Poly emulsion polymerization reactor, continuous

Continuous Poly(vinyl Acetate) Emulsion Polymerization Reactors... 

Pollock, M. J., MacGregor, J. F., and Hamielec, A. E. (1981) Continuous poly (vinyl acetate) emulsion polymerization reactors dynamic modeling of molecular weight and particle size development and application to optimal multiple reactor system design. Computer Applications in Applied Polymer Science, (ed. T. Provder), ACS, Washington, pp. 209-20. 

The continuous bulk polymerization of methyl methacrylate was used as an example in Section 5.2. A stirred bulk polymerization like that used for styrene (Section 5.4) could be adapted for methyl methacrylate. A suspension process for poly(methyl methacrylate) was described in Section 5.4. The polymerization of ethyl acrylate most often is carried out in emulsion. A process such as that used for vinyl acetate is suitable (Section 16.4). Like vinyl acetate, the monomer is slightly water soluble, so true emulsion polymerization kinetics are not followed. That is, there is initiation of monomer dissolved in water in addition to that dissolved in growing polymer particles. Ethyl acrylate is distinguished by its rapid rate of propagation. Initiation of a 20% monomer emulsion at room temperature by the redox couple persulfate-metabisulflte can result in over 95% conversion in less than a minute. As with vinyl acetate polymerization, a continuous addition of monomer at a rate commensurate with the heat transfer capacity of the reactor is necessary in order to control the temperature. 

---