Cross-linked gel

Copolymers of sodium acrylate with sodium 2-acrylamido-2-methylpropane sulfonate (AMPS) or /V, /V- dim ethyl acryl am i de (52) have been used to prepare cross-linked systems at high temperatures and salinity. Chromium cross-linked gels, prepared from a 3 1 blend of partially hydrolyzed... 

Divinylbenzene copolymers with styrene are produced extensively as supports for the active sites of ion-exchange resins and in biochemical synthesis. About 1—10 wt % divinylbenzene is used, depending on the required rigidity of the cross-linked gel, and the polymerization is carried out as a suspension of the monomer-phase droplets in water, usually as a batch process. Several studies have been reported on the reaction kinetics (200,201). 

Incorporation of a conductive salt into similar cross-linked gels can be used in preparing a devise to measure and transmit electrical signals (535). 

The size separation of proteins has been routinely called gel filtration because of the historic use of cross-linked gels for this application. Specially modified Zorbax PSM columns, Zorbax GF-250 and Zorbax GE-450, are used for separating proteins by size. These columns are packed with porous silica micro-... 

A. Type 2 chemical cross-linked gels, polyacrylamide... 

B. Type 3 physical cross-linked gels, agarose... 

Chrambach, A Rodbard, D, Polyacrylamide Gel Electrophoresis, Science 172, 440, 1971. Chu, B Yeh, F Sokolov, EL Starodoubtsev, SG Khokhlov, AR, Interaction of Slightly Cross-linked Gels of Poly(diallyldimethylammonium chloride) with Surfactants, Macromolecules 28, 8447, 1995. 

Since Yu< Vo/ve) for a loosely cross-linked gel, this equation predicts a very large swelling ratio at appreciable degrees of ionization i in the absence of a comparable concentration of other electrolyte. 

The a used here corresponds to the isotropic swelling factor for the cross-linked gels treated in Chapter XIII. The subscript is dropped for simplicity. 

Cross-linked gel-type functional polymers (CFPs) are organic materials built up with interconnected polymer chains [1]. Pendants hanging from the polymer chains may render CFPs reactive materials particularly suitable for anchoring metal centres removed from a liquid phase, by means of covalent or ionic bonds [2] ... 

Typically lightly cross-linked gel-type resins are prepared in the absence of any solvent or porogen. However it is possible to include relatively large volumes of thermodynamically compatible solvent in the polymerization without inducing any phase separation at the low levels of cross-linker used in gel-type resin synthesis. 

---