Diethyl maleate/fumarate

More recently, Cheeseman and coworkers have investigated cycloaddition reactions of 2,6-dioxypyrazines (80jCS(Pl)1603). 2,6-Dihydroxy-3,5-diphenylpyrazine (77) reacts with electron deficient dienophiles such as iV-phenylmaleimide, diethyl maleate and diethyl fumarate (Scheme 26) to yield adducts of the 3,8-diazabicyclo[3.2.1]octane class such as (78). This reaction is believed to proceed by way of the betaine (79) and has precedent (69AG(E)604) in that photolysis of the bicyclic aziridine (80) generates analogous betaines which have been trapped in cycloaddition reactions. 

Trifluoromethylation of diethyl maleate or fumarate is performed via the electrochemical oxidation of sodium trifluoroacetate [742] (equation 123)... 

In a similar manner diethyl maleate (actually diethyl fumarate since the basic enamine catalyzes the maleate s isomerization upon contact) forms unstable 1,2 cycloadducts with enamines with hydrogens at temperatures below 30°C (37). At higher temperatures simple alkylated products are formed (41). Enamines with no )3 hydrogens form very stable 1,2 cycloadducts with diethyl maleate (36,37,41). The two adjacent carboethoxy groups of the cyclobutane adduct have been shown to be Irons to one another (36,37). 

The feed materials for malathion manufacture are 0,0-dimethyl phosphorodithioic acid and diethyl maleate or fumarate which react according to the equation ... 

Bamford and Mullik [23] have also investigated a new photoinitiating system composed of Mn2(CO)io or Re2(CO)io with acetylene, acetylene dicarboxylic acid, diethyl fumarate, diethyl maleate, or maleic anhydride. It was concluded that the primary radical responsible... 

The Diels-Alder cycloaddition reaction (Section 14.4) is a pericvclic process that takes place between a diene (four tt electrons) and a dienophile (two tr electrons) to yield a cyclohexene product. Many thousands of examples of Diels-Alder reactions are known. They often take place easily at room temperature or slightly above, and they are stereospecific with respect to substituents. For example, room-temperature reaction between 1,3-butadiene and diethyl maleate (cis) yields exclusively the cis-disubstituted cyclohexene product. A similar reaction between 1,3-butadiene and diethyl fumarate (trans) yields exclusively the trans-disubstituted product. 

The results of Diels-Alder reactions of cyclopentadiene with diethyl fumarate, diethyl maleate and ethyl acrylate carried out in SC-H2O are reported in Scheme 6.32 [79]. The cycloaddition of diethyl fumarate occurred with low yield. 

Surprisingly, the 7t-system geometry in a substrate has a notable influence in the enzymatic aminolysis of esters. The reaction of diethyl fumarate with different amines or ammonia in the presence of CALB led to the corresponding trans-amidoesters with good isolated yields, but in the absence of enzyme, a high percentage of the corresponding Michael adduct is obtained (Scheme 7.9). Enzymatic aminolysis of diethyl maleate led to the recovery of the same a, P-unsaturated amidoester, diethyl fumarate, and diethyl maleate. The explanation of these results can be rationalized via a previous Michael/retro-Michael type isomerization of diethyl maleate to fumarate, before the enzymatic reaction takes place. In conclusion, diethylmaleate is not an adequate substrate for this enzymatic aminolysis reaction [23]. 

Treatment of 3-(2-pyrrolidino)pyridine with 2 molar equiv of diethyl acetylenedicarboxylate under microwave conditions gives the tetrahydropyrrolonaphthyridine 283 and (presumably) diethyl maleate or fumarate. Under conventional heating conditions, decarboxylated products are also observed (Scheme 71) <2005TL3953>. 

The common by-products obtained in the transition-metal catalyzed reactions are the formal carbene dimers, diethyl maleate and diethyl fumarate. In accordance with the assumption that they owe their formation to the competition of olefin and excess diazo ester for an intermediate metal carbene, they can be widely suppressed by keeping the actual concentration of diazo compound as low as possible. Usually, one attempts to verify this condition by slow addition of the diazo compound to an excess (usually five- to tenfold) of olefin. This means that the addition rate will be crucial for the yields of cyclopropanes and carbene dimers. For example, Rh6(CO)16-catalyzed cyclopropanation of -butyl vinyl ether with ethyl diazoacetate proceeds in 69% yield when EDA is added during 30 minutes, but it increases to 87 % for a 6 h period. For styrene, the same differences were observed 65). 

EvenPd(OAc)2 is not effective in catalyzing the cyclopropanation of a,P-unsaturated nitriles by ethyl diazoacetate. Instead, vinyloxazoles 92 are formed from acrylonitrile or methacrylonitrile by carbenoid addition to the CsN bond 143 Diethyl maleate and diethyl fumarate as well as polyketocarbenes are by-products in these reactions the 2-pyrazoline which would result from initial [3 + 2] cycloaddition at the C=C bond and which is the sole product of the uncatalyzed reaction at room temperature, can be avoided completely by very slow addition of the diazoester... 

The EfZ ratio of stilbenes obtained in the Rh2(OAc)4-catalyzed reaction was independent of catalyst concentration in the range given in Table 22 357). This fact differs from the copper-catalyzed decomposition of ethyl diazoacetate, where the ratio diethyl fumarate diethyl maleate was found to depend on the concentration of the catalyst, requiring two competing mechanistic pathways to be taken into account 365), The preference for the Z-stilbene upon C ClO -or rhodium-catalyzed decomposition of aryldiazomethanes may be explained by the mechanism given in Scheme 39. Nucleophilic attack of the diazoalkane at the presumed metal carbene leads to two epimeric diazonium intermediates 385, the sterically less encumbered of which yields the Z-stilbene after C/C rotation 357,358). Thus, steric effects, favoring 385a over 385 b, ultimately cause the preferred formation of the thermodynamically less stable cis-stilbene. 

A somewhat unusual copper catalyst, namely a zeolite in which at least 25% of its rhodium ions had been exchanged by Cu(II), was active in decomposition of ethyl diazoacetate at room temperature 372). In the absence of appropriate reaction partners, diethyl maleate and diethyl fumarate were the major products. The selectivity was a function of the zeolite activation temperature, but the maleate prevailed in all cases. Contrary to the copper salt-catalyzed carbene dimer formation 365), the maleate fumarate ratio was found to be relatively constant at various catalyst concentrations. When Cu(II) was reduced to Cu(I), an improved catalytic activity was observed. 

CsF induces the ring-opening cyclization of the thus obtained l-[2-(trimethylsilylmethyl)cyclopropylcarbonyl] imidazole 154 with diethyl fumar-ate or diethyl maleate to give the cyclobutanone 155 [80], The facile ring fission of 154 also occurs in the presence of BF3OEt with the formation of the corresponding y,<5-unsaturated carboxylic acid. (Scheme 55)... 

Diethyl fumarate and diethyl maleate reacted with the allenic ester to yield trans-and cis-265, respectively, as the single product. 

Another example of type iii-a is the trifluoromethylation of double bonds by electrolysis of trifluoroacetic acid in the presence of olefins. Methyl vinyl ketone, vinyl acetate, diethyl fumarate, diethyl maleate, Ai-ethylmaleimide, and 2,5-dihydrothiophene-l,1-dioxide were examined as olefins. The products were bis-trifluoromethylated additive dimers (66) (type iii-a) and monomers (67) (type... 

A plausible reaction mechanism for this reaction was proposed by the authors. The Cu(i) carbene 182 generated from ethyl diazoacetate and the chiral Gu(i) complex can either react with another molecule of ethyl diazoacetate to form a mixture of diethyl maleate and fumarate 183, or with the imine lone pair to form a Gu(i)-complexed azomethine ylide... 

The cycloaddition of allenes to symmetrically disubstituted alkenes gives mixtures of cyclobutanes with stereochemical equilibration of the substituents. The reaction of 1,3-dimethylallenc with either diethyl fumarate or diethyl maleate produces a mixture of the /raw.v-bis(ethoxycar-bonyl)cyclobutanes.s The same nonstereoselectivity was observed for phenylallene and 1,1-dimelhylallene cycloadditions to maleic and fumaric acid diesters.9 10... 

Cyclopropanation.2 This metal carbonyl cluster is an effective catalyst for cyclo-propanation of alkenes with ethyl diazoacetate. Minor by-products are diethyl maleate and fumarate, but products of allylic C -H insertion are not formed. The yield of the cyclopropane can be increased if the ethyl diazoacetate is added slowly over a period of 6 hours to the olefin and catalyst. Under these conditions yields of eyclopropanes are 85 -90%. 

Exercise 10-26 a. Bromine adds to diethyl fumarate (diethyl frans-butenedioate) to give the meso adduct 7, and to diethyl maleate (diethyl c/s-butenedioate) to give the d,l adduct 8, provided that the reaction mixtures are kept at 25° or less and are carefully protected from light. Deduce whether the stereochemistry of the reaction is suprafacial or antarafacial under these conditions. 

The reactive 2/f,5//-benzo[l,2-6 4,5-6 ]bisthiete (81) reacts readily in toluene at 90°C with (E)-1,2-bis(4-hexyloxyphenyl)ethene, dimethyl fumarate, or diethyl maleate to furnish the compounds (82 R = 4-hexyloxyphenyl, C02Me, and C02Et). Reaction with DMAD yields the tetraester derivative (83) <94AG(E)465>. 

---