Dienones, preparation

Placement of the allylsilane appendage onto the C(2) position of the conjugate dienone proved difficult to achieve via conventional methods and required the development of a new dienone preparation. Nevertheless, cyclization of various 2-isobutenyl dienones gave functiondized 5,7-bicyclic enones in high yields, independent of the reaction scale (Table 2). 

The intramolecular oxidative earbonylation has wide synthetie applieation. The 7-lactone 247 is prepared by intramolecular oxycarbonylation of the alke-nediol 244 with a stoichiometric amount of Pd(OAc)2 under atmospheric pres-sure[223]. The intermediate 245 is formed by oxypalladation, and subsequent CO insertion gives the acylpalladium 246. The oxycarbonylation of alkenols and alkanediols can be carried out with a catalytic amount of PdCl2 and a stoichiometric amount of CuCb, and has been applied to the synthesis of frenolicin(224] and frendicin B (249) from 248[225]. The carbonylation of the 4-penten-l,3-diol 250, catalyzed by PdCl2 and CuCl2, afforded in the c -3-hydroxytetrahydrofuran-2-aeetie acid lactone 251[226J. The cyclic acetal 253 is prepared from the dienone 252 in the presence of trimethyl orthoformate as an accepter of water formed by the oxidative reaction[227]. 

Another preparative method for the enone 554 is the reaction of the enol acetate 553 with allyl methyl carbonate using a bimetallic catalyst of Pd and Tin methoxide[354,358]. The enone formation is competitive with the allylation reaction (see Section 2.4.1). MeCN as a solvent and a low Pd to ligand ratio favor enone formation. Two regioisomeric steroidal dienones, 558 and 559, are prepared regioselectively from the respective dienol acetates 556 and 557 formed from the steroidal a, /3-unsaturated ketone 555. Enone formation from both silyl enol ethers and enol acetates proceeds via 7r-allylpalladium enolates as common intermediates. 

Iron pentacarbonyl and l-methoxy-l,4-cyclohexadiene react as shown by Birch and oo-workera, but in dibutyl ether this solvent has been found superior. The tricarbonyl(methoxy-l,3-cyclohexadiene)iron isomers undergo hydride abstraction with triphenylmethyl tetrafluoro-borate to form the dienyl salt mixture of which the 1-methoxy isomer is hydrolyzed by water to the cyclohexadienone complex. The 2-methoxy isomer can be recovered by precipitation as the hexafluoro-phosphate salt. By this method the 3-methyl-substituted dienone complex has also been prepared from l-methoxy-3-methylbenzene. The use of the conjugated 1-methoxy-1,3-cyclohexadiene in Part B led to no increase in yield or rate and resulted chiefly in another product of higher molecular weight. An alternative procedure for the dienone is to react tricarbonyl(l,4-dimethoxycyclohexadiene)iron with sulfuric acid. ... 

Enolizalion of conjugated or /3,y-unsatiirated enones and dienones in O-deiiterated solvents facilitates the introduction of deuterium labels into positions as far as three and five carbon atoms away from a given ketone function. Exchange of the activated hydrogens in androst-4-en-3-one (12) provides a good illustration of the potential of this method. Saturation of the double bond (section V) in the deuterated enone (13) followed by back exchange of the a-deuteriums (section II-B) proves to be an excellent method for the preparation of 6,6-d2-5a-androstan-3-one (15). ... 

Cross-conjugated dienones are quite inert to nucleophilic reactions at C-3, and the susceptibility of these systems to dienone-phenol rearrangement precludes the use of strong acid conditions. In spite of previous statements, A " -3-ketones do not form ketals, thioketals or enamines, and therefore no convenient protecting groups are available for this chromophore. Enol ethers are not formed by the orthoformate procedure, but preparation of A -trienol ethers from A -3-ketones has been claimed. Another route to A -trien-3-ol ethers involves conjugate addition of alcohol, enol etherification and then alcohol removal from la-alkoxy compounds. 

Semicarbazones are prepared in high yields from A " -3-ketones. However, regeneration of the parent dienone is usually difficult and inefficient and very low yields are usually obtained on hydrolysis by nitrous acid, hydrochloric acid or acetic anhydride-pyridine. " In some examples higher yields have been obtained with aqueous acetic acid. ... 

Benzyne, intermediate in preparation of phenyl t butyl ether, 46, 90 methods for generation of, 46, 112 trapping by tetraphenylcyclopenta-dienone, 46,112... 

The dienone, which is prepared essentially as described by Benedikt7 and Calo,8 monobrominates a wide range of primary, secondary, and tertiary aromatic amines almost exclusively in the para-position. The procedure described is of general synthetic utility for the preparation of para-brominated aromatic and heteroaromatic amines in high yields and frequently in a high state of purity. The submitters have used this technique to para-brominate many compounds in quantities... 

Finally in 2005, Hutt and Mander reported their strategy for the synthesis of nominine (Scheme 1.3) [29], The approach relies upon construction of the steroidal ABC carbocyclic ring structure followed by stepwise preparation of the fused aza-ring system. In the key sequence of the synthetic study, enone 50 was oxidized to dienone 51 with DDQ followed by Lewis acid-catalyzed intramolecular conjugate addition of the methylcarbamate to the newly formed dienone to deliver pyrrolidine 52. 

A simple two-step protocol for the generation of a terminal diene is to add allyl magnesium bromide to an aldehyde or a ketone and subsequent acid or base catalysed dehydration (equation 34)72. Cheng and coworkers used this sequence for the synthesis of some indole natural products (equation 35)72a. Regiospecific dienones can be prepared by 1,2-addition of vinyllithium to a,/l-unsaturated carbonyl compounds and oxidative rearrangement of the resulting dienols with pyridinium dichromate (equation 36)73. 

Dienones of this class are useful starting materials for the preparation of bicyclic compounds via Diels-Alder reactions1 4 and for the synthesis of small ring compounds.6 The 2,4-dienone can be converted quantitatively to the 2,5-isomer by treatment with fuming sulfuric acid and subsequent hydrolysis.6 The oxidation procedure is also applicable to the conversion of mesity-lene to mesitol or of isodurene to isodurenol,7 and can be used to convert tetramethyl ethylene quantitatively and directly to pinacolone.8... 

A new method, reported by Pearlman (262), for the preparation of Woodward s key building block also constitutes a new synthesis of reserpine as well as deserpidine. In the key step of the synthesis an internal (2ir + 2-tt] photocycliza-tion of dienone 518 gave cyclobutane derivative 519 with the established stereochemistry. Methanolysis and subsequent peracid treatment of 520 yielded lactone ester 521. Repeated methanolysis and retroaldol fission of the cyclobutane... 

Addition of P—H bonds to unsaturated systems also continues to be used as a route to heterocyclic systems. Thus base-catalysed cyclization of the phosphine (32) [prepared by the addition of methyl methacrylate (2 moles) to phenylphosphine], followed by subsequent hydrolysis and decarboxylation, affords the phosphorinanone (33). The phosphorinanone system is also directly accessible by the addition of phenylphosphine to divinyl ketones.28 The radical-initiated addition of phenylphosphine to dialkynyl systems (34) gives the heterocyclohexadienes (35).29 80 The stereochemistry of the addition of phenylphosphine to cyclo-octa-2,7-dienone to give... 

The second example is an intermolecular crystal-state reaction. Cross-conjugated 1,5-disubstituted 1,4-dien-3-ones in solution undergo both cis-trans photoisomerization and photodimerization, yielding complex mixtures of products, including die all-trans-substituted cyclobutane 2 in the case of 1,5-diphenyl-1,4-pentadien-3-one. In contrast, dienones such as 3a in whose crystals adjacent molecules lie parallel and strongly overlapped react in the solid to give 3b as the sole photoproduct. This isomerically pure tricyclic diketone results, formally, from an eight-center dimerization. It is not formed in the reaction in solution, and could be prepared by other methods only with considerable difficulty (4). 

The first 1,6-addition reactions of thiolates to steroid dienones were examined well before the discovery of the antiestrogenic properties of 7o -substituted steroids. Ralls and coworkers129 and Djerassi and coworkers130 studied thiol additions to A3,5-steroids for example, the reaction of 3,5-cholestadien-7-one with ethanethiol was reported to proceed with high 1,6-regioselectivity and -stereoselectivity (equation 47)129. In a series of papers, Brueggemeier and coworkers131-137 described the synthesis and biochemical evaluation of numerous 7at-sul fur-substituted steroids which were prepared by Michael addition to steroid dienones. Thus, 4,6-androsta-3,17-dienone was treated with various... 

Bis-allylic oxidation of 23 and related cyclohexa-1,4-dienes provides a convenient and general preparation of cyclohexa-2,5-dien-l-ones (Scheme 7). These cross-conjugated die-nones are substrates for a variety of photochemical rearrangement and intramolecular cycloaddition reactions. Amide-directed hydrogenations of dienones 24a and 24b with the homogeneous iridium catalyst afford cyclohexanones 25a and 25b, containing three stereogenic centers on the six-... 

The trienedione 7 was prepared using a sequence in which palladium-catalysed couplings were featured, (Scheme 8). In addition, the alkyne moiety of the chloroenyne 8 was partially reduced and the secondary alcohol group oxidised to give the dienone 9. 

Condensed derivatives have also been prepared. Reaction of 2-aminothi-azoles with 2,3-dichloro-l,4-naphthoquinone yields naphth[2,3-h]im-idazo[2,l-h]thiazole-5,10-dienones 62 via thiazolylaminoquinones 61. Cycli-zation can be effected either with diethylaniline (method a) [77IJC(B)356] or with sodium hydroxide and tetrabutylammonium bromide (TBAB) catalyst (method b) (82H333). Following route b, compound 62 (R = Et) can be isolated in 92% yield. Reactions between 2-aminothiazoles and chloranil leading to dithiazolobenzobisimidazolediones have also been reported [79IJC(B)523]. 

---