Ionic cycloaddition

Initially, a complex of nitroalkene (42) with LA (A) is reversibly formed. The efficient concentration of the latter is determined by the reaction conditions and the nature of heterodiene (42) and LA. This complex acts as a Michael substrate and adds alkene (43) to give bipolar adduct B, which undergoes cycliza-tion to give cationic intermediate C. The latter eliminates LA to yield target nitronate (35). In the case of nonconcerted cycloaddition, ionic intermediate B can undergo different isomerization reactions, some of which are considered below. The stereoselectivity of the process depends on the reactive conformation... 

Cycloadditions are not restricted to the reactions of combinations of neutral dienes and dienophiles. There are examples of corresponding reactions involving ionic intermediates. The addition of 2-methylallyl cation to cyclopentadiene is an example ... 

With a suitable combination of electron-deficient fluoroalkene and electron-rich addend, cycloaddition can proceed by a dipolar mechanism involving zwitte-rion intermediates Like Us isomer, l,2-bis(trifluoromethyl)-l,2-dicyanoethylene [85], l,l-bis(trifluoromethyl)-2,2-dicyanoethylene forms cyclobutanes by an ionic mechanism [104, 105, 106] (equations 39 and 40)... 

The reactions of electrophilic alkenes (alkenes attached to electron-withdrawing groups) with enamines produce one or more of the following products simple alkylation (2), 1,2 cycloaddition (3), and 1,4 cycloaddition (4). Competition with C alkylation by N alkylation is inconsequential and therefore will be largely ignored (5,7). A stepwise ionic mechanism leading to these products necessarily involves the formation of a zwitterion intermediate (1) as the first step, which is then followed either by one of the... 

The initial reaction between a ketene and an enamine is apparently a 1,2 cycloaddition to form an aminocyclobutanone adduct (58) (68-76a). This reaction probably occurs by way of an ionic zwitterion intermediate (75). The thermal stability of this adduct depends upon the nature of substituents Rj, R2, R3, and R. The enolic forms of 58 can exist only if Rj and/or R4 are hydrogens. If the enamine involved in the reaction is an aldehydic enamine with no 3 hydrogens and the ketene involved is di-substituted (i.e., R, R2, R3, and R4 are not hydrogens), then the cyclo-butanone adduct is thermally stable. For example, the reaction of dimethyl-ketene (61) with N,N-dimethylaminoisobutene (10) in isopropyl acetate... 

The effect of substitutents at the C3 and C6 positions of the azepine ring is much more dramatic in that they force the 1//-azepine into a competing [6 + 2] Tt-cydoaddilion at the Cl —Cl positions.6 1 In fact, at room temperature [6 + 2] cycloaddition by a kinetically controlled, non-concerted, ionic process appears to be dominant, since on treating a mixture of ethyl 3,6-dimethyl- and ethyl 2,5-dimethyl-l//-azepine-l-carboxylate with less than a molar equivalent of ethenetctracarbonitrile, only the [6 + 2] cycloadduct 10 of the 3,6-dimethyl-l//-azepine is formed. 

The conformationally locked racemic enamine, 4-(4-rOT-butyl-1-cyclohexenyl)morpholine, reacts with (l-nitroethenyl)benzene to give a mixture of diastereomeric 1,2-oxazine 2-oxides 1 and 2 (ratio 1/2 75 25). Whether these arise via an ionic or a cycloaddition mechanism is unclear. Hydrolysis of 1 and 2 with dilute acid gave a 80 20 mixture of trans- and cis-ketones, 3 and 414. 

Earle and coworkers [54] have performed Diels-Alder reactions in neutral ionic liquids. The results of reactions of cyclopentadiene with dimethyl maleate, ethyl acrylate and acrylonitrile are reported in Table 6.10. The cycloadditions proceeded at room temperature in all of the ionic liquids tested, except [BMIMJPF4, and gave almost quantitative yields after 18-24h. The endo/exo selectivity depends on dienophile. No enantioselectivity was observed in the [BMIM] lactate reaction. 

The use of Lewis acids (ZnU, BF3 Et20) in ionic liquids, tested in the cycloaddition of but-3-en-2-one with isoprene, increases both the rate and selectivity of the reaction. The ionic liquid remains catalytically active after the work-up and can be reused. 

Dell C. P. Cycloaddition in Synthesis Contemporary Organic Synthesis 1997 4 87 Keywords natural products, metal catalyzed, asymmetric reactions, Ionic reactions, transannular reactions, tethered reactions, tandem reactions, benzo-qulnones, quinodimethanes, hefero-Dlels-Alder reactions... 

However, most of the reactions are reported to be slow, taking up to 12 h for complete conversion of the starting materials. A Diels-Alder reaction of the pyrazinone scaffold with dimethyl acetylenedicarboxylate (DMAD) [57] has been studied in view of investigating the swiftness of this cycloaddition-fragmentation protocol (Scheme 20). The authors investigated the reaction with DMAD (lOequiv) under microwave irradiation at an elevated temperature of 190 °C, using small amounts of ionic liquid (bmimPFe) in... 

Like the similar cycloaddition of ketenes to alkenes (15-61), most of these reactions probably take place by the di-ionic mechanism c (p. 1078). P-Lactams have also been prepared in the opposite manner by the addition of enamines to isocyanates ... 

A dipolarophile bearing an ionic group and an associated counterion provides enhanced selectivity as has been recently demonstrated by Raposo and Wilcox [14]. Cycloaddition of benzonitrile 4 and the uncharged amine 5 a (a chiral phenylmaleimide derivative) in THE or chloroform provides a mixture of cycloadducts 6-9a in 1 4 4 4 diastereomeric ratio (i.e., 8 5 in favor of the methyl face approach of the dipolarophile. The ortho-substituents of the... 

There are many reports for nitration of alkenes using various nitrating agents, which proceeds via an ionic or radical addition process.49 Nitration of cyclohexene with acetyl nitrate gives a mixture of 3-and y-nitrocyclohexenes, 1,2-nitroacetate, and 1,2-nitronitrate. This reaction is not a simple ionic or radical process instead, [2+2] cycloaddition of nitryl cation is proposed.50... 

The general procedure used for the synthesis of [l,2,3]triazolo[l,2-tf][l,2,4]benzotriazin-l-5(6//)-dione derivatives 506 is shown in Scheme 86. Ionic 1,3-dipolar cycloaddition of the appropriate azide 503 to ethyl phenylacetates gives l-(2-nitrophenyl)-4-aryl-5-oxo[l,2,3]triazoles 504. Catalytic reduction of these compounds affords the corresponding amines 505. Cyclocondenzation of these amines to the final tricyclic compounds 506 is performed using triphosgene in anhydrous tetrahydrofuran solution at room temperature (Scheme 86) <2005JME2936>. 

When zinc and a,a -dibromo-o-xylene are irradiated with ultrasonic waves at room temperature, synthetically useful quantities of the reactive intermediate, o xylylene, are generated which can be treated in situ with activated olefins to give good yields of cycloaddition products(30). Chew and Ferrier used this methodolgy to generate a-xylylene for the synthesis of optically pure functionalized hexahydroanthracenes(31). The reaction with lithium takes a different course(19). Rather than generate the -xylylene intermediate, ionic species are produced. The two fates of a, a -dibromo-o-xylene are presented in the scheme below ... 

The concept of performing microwave synthesis in room temperature ionic liquids (RTIL) as reaction media has been applied to several different organic transformations (Scheme 4.18), such as 1,3-dipolar cycloaddition reactions [54], catalytic transfer hydrogenations [55], ring-closing metathesis [56], the conversion of alcohols to alkyl halides [57, 58], and several others [59-61],... 

Scheme 6.91 Diels-Alder cycloaddition reactions in ionic liquid-doped solvents.

Scheme 6.93) [192]. Using either of the two solvent systems, all studied cycloaddition reactions were completed in less than 1 min upon microwave irradiation at 50 °C employing 3 mol% of the catalyst. An additional advantage of using the ionic liquid l-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6) as solvent is that it facilitates catalyst recycling. 

Inter- and intramolecular hetero-Diels-Alder cycloaddition reactions in a series of functionalized 2-(lH)-pyrazinones have been studied in detail by the groups of Van der Eycken and Kappe (Scheme 6.95) [195-197]. In the intramolecular series, cycloaddition of alkenyl-tethered 2-(lH)-pyrazinones required 1-2 days under conventional thermal conditions involving chlorobenzene as solvent under reflux conditions (132 °C). Switching to 1,2-dichloroethane doped with the ionic liquid l-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6) and sealed-vessel microwave technology, the same transformations were completed within 8-18 min at a reaction temperature of 190 °C (Scheme 6.95 a) [195]. Without isolating the primary imidoyl chloride cycloadducts, rapid hydrolysis was achieved by the addition of small amounts of water and subjecting the reaction mixture to further microwave irradia-... 

The approach precludes the usage of volatile organic solvents, is relatively much faster, efficient, and eco-friendly. Significant rate enhancements are reported in the 1,3-dipolar cycloaddition reactions including the use of covalently grafted dipolaro-philes on the ionic liquids [189]. 

This chapter will deal with applications of microwave irradiation in the synthesis of heterocycles by a variety of means, excluding cycloadditions, which will be described in the next chapter. We have chosen to report first reactions in solution in organic solvents, then heterogeneous reactions without solvent under a variety of conditions, and finally to deal with emerging techniques which employ ionic liquids. 

Previous work [111] by our group has demonstrated that RTIL-catalyzed 1,3-dipolar cycloaddition under the action of microwave irradiation leads to dramatically shorter reaction times with better yields of isolated products. We have recently investigated the reactivity of the formyl group covalently grafted on the ionic liquid phase 75 in the Knoevenagel reaction with malonic derivatives 76 [112], as shown in Scheme 8.76. 

An unusual solvent effect was observed in cycloadditions of aromatic nitrile N-oxides with alkyl-substituted p-benzoquinones in ethanol-water (60 40) the reaction rates were 14-fold greater than those in chloroform (148). The use of ion pairs to control nitrile oxide cycloadditions was demonstrated. A chiral auxiliary bearing an ionic group and an associated counterion provides enhanced selectivity in the cycloaddition the intramolecular salt effect controls the orientation of the... 

Reaction of the digermene 57 with diazomethane or trimethylsilyldiazomethane yields the azadigermiranes 58 via a [2+l]-cycloaddition (Equation (119)).158 Coupling of a cyclic carbene and a cyclic germylene furnishes the zwitter-ionic species 59 (Equation (120)).159... 

Dipolar species have been observed in the cycloaddition of polar intermediates. Thus cyclobutanes can be formed by non concerted processes involving zwitter ionic intermediates. The combination of an electron rich alkene (enamimes, enol ethers) and an alkene having electron withdrawing groups (nitro a cyano substituted alkenes) first gives a zwitter ion which can rotate about the newly formed bond before cyclization and gives both a cis and a trans adduct. 

Diels-Alder reactions between dienes and highly reactive dienophiles such as alkyl vinyl ketones can be carried out using the corresponding acetals in order to prevent polymerization of the dienophile. Activation of the masked dienophiles to undergo ionic [4 + 2] cycloadditions with dienes can be by EGA using the conditions in Scheme 18 [44]. Yields in the range 20 to 85% were obtained depending on the... 

Kobayashi, S. J0rgensen, K. A. (Eds.) Cycloaddition Reactions in Organic Synthesis, Wiley-VCH, Weinheim, Germany, 2002 Carmichael, A. J., Earle, M. J., Holbrey, J. D. et al. The Heck reaction in ionic liquids a multiphasic catalyst system, Org. Lett., 1999, 1, 997-1000 Forsyth, S. A., Gunaratne, H. Q. N. Hardacre, C. et al. Utilisation of ionic liquid solvents for the synthesis of Lily-of-the-Valley fragrance beta-Lilial (R), 3-(4-t-butylphenyl)- 2-methylpropanal, J. Mol. Catal. A-Chem., 2005, 231(1-2), 61-66. 

The prototypes of intra-solid reactions are the [2-1-2] photochemically activated cycloaddition reactions that constitute the basis of Schmidt s work on topochemical reactions [36]. It is now clear, however, that the topochemical postulate, though correct and of wide applicability, cannot account for many solid-state processes, in particular those implying high molecular or ionic mo-... 

Then the potential for asymmetric induction of some of these chiral ionic liquids was investigated. The aza Diels-Alder cycloaddition between the enantiomericaUy pure (/ )-imine 31 and the Danishefsky s diene 32 was chosen as model asymmetric reaction (Scheme 8). The reaction was performed at room temperature for 5 h using 0.5 equiv. of ionic liquid and 1.5 equiv. of diene. In the absence of chiral ILs, the same coupling required a Lewis acid catalyst (0.1 equiv. of ZnC ) and afforded the main product 33 in 60% yield and low diastereoselectivity (32% de). 

---