Cyclobutenes cycloaddition

Cycloaddition of norbornadiene with allene takes place to yield the cyclobutene derivative 10[5], Cyclodimerization of 1,2-cyclononadiene (11) affords a mixture of stereoisomers of the cyclobutane derivatives 12[6,7],... 

CycIoa.ddltlons. Cyclobutene adducts are formed from the reaction of acetylenic derivatives and maleic anhydride through a 2 + 2 cycloaddition (48). The reaction is photochemicaHy cataly2ed (see Photochemical technology). 

Fluorinated cyclobutanes and cyclobutenes are relatively easy to prepare because of the propensity of many gem-difluoroolefins to thermally cyclodimerize and cycloadd to alkenes and alkynes. Even with dienes, fluoroolefins commonly prefer to form cyclobutane rather than six-membered-ring Diels-Alder adducts. Tetrafluoroethylene, chlorotrifluoroethylene, and l,l-dichloro-2,2-difluoroethyl-ene are especially reactive in this context. Most evidence favors a stepwise diradical or, less often, a dipolar mechanism for [2+2] cycloadditions of fluoroalkenes [S5, (5], although arguments for a symmetry-allowed, concerted [2j-t-2J process persist [87], The scope, characteristic features, and mechanistic studies of fluoroolefin... 

Fluoroalkyl acetylenes are powerful enophiles and Diels-Alder dienophiles but also can give good yields of cyclobutenes in their cycloadditions [115,116,117] (equations 48 and 49)... 

Cycloadditions ot diazomethane with fluonnated cyclobutenes provide insight into those factors that govern the reactivity and regioselectivity of such reactions Although 3,3,4,4-tetrafluorocyclobutene undergoes reactions at ambient temperature in 5 min [77, 72], complete reaction with the less reactive perfluorocyclobutene requires 14 days [7J] (equation 8). Note also the regioselectivity observed in the reaction of diazomethane with 3,3-difluorocyclobutene [14] (equation 9)... 

Similarly, partially fluorinated and perfluorinated methylenecyclopropanes [57, 52], cyclopropenes [55, 84, 55], cyclobutenes [75, 56], and bicychc alkenes [57, 55, 59, 90] apparently denve dienophilic reactivity from relief of their ground-state strain during reaction Thus 2,2-difluoromethylenecyclopropane and perfluoromethylenecyclopropane undergo exclusive [244] cycloadditions [57, 52] (equations 72 and 73), whereas (difluoromethylene)cyclopropane undergoes only [24-2] cycloadditions [57]... 

An interesting probe of reactivity was presented by Burton in his study of cycloadditions of l,2-disubstituted-3,3,4,4-tetrafluorocyclobutenes and 1,2-disub-stituted-3,3,4,4,5,5-hexaf1uorocyclopentenes with butadiene, 2-methylbutadiene, and 2,3-dimethylbutadiene [86], On the basis of the extent of their conversions to adducts, the relative reactivities of the cyclobutenes and of the cyclopentenes are as shown in equation 74. A typical reaction is shown in equation 75. 

A more conventional cycloaddition occurs with activated acetylenes, however, the intermediate cyclobutene adducts undergo rearrangement to give insertion of two carbon atoms into the enamine chain (55). Thus the enamine (16) reacted with methyl propiolate to give the dienamino ester (73), presumably via the cycloaddition product (65a). 

Enamino ketones and esters also react with dimethyl acetylenedicarboxylate (67). Again cycloaddition appears to occur and the unstable cyclobutene intermediates rearrange to give insertion of two carbon atoms. 

The types of cycloadditions discovered for enamines range through a regular sequence starting with divalent addition to form a cyclopropane ring, followed by 1,2 addition (i) of an alkene or an alkyne to form a cyclo-cyclobutane or a cyclobutene, then 1,3-dipolar addition with the enamine the dipolarophile 4), and finally a Diels-Alder type of reaction (5) with the enamine the dienophile. 

Dimethyl acetylenedicarboxylate (80) undergoes initial 1,2 cycloaddition with acyclic enamines to form cyclobutene intermediates which immediately decompose into acyclic dienaminodiesters (94,95). When an acyclic n/c-enediamine is used instead of a simple acyclic enamine, a dienediamino-diester is produced via a cyclobutene intermediate (95a). A cyclization reaction of dimethyl acetylenedicarboxylate with an acyclic enaminoketone... 

The reaction of ethyl 2,2-diethoxyacrylate with alkynylalkoxycarbene complexes affords 6-ethoxy-2H-2-pyranylidene metal complexes [92] (Scheme 48). The mechanism that explains this process is initiated by a [2+2] cycloaddition reaction (see Sect. 2.3), followed by a cyclobutene ring opening to generate a tetracarbonylcarbene complex. This complex can be isolated and on standing for one day at room temperature renders the final 6-ethoxy-2Ff-pyranylidene pentacarbonyl complex. This last transformation requires the formal transfer of one carbonyl group and one proton from the diethoxy methylene moiety to the metal and to the C3 2H-pyranylidene ring, respectively, with concomitant cyclisation. Further studies on this unusual transformation have been extensively performed by Moreto et al. [93]. 

In a similar process, tertiary enaminones react with alkynylcarbene complexes to give the corresponding pyranylidene complexes following a reaction pathway analogous to that described above. First, a [2+2] cycloaddition reaction between the alkynyl moiety of the carbene complex and the C=C double bond of the enamine generates a cyclobutene intermediate, which evolves by a conrotatory cyclobutene ring opening followed by a cyclisation process [94] (Scheme 49). 

Intermolecular [4C+2S] cycloaddition reactions where the diene moiety is contained in the carbene complex are less frequent than the [4S+2C] cycloadditions summarised in the previous section. However, 2-butadienylcarbene complexes, generated by a [2+2]/cyclobutene ring opening sequence, undergo Diels-Alder reactions with typical dienophiles [34,35] (Scheme 59). Also, Wulff et al. have described the application of pyranylidene complexes, obtained by a [3+3] cycloaddition reaction (see Sect. 2.8.1), in the inverse-electron-demand Diels-Alder reaction with enol ethers and enamines [87a]. Later, this strategy was applied to the synthesis of steroid-like ring skeletons [87b] (Scheme 59). 

Aumann et al. have observed an unusual formal [6S+2C] cycloaddition reaction when they performed the reaction between an alkynylcarbene complex and 1-aminobenzocyclohexenes. The solvent used in this reaction exerts a crucial influence on the reaction course and products of different nature are obtained depending on the solvent chosen. However, in pentane this process leads to cyclooctadienylcarbene complexes in a reaction which can be formally seen as a [6S+2C] cycloaddition [117] (Scheme 71). The formation of these compounds is explained by an initial [2+2] cycloaddition reaction which leads to a cy-clobutenylcarbene derivative which, under the reaction conditions, undergoes a cyclobutene ring opening to furnish the final products. 

The cationic pathway allows the conversion of carboxylic acids into ethers, acetals or amides. From a-aminoacids versatile chiral building blocks are accessible. The eliminative decarboxylation of vicinal diacids or P-silyl carboxylic acids, combined with cycloaddition reactions, allows the efficient construction of cyclobutenes or cyclohexadienes. The induction of cationic rearrangements or fragmentations is a potent way to specifically substituted cyclopentanoids and ring extensions by one-or four carbons. In view of these favorable qualities of Kolbe electrolysis, numerous useful applications of this old reaction can be expected in the future. 

Construct a diagram like Figure 9.18 for (a) the Hiickel closure of butadiene to cyclobutene and (b) the Hiickel and Mobius cycloadditions of butadiene and ethylene. 

Reinhoudt et al.53) have reported the first synthesis of a monocyclic thiepin stabilized by electronic effects of the substituents. This synthesis utilizes the idea described in Section 2.3.3. 3-Methyl-4-pyrrolidinothiophene (85a) was treated in deuteriochloroform at —30 °C with dimethyl acetylenedicarboxylate. H-NMR monitoring of the reaction indicated that a [2 + 2]cycloaddition proceeded slowly at this temperature giving the 2-thiabicyclo[3.2.0]heptadiene (86a) which rearranged via ring opening of the cyclobutene moiety to the 4-pyrrolydinylthiepin (87a). At the... 

The forerunner in the Co-catalyzed [2+2+2] cycloaddition domino processes was that identified by Vollhardt and colleagues [273], with their excellent synthesis of steroids. Reaction of 6/4-1 with [CpCo(CO)2] gave compound 6/4-3 with an aromatic ring B via the intermediate 6/4-2. In this process, trimerization of the three alkyne moieties first takes place, and this is followed by an electrocyclic ring opening of the formed cyclobutene to give o-quinodimethane. This then undergoes a Diels-Alder reaction to provide the steroid 6/4-3 (Scheme 6/4.1). 

Cycloaddition of the carbene chromium complexes 97 with CO incorporation provides a versatile method for naphthol synthesis, in which the metallacy-clic intermediates 99 are involved [47]. An alternative entry to 101 is achieved by metal carbonyl-catalyzed rearrangement of the cyclopropenes 98 via the same metalla-cyclobutenes 99 and vinylketene complexes 100 [52], Mo(CO)6 shows a higher activity than Cr(CO)6 and W(CO)6. The vinylketene complex 103 is formed by the regioselective ring cleavage of 1,3,3-trimethylcyelopropene 102 with an excess of Fe2(CO)9 [53]. (Scheme 35 and 36)... 

Palladocyclopentadiene reagent promotes [2 + 2]-cycloaddition of suitably positioned enynes to form cyclobutenes which undergo symmetry allowed ring opening to form 1,3-dienes with a bridgehead double bond (equation 149)264. 

The cyclobutene (268) was constructed through the photo[2 + 2]cycloaddition of acetylene to anhydromevalonolactone, which was followed by DIBAL reduction 92). 

The few reported [2 + 2] cycloadditions of alkoxyallenes illustrated in Eqs 8.29 and 8.30 are probably of less synthetic importance. Cyclobutene derivative 162 could be prepared in good yield by cycloaddition of tetramethoxyallene 39 and acetylenedicar-boxylate 161 [105], whereas the reaction of 1,1-diethoxyallene 163 and phenylisocya-nate (164) gave the expected /3-lactam 165 [106]. Another example for a [2 + 2] cycloaddition is the dimerization of 39 described by Saalfrank et al. [107]. 

The thermal [2 + 2]-cycloaddition of allenyne 68 was used for the preparation of a naphtho[a]cyclobutene skeleton 69 [66]. 

With the silyl-substituted difluoroallene 245 and molybdenum hexacarbonyl, the expected [2+ 2+ 1] cycloaddition is not observed. CO is not incorporated and the cyclobutene derivatives 246 can be isolated in good yields (Scheme 15.77) [148]. 

We break the C4-C6 bond, and we form C3-C8 and C4-C9. The formation of the latter two bonds and the fact that we re forming a cyclobutanone suggests a [2+2] cycloaddition between a ketene at C3=C4=0 and the C8=C9 n bond. We can generate the requisite C3=C4 n bond by electrocyclic ring opening of the cyclobutene ring in the S.M. 

---