersed in an aqueous phase containing 1% tyloxapol. (Adapted from [1]. Copyright 2000, American Chemical Society. With permission.)... 

Thermal Behavior. The thermal behavior of the compounds prepared in this study was investigated using a capillary melting point apparatus, hot stage polarized light microscopy, and differential scanning calorimetry. Melting was not observed... 

Fig. 6. Differential scanning calorimetry melting points of extrudates (at a heating rate of 10 K/min). Extrusion temperature 100 °C, die diameter 2.5 mm. (O) H020-54, (A) R006-60, (V) R40 (for sample description see Table 2)35)...

The crystal stmcture of glycerides may be unambiguously determined by x-ray diffraction of powdered samples. However, the dynamic crystallization may also be readily studied by differential scanning calorimetry (dsc). Crystallization, remelting, and recrystallization to a more stable form may be observed when Hquid fat is solidified at a carefully controlled rate ia the iastmment. Enthalpy values and melting poiats for the various crystal forms are shown ia Table 3 (52). 

Most hydrocarbon resins are composed of a mixture of monomers and are rather difficult to hiUy characterize on a molecular level. The characteristics of resins are typically defined by physical properties such as softening point, color, molecular weight, melt viscosity, and solubiHty parameter. These properties predict performance characteristics and are essential in designing resins for specific appHcations. Actual characterization techniques used to define the broad molecular properties of hydrocarbon resins are Fourier transform infrared spectroscopy (ftir), nuclear magnetic resonance spectroscopy (nmr), and differential scanning calorimetry (dsc). 

Fig. 10. Differential scanning calorimetry of cellulose triacetate. Second heating at 20°C/min. glass-transition (T temperature = 177 " C crystallization on heating (T)/j) = 217 C melting temperature (Ta) = 289 C. To convert to cal, divide by 4.184.

The SCB distribution (SCBD) has been extensively studied by fractionation based on compositional difference as well as molecular size. The analysis by cross fractionation, which involves stepwise separation of the molecules on the basis of composition and molecular size, has provided information of inter- and intramolecular SCBD in much detail. The temperature-rising elution fractionation (TREE) method, which separates polymer molecules according to their composition, has been used for HP LDPE it has been found that SCB composition is more or less uniform [24,25]. It can be observed from the appearance of only one melt endotherm peak in the analysis by differential scanning calorimetry (DSC) (Fig. 1) [26]. Wild et al. [27] reported that HP LDPE prepared by tubular reactor exhibits broader SCBD than that prepared by an autoclave reactor. The SCBD can also be varied by changing the polymerization conditions. From the cross fractionation of commercial HP LDPE samples, it has been found that low-MW species generally have more SCBs [13,24]. 

Reactive compatibilization of engineering thermoplastic PET with PP through functionalization has been reported by Xanthos et al. [57]. Acrylic acid modified PP was used for compatibilization. Additives such as magnesium acetate and p-toluene sulfonic acid were evaluated as the catalyst for the potential interchange or esterification reaction that could occur in the melt. The blend characterization through scanning electron microscopy, IR spectroscopy, differential scanning calorimetry, and... 

Many papers deal with the crystallization of polymer melts and solutions under the conditions of molecular orientation achieved by the methods described above. Various physical methods have been used in these investigations electron microscopy, X-ray diffraction, birefringence, differential scanning calorimetry, etc. As a result, the properties of these systems have been described in detail and definite conclusions concerning their structure have been drawn (e.g.4 13 19,39,52)). 

Triethanolamine salts of alcohol sulfates form white crystals when obtained in pure form after recrystallization. At their melting point they are semisolid with gelatinous appearance and the transition is difficult to detect. Melting points, determined through thermograms obtained by differential scanning calorimetry, gave 72, 76, 80, and 86°C for dodecyl, tetradecyl, hexadecyl, and octadecyl sulfates, respectively [63]. 

FIGURE 31.2 Plots of crystalline melting point, heat of fusion and percent crystallinity of ethylene-vinyl acetate (EVA) samples versus (a) radiation dose (b) trimethylolpropane trimethacrylate (TMPTMA) level from differential scanning calorimetry (DSC) studies. (From Datta, S.K., Bhowmick, A.K., Chaki, T.K., Majali, A.B., and Deshpande, R.S., Polymer, 37, 45, 1996. With permission.)... 

We analyzed the embedded particles with differential scanning calorimetry to identify the property of polystyrene. As shown in Fig, 1, fhe embedded particles show a small peak around 100 °C, which is typical in atactic polystyrene [7]. It is desirable that embedding polymer has a similar melting tempeiature as the final polymer (polyethylene) because a big difference in the melting temperatures between the two polymers may cause a gel problem and poor mechanical properties. 

Brittle colorless films of PBPP may be cast from tetrahydrofuran solution. The insoluble portion of PBPP is swelled by the tetrahydrofuran and gives rise to free-standing films on solvent evaporation. Differential scanning calorimetry experiments on PBPP show a glass transition temperature at 40 °C, and some indication of a melting transition at 170° C. 

---