Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Cycloaddition acrylonitriles

The reaction of cyclohexene with the diazopyruvate 25 gives unexpectedly ethyl 3-cyclohexenyl malonate (26), involving Wolff rearrangement. No cyclo-propanation takes place[28]. 1,3-Dipolar cycloaddition takes place by the reaction of acrylonitrile with diazoacetate to afford the oxazole derivative 27[29]. Bis(trimethylstannyl)diazomethane (28) undergoes Pd(0)-catalyzed rearrangement to give the A -stannylcarbodiimide 29 under mild conditions[30]. [Pg.532]

In the case of enamines derived from aldehydes a cycloaddition to give a cyclobutane occurs (48-50). Thus the enamine (16) reacted with methyl acrylate in acetonitrile to give a 91 % yield of methyl 2-dimethylamino-3,3-dimethylcyclobutane carboxylate (56). Similarly, treatment of (16) with diethylmaleate at 170° gave a 70% yield of diethyl 4-dimethylamino-3,3-dimethyl-l,2-cyclobutanedicarboxylate (57), and 16 and acrylonitrile gave a 65% yield of 2-dimethylamino-3,3-dimethylcyclobutanecarbonitrile (58). [Pg.126]

Dienamine 56a has been reported to undergo a 1,4 cycloaddition with acrylonitrile to form bicycloaminonitrile 57 in a 74% yield (61). A recent report has indicated that both possible 1,4-cycloaddition adducts are obtained from the reaction of acrylonitrile with a 1 1 equilibrium mixture of the linear- and cross-conjugated isomers of dienamine 56b (61a). [Pg.224]

LUMO energies for free and complexed acrylonitrile are. 103 and. 089 au (65 and 56 kcal/mol), respectively. On the basis of orbital energies, would you expect BF3 to enhance, retard, or leave unchanged the rate of Diels-Alder cycloaddition ... [Pg.275]

Dihydropyridines 28 behave as enamines and undergo [2 - - 2] cycloaddition reactions with dienophiles such as acrylonitrile (29) and dimethyl acetylenedicar-boxylate (32). For instance, A -alkyl-l,4-dihydropyridine 28 reacts with 29 to give... [Pg.275]

The [2 + 2] cycloaddition reaction of A -benzyl-l,4-dihydropyridine 34b with acrylonitrile, followed by catalytic reduction gave two pairs of diastereoisomeric amides 36 and 37 with a low diastereomeric excess, probably due to the large distance between the asymmetric center and the site of acrylonitrile attack. Compounds 36 and 37 were resolved into the four individual diastereoisomers (ca 5% for compound 36 and 15% for 37) [97JCR(M)321], Irradiation of 1,4-dibenzyl-1,4,5,6-tetrahydropyridine 38 in the presence of 29 gave two stereoisomers. [Pg.277]

Steady-state kinetics. The cycloaddition reaction between the singlet ground state of 2-isopropylidene cyclopentane-1,3-diyl ( = S ) with acrylonitrile (A) is believed to occur by way of a biradical intermediate (BR),17... [Pg.98]

The reaction of methyl acrylate and acrylonitrile with pentacarbonyl[(iV,iV -di-methylamino)methylene] chromium generates trisubstituted cyclopentanes through a formal [2S+2S+1C] cycloaddition reaction, where two molecules of the olefin and one molecule of the carbene complex have been incorporated into the structure of the cyclopentane [17b] (Scheme 73). The mechanism of this reaction implies a double insertion of two molecules of the olefin into the carbene complex followed by a reductive elimination. [Pg.107]

The Diels-Alder reactions of cyclopentadiene with methyl vinyl ketone and acrylonitrile are accelerated when carried out in water in the presence of jS-CD but are slower with a-CD [65a] (Scheme 4.16). This is in agreement with the observation that the transition states of these cycloadditions fit into the hydro-phobic cavity of P-CD but not in the smaller a-CD cavity. [Pg.170]

Rideout and Breslow first reported [2a] the kinetic data for the accelerating effect of water, for the Diels Alder reactions of cyclopentadiene with methyl vinyl ketone and acrylonitrile and the cycloaddition of anthracene-9-carbinol with N-ethylmaleimide, giving impetus to research in this area (Table 6.1). The reaction in water is 28 to 740 times faster than in the apolar hydrocarbon isooctane. By adding lithium chloride (salting-out agent) the reaction rate increases 2.5 times further, while the presence of guanidinium chloride decreases it. The authors suggested that this exceptional effect of water is the result of a combination of two factors the polarity of the medium and the... [Pg.252]

Earle and coworkers [54] have performed Diels-Alder reactions in neutral ionic liquids. The results of reactions of cyclopentadiene with dimethyl maleate, ethyl acrylate and acrylonitrile are reported in Table 6.10. The cycloadditions proceeded at room temperature in all of the ionic liquids tested, except [BMIMJPF4, and gave almost quantitative yields after 18-24h. The endo/exo selectivity depends on dienophile. No enantioselectivity was observed in the [BMIM] lactate reaction. [Pg.279]

Because of the relative instabihty of many trimethylsilyl nitronates 1036, 1037, they should be reacted in situ with olefins 1053 [103-105] or acetylenes [127] to generate the isooxazolidines 1054 [103-105, 107-117, 119-133] or isoxazoles [127] (Scheme 7.37) The isoxazolidines 1054 with R2=H readily ehminate trimethylsilanol 4 in the presence of acids such as TsOH to form the isoxazolines 1055 in high yields [104, 105] (Scheme 7.37 cf. also the cycloadditions with acrylonitrile in Scheme 7.42). [Pg.173]

A singlet naphthalene or a singlet exciplex is thought to be the reactive species in this reaction since the quantum yield of cycloaddition parallels the quenching of naphthalene fluorescence by acrylonitrile. [Pg.534]

The formation of 9-104 proceeds through several equilibrium steps, but the process has been shown to be highly efficient when dienophiles such as maleimides 9-103, acetylene dicarboxylates 9-105, maleic anhydride (9-107) or acrylonitrile (9-108) are present in the reaction mixture. Thus, the formed butadienes 9-104 are trapped in a [4+2] cycloaddition and thereby the equilibria are shifted to the product side. The cycloadducts 9-102, 9-106, 9-109 and 9-110 are formed in good to excellent yields with high diastereoselectivity. [Pg.557]

Reductions of y-nitroketones yield cyclic nitrones, which undergo inter- and intramolecular cycloaddition to various alkenes. The result of addition to acrylonitrile is shown in Eq. 8.42, in which a mixture of regio- and stereoisomers is formed.65... [Pg.249]

A theoretical study based on PM3 frontier molecular orbital (FMO) and potential energy surface (PES) analysis at the restricted Hartree-Fock (RHF)/6-31+G level was performed to examine the reaction of l-amino-2-ethoxycarbonyl-pyridinium mesitylenesulfonate and acrylonitrile in the presence of Hilnig s base leading to the formation of l,2-dihydropyrido[l,2-A]pyridazinium inner salt 17 <1999JOC9001>. The calculations indicated that both the [3+2] cycloaddition reaction and the ring expansion occurred in a concerted manner rather than through a stepwise mechanism via a zwitterionic intermediate 16 (Scheme 1). [Pg.82]

Jug and co-workers investigated the mechanism of cycloaddition reactions of indolizines to give substituted cycl[3,2,2]azines <1998JPO201>. Intermediates in this reaction are not isolated, giving evidence for a concerted [8+2] cycloaddition, which was consistent with results of previous theoretical calculations <1984CHEC(4)443>. Calculations were performed for a number of substituted ethenes <1998JPO201>. For methyl acrylate, acrylonitrile, and ethene, the concerted [8+2] mechanism seems favored. However, from both ab initio and semi-empirical calculations of transition states they concluded that reaction with nitroethene proceeded via a two-step intermolecular electrophilic addition/cyclization route, and dimethylaminoethene via an unprecedented two-step nucleophilic addition/cyclization mechanism (Equation 1). [Pg.713]

Formation of the ylide from the substituted pyrrolopyrazine 374 and subsequent [3+2] dipolar cycloaddition with a range of dipoloarophiles gives rise to the substituted 5 6 5 system 375 and the following examples are illustrative (Scheme 29) <1997T9341>. Reaction with acrylonitrile followed by oxidation with DDQ leads to the dihydroinda-cene 376. [Pg.752]

Cycloaddition of the tetrahydropyrrolopyridine-2-carbaldehyde 153 with electron-depleted alkenes in the presence of a base leads to products, the 111 NMR spectra of which are consistent with their formulation as 154 rather than 155. In the case of the acrylonitrile adduct, the initially formed pyrrolizine reacts with another molecule of acrylonitrile to give a cyanoethyl-substituted derivative <1998CHE1418> (Scheme 43). [Pg.798]

EvenPd(OAc)2 is not effective in catalyzing the cyclopropanation of a,P-unsaturated nitriles by ethyl diazoacetate. Instead, vinyloxazoles 92 are formed from acrylonitrile or methacrylonitrile by carbenoid addition to the CsN bond 143 Diethyl maleate and diethyl fumarate as well as polyketocarbenes are by-products in these reactions the 2-pyrazoline which would result from initial [3 + 2] cycloaddition at the C=C bond and which is the sole product of the uncatalyzed reaction at room temperature, can be avoided completely by very slow addition of the diazoester... [Pg.125]

The first [2 + 2] cycloaddition of methylenecyclopropane which has been reported involves the use of tetrafluoroethylene (482) (Table 38, entry 1) [131], an olefin having a high tendency to give cycloadditions in a [2 + 2] fashion, which are considered to occur in a two-step process involving diradical intermediates. In the same article, the author reports unsuccessful attempts to react methylenecyclopropane with maleic anhydride or acrylonitrile [131]. [Pg.79]

The substitution of the exo-methylene hydrogen atoms of MCP with halogens seems to favor the [2 + 2] cycloaddition reaction by stabilizing the intermediate diradical. Indeed, chloromethylenecyclopropane (96) reacts with acrylonitrile (519) to give a diastereomeric mixture of spirohexanes in good yield (Table 41, entry 2) [27], but was unreactive towards styrene and ds-stilbene. Anyway, it reacted with dienes (2,3-dimethylbutadiene, cyclopentadiene, cyc-lohexadiene, furan) exclusively in a [4 + 2] fashion (see Sect. 2.1.1) [27], while its... [Pg.81]

In contrast, perfluoromethylenecyclopropane (105) gave with butadiene and other dienes exclusively the [4 + 2] cycloadducts (see Sect. 2.1.2) [29]. Moreover, it failed to give any [2 + 2] cycloaddition, either with itself and with styrene or acrylonitrile at 150-175 °C. The only product formally deriving from... [Pg.82]

The homoadamantane derived nitrone 361 (Equation 72) reacts with acrylonitrile to give the bicyclic 5-vinyl-2,3-dihydro-l,2,4-oxadiazole 362 in 19% yield, with the major product being that from cycloaddition to the alkene moiety... [Pg.298]

Many Diels-Alder [4 + 2] cycloadditions show a powerful pressure-induced acceleration, which is often turned to good synthetic purpose as discussed in Section III.A.2. Table 1 illustrates the effect of pressure on the Diels-Alder reaction of isoprene with acrylonitrile as a representative example. This reaction is accelerated by a factor of 1650 by raising the pressure from 1 bar to 10 kbar28. [Pg.552]

The intramolecular and intermolecular deuterium isotope effects in the cycloaddition of acrylonitrile to allene (equation 98) have been studied by Dolbier and Dai231,232. The intramolecular KIEs in the allene-acrylonitrile system were found to be 1.21 0.02 at 206°C and 1.14 0.02 at 225°C. A negligible intermolecular SKIE was found in the reaction of the mixture of tetradeuteriated and undeuteriated allene using a limited amount of acrylonitrile (ku/ku) = 1.04 0.05 at 190-210 °C for D0/D4 allene. An equilibrium deuterium IE of 0.92 0.01 was found at 280-287 5°C (15-45 h reaction time). [Pg.858]

This regioselectivity is practically not influenced by the nature of subsituent R. 3,5-Disubstituted isoxazolines are the sole or main products in [3 + 2] cycloaddition reactions of nitrile oxides with various monosubstituted ethylenes such as allylbenzene (99), methyl acrylate (105), acrylonitrile (105, 168), vinyl acetate (168) and diethyl vinylphosphonate (169). This is also the case for phenyl vinyl selenide (170), though subsequent oxidation—elimination leads to 3-substituted isoxazoles in a one-pot, two-step transformation. 1,1-Disubstituted ethylenes such as 2-methylene-1 -phenyl-1,3-butanedione, 2-methylene-1,3-diphenyl- 1,3-propa-nedione, 2-methylene-3-oxo-3-phenylpropanoates (171), 2-methylene-1,3-dichlo-ropropane, 2-methylenepropane-l,3-diol (172) and l,l-bis(diethoxyphosphoryl) ethylene (173) give the corresponding 3-R-5,5-disubstituted 4,5-dihydrooxazoles. [Pg.22]

Aryl-5-cyano-2-isoxazolines, possessing liquid crystal properties (smectic phases A or E) have been synthesized, 1,3-dipolar cycloaddition of nitrile oxides to acrylonitrile being the key step (532). For example, nitrile 462 has been obtained in 66% yield from substituted benzaldoxime and acrylonitrile via in situ generated nitrile oxides. [Pg.106]

Dipolarophiles D4. 1,3-Dipolar cycloaddition between acrylonitrile (D4) and chiral nonracemic nitrones is a key step in an efficient synthetic route to isoxa-zolidinyl analogs of thiazofurin (540) (Scheme 2.253). Opposite diastereofacial induction was observed when the chiral group was placed at either the carbon or the nitrogen atom of the nitrone function (753). [Pg.331]

Electron-deficient olefins such as acrylonitrile can participate in the cross [2 + 21-cycloaddition with allenes. 3-Methylenecydobutanecarbonitrile (17) was obtained in 60% yield by the reaction of allene with a large excess of acrylonitrile under autogenous pressure at 200 °C [16]. Initial bond formation takes place between the central carbon of allene and the terminal carbon of acrylonitrile to give a diradical species, which cydizes to form the cydoadduct [17]. [Pg.733]

Cycloaddition reactions of monofluoroallene (MFA) (24) and 1,1-difluoroallene (DFA) (25) with acrylonitrile occurred at either C1-C2 or C2-C3 bond of the fluoroal-lenes, respectively, affording 3-methylenecyclobutanecarbonitrile derivatives [21]. [Pg.734]

Pasto and colleagues studied the stereochemical features of the [2 + 2] cycloadditions of chiral allenes. The formation of a diradical intermediate in the cycloadditions of enan-tiomerically enriched 1,3-dimethylallene (10) with acrylonitrile (11a) and methyl acrylate (lib) (equation 4) was shown to be irreversible. 1,3-Dimethylallene recovered from the reaction mixture was shown to have the same ee as the starting material. Interestingly,... [Pg.331]

Fields et alf and Schmidt made closely parallel observations concerning polar cycloaddition of ethylenes substituted at the a-position by an electron-withdrawing group and having no substituent at the jS-position. In both cases the product observed was that to be expected if the electrophile had added to the j3-carbon atom. Since it is clear that the normal ground-state polarization of acrylonitrile (127) and methyl methacrylate (128) should tend to destabilize the cation produced by j8-addition, it was concluded that the orientation of polar cycloadditions could not be predicted by the rules of electrophilic addition and that this apparent anomaly pointed toward a more concerted type of cycloaddition reaction. [Pg.318]

All the numerous other polar cycloaddition reactions studied show a regiospecificity explicable only on polar grounds and thus warrant examination of how acrylonitrile (127) and methyl methacrylate (128)... [Pg.318]


See other pages where Cycloaddition acrylonitriles is mentioned: [Pg.64]    [Pg.222]    [Pg.34]    [Pg.69]    [Pg.224]    [Pg.1077]    [Pg.32]    [Pg.10]    [Pg.194]    [Pg.82]    [Pg.165]    [Pg.456]    [Pg.140]    [Pg.8]   
See also in sourсe #XX -- [ Pg.62 ]




SEARCH



Acrylonitrile, addition 1,2-cycloaddition with

Allene-acrylonitrile cycloaddition

© 2024 chempedia.info