Decenes, addition

There is a pronounced tendency for boron to become bonded to the less substituted car bon of the double bond Thus the hydrogen atoms of diborane add to C 2 of 1 decene and boron to C 1 This is believed to be mainly a steric effect but the regioselectivity of addition does correspond to Markovmkov s rule m the sense that hydrogen is the neg atively polarized atom m a B—H bond and boron the positively polarized one... 

The a-methylene groups also add to double bonds eg, 1-decene at 160°C gives up to 80% of a-decylbutyrolactone (160). With photochemical initiation similar additions take place at room temperature (161). 

In cases where the alkene is soluble, up to 30 S of the aqueous DMF can be mixed with the alkene to facilitate controlled addition. With 1-decene, QHF forms a two-phase mixture. 

In 1988, Terry and coworkers attempted to homopolymerize ethylene, 1-octene, and 1-decene in supercritical C02 [87], The purpose of their work was to increase the viscosity of supercritical C02 for enhanced oil recovery applications. They utilized the free radical initiators benzoyl peroxide and fert-butyl-peroctoate and conducted polymerization for 24-48 h at 100-130 bar and 71 °C. In these experiments, the resulting polymers were not well studied, but solubility studies on the products confirmed that they were relatively insoluble in the continuous phase and thus were not effective as viscosity enhancing agents. In addition, a-olefins are known not to yield high polymer using free radical methods due to extensive chain transfer to monomer. 

Use of less sterically hindered examples of 5 in combination with MAO allows for active catalysts for the linear (head-to-head) dimerisation of a-olefins such as 1-butene, 1-hexene, 1-decene and Chevron Phillips C20-24 a-olefin mixture (Scheme 4) [47], The mechanism for dimerisation is thought to involve an initial 1,2-insertion into an iron-hydride bond followed by a 2,1-insertion of the second alkene and then chain transfer to give the dimers. Structurally related cobalt systems have also been shown to promote dimerisation albeit with lower activities [62], Oligomerisation of the a-olefms propene, 1-butene and 1-hexene has additionally been achieved with the CF3-containing iron and cobalt systems 5j and 6j yielding highly linear dimers [23],... 

Cyclic stannanes can be generated by reaction of stannylenes with alkynes112. For example, bis[bis(trimethylsilyl)methyl]tin reacts with cyclooctyne to provide A1,18-9,10-(distanna-9,9,10,10-tetrakis[bis(trimethylsilyl)methyl])bicyclo[6,2,0]-decene, 69. This reaction is a typical oxidative addition on stannylenes. 

With chiral phosphoramidite (S,R,R) 29, 3-ethylcyclohexanone, 3-ethylcycloheptanone, and 3-ethylcyclooctanone were obtained with >97% ee s.37,39 (R,R,R)-32 also showed excellent enantioselectivity in the addition of Et2Zn to both 2-cyclohexenone (93% ee) and larger ring enone as 2-cyclopenta-decen-l-one (95% ee).40... 

Decene was hydrocarboxylated with a [PdClaj/TPPTS catalyst in acidic aqueous solutions (pH adjusted to 1.8) in the presence of various chemically modified cyclodextrins (Scheme 10.11) [18]. As in most cases, the best results were obtained with DiOMe-P-CD. In an interesting series of reactions 1-decene was hydrocarboxylated in 50 50 mixtures with other compounds. Although all additives decreased somewhat the rate of 1-decene hydroformylation, the order of this inhibitory effect was 1,3,5-trimethylbenzene < cumene < undecanoic acid, which corresponds to the order of the increasing stability of the inclusion complexes of additives with p-CD, at least for 1,3,5-trimethylbenzene (60 M ) and cumene (1200 M ). These results clearly show the possible effect of competition of the various components in the reaction mixture for the cyclodextrin. 

The addition of tellurium tetrachloride to alkenes produces chloroalkyltellurium trichlorides. Butenes, 1-decene, cycloalkenes, and 3-substituted 1-propenes give mixtures of syn and anti additions. ... 

Additional representatives of six-membered 5-lactones are 5-decalactone 155, constituent of fruits, cheese and dairy products with creamy-coco nut and peachy aroma, jasmolactone 156 as well as 5-2-decenolactone (2-decen-5-olide) 157 (Structure 4.47). 

Since proton addition is known (3, 4) to be a rate-determining step in the chemical reduction of aromatic and olefinic double bonds in the alkali-amine system, the effect of adding a proton donor (ferf-butyl alcohol) on current efficiency in the electrochemical reduction of 1-decene was investigated. 

The best procedure to get the desired product is to generate the 1-alkene from the borane with 1-decene (Section 11-6C) and then add hydrogen bromide by a polar mechanism (Section 10-4). Incursion of radical-chain addition must... 

A study using triolein under the same conditions produced seven major volatile compounds from oleate (heptane, octane, heptanal, octanal, nonanal, 2-decenal, and 2-undecenal) as well as other minor components. Addition of stearate to the reaction substrate produced added volatiles previously identified as originating from tristearin alone (Selke et al., 1977). 

Majetich reports a general intramolecular Lewis acid allylation protocol for the synthesis of bicy-clo[5.4.0]undecen-3-ones (168) and bicyclo[4.4.0]decen-3-ones (170), which are 1,6-addition products (Scheme 27). The same precursors, (167) and (169), when submitted to the fluoride ion cyclization protocol, also afford 1,2- and 1,4-addition products.73 Typically, ethylaluminum dichloride, a proton sponge Lewis acid, is used in order to minimize adventitious protonic desilylation. Other 0,y-unsatu-rated silanes also undergo similar intramolecular Lewis acid catalyzed additions for example, the si-lylpropargylic enones (171) undergo intramolecular cyclization to the allenylspiro system (172).74... 

---