Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Diaphragm press

Another name for the inflatable diaphragm which takes the place of the curing bag in the automatic curing of pneumatic tyres in a diaphragm press. Blanc Fixe... [Pg.14]

The flexible membrane or bladder which supplies internal pressure in the curing of pneumatic tyres in diaphragm presses of the Bag-o-matic or Autoform type. [Pg.22]

The best way to evaluate diaphragm presses for an application is to run tests with a small pilot unit. Although smaller test units are available, pilot units with 1-fF filter plate area are more common and are recommended. [Pg.2080]

Horizontal Diaphragm Presses This is similar to the diaphragm press except the filter plates lay horizontally (while in diaphragm press, the filter plates are operated vertically). The press can be a singlechamber unit, or multiple chambers can be stacked to achieve greater filtration area. [Pg.2080]

The testing for evaluating the horizontal diaphragm press is the same as that described above for the (vertical) diaphragm presses. To ensure automatic operation, the cake solids should not stick to the seal of the filter chamber and need to be carefully evaluated during testing. [Pg.2080]

Tower Presses This press is similar to the stacked horizontal diaphragm presses, but only one filter belt is used (Fig. 18-191). The operation is also fully automatic. The primary applications are in chemical, mineral and pharmaceutical industries. The testing method is the same as the diaphragm presses. One important factor in designing a tower press is the sohds need to be able to be cleared from the chamber sed, otherwise leakage will occur in the following filtration cycle. [Pg.2081]

The same laboratory testing equipment as in the diaphragm press can be used but with a higher pressure. A commercially available piston press can also be used. [Pg.2081]

FIG. 18-190 A horizontal diaphragm press. (Courtesy ofFiltm Systems.)... [Pg.146]

Plate data Conventional press Diaphragm press ... [Pg.460]

Modem centrifuge Diaphragm press Old-style centrifiige Beh press... [Pg.466]


See other pages where Diaphragm press is mentioned: [Pg.56]    [Pg.364]    [Pg.22]    [Pg.22]    [Pg.45]    [Pg.56]    [Pg.364]    [Pg.2079]    [Pg.2079]    [Pg.2079]    [Pg.2079]    [Pg.2080]    [Pg.2080]    [Pg.144]    [Pg.144]    [Pg.144]    [Pg.144]    [Pg.145]    [Pg.145]    [Pg.1648]    [Pg.207]    [Pg.2067]    [Pg.2067]    [Pg.2067]    [Pg.2067]    [Pg.2068]    [Pg.2068]    [Pg.460]   
See also in sourсe #XX -- [ Pg.466 ]




SEARCH



Diaphragm filter press

Diaphragm operating press cycle

Diaphragm plate filter press

Diaphragm press cake discharge

Example 6.1 Horizontal diaphragm filter press

Vertical diaphragm press cycle

Vertical diaphragm presses

© 2024 chempedia.info